Closed-form deflection-limiting commands

Command signals that can move a flexible system without residual vibration and also limit the transient deflection are very useful. Unfortunately, these types of commands can be difficult to generate and have historically required intense numerical optimization. A new method for creating deflection-limiting commands is described and evaluated. The major advancement is that the problem is solvable in closed form, rather than via numerical optimization. Simulations of a mass-spring-mass system are presented as a function of deflection limit and move distance. The results compare favorably to previously presented optimized solutions.

[1]  R. L. Farrenkopf Optimal open loop maneuver profiles for flexible spacecraft , 1978 .

[2]  Clark R. Dohrmann,et al.  A comparison of maneuver optimization and input shaping filters for robotically controlled slosh-free motion of an open container of liquid , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[3]  Warren P. Seering,et al.  Slewing Flexible Spacecraft with Deflection-Limiting Input shaping , 1997 .

[4]  G. Tallman,et al.  Analog study of dead-beat posicast control , 1958 .

[5]  Tarunraj Singh,et al.  Robust time-optimal control - Frequency domain approach , 1994 .

[6]  Sudarshan P. Bhat,et al.  Precise Point-to-Point Positioning Control of Flexible Structures , 1990 .

[7]  Ichiro Watanabe,et al.  Digital shaping filters for reducing machine vibration , 1992, IEEE Trans. Robotics Autom..

[8]  Warren P. Seering,et al.  A zero-placement technique for designing shaped inputs to suppress multiple-mode vibration , 1994, Proceedings of 1994 American Control Conference - ACC '94.

[9]  R. E. Bolz,et al.  CRC Handbook of tables for Applied Engineering Science , 1970 .

[10]  P.H. Meckl,et al.  Optimized s-curve motion profiles for minimum residual vibration , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[11]  William Singhose,et al.  Multi-level optimization techniques for designing digital input shapers , 2001, Proceedings of the 2001 American Control Conference. (Cat. No.01CH37148).

[12]  Eugene M. Cliff,et al.  Time-optimal slewing of flexible spacecraft , 1992 .

[13]  Warren P. Seering,et al.  Time-Optimal Negative Input Shapers , 1997 .

[14]  Otto J. M. Smith,et al.  Feedback control systems , 1958 .

[15]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[16]  Warren P. Seering,et al.  Closed-Form Methods for Generating On-Off Commands for Undamped Flexible Spacecraft , 1999 .

[17]  R. H. Cannon,et al.  Initial Experiments on the End-Point Control of a Flexible One-Link Robot , 1984 .

[18]  Qiang Liu,et al.  Robust Time-Optimal Control of Uncertain Flexible Spacecraft , 1992 .

[19]  Qiang Liu,et al.  Robust time-optimal control of uncertain structural dynamic systems , 1993 .

[20]  H. Tokumaru,et al.  Inverse Dynamics of Flexible Robot Arms: Modeling and Computation for Trajectory Control , 1990 .