Recent advances on 3D printing graphene-based composites

[1]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[2]  Steve Upcraft,et al.  The rapid prototyping technologies , 2003 .

[3]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[4]  Andre K. Geim,et al.  Electric Field Effect in Atomically Thin Carbon Films , 2004, Science.

[5]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[6]  H W Li,et al.  Dewetting of conducting polymer inkjet droplets on patterned surfaces , 2004, Nature materials.

[7]  M. Wegener,et al.  Direct laser writing of three-dimensional photonic-crystal templates for telecommunications , 2004, Nature materials.

[8]  Takashi Kato,et al.  Functional liquid-crystalline assemblies: self-organized soft materials. , 2005, Angewandte Chemie.

[9]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[10]  Jooho Moon,et al.  Control of colloidal particle deposit patterns within picoliter droplets ejected by ink-jet printing. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[11]  Tommaso Baldacchini,et al.  Multiphoton fabrication. , 2007, Angewandte Chemie.

[12]  Shoji Maruo,et al.  Recent progress in multiphoton microfabrication , 2008 .

[13]  F. Guinea,et al.  The electronic properties of graphene , 2007, Reviews of Modern Physics.

[14]  T. Antoun,et al.  Mesoscale simulations of particulate flows with parallel distributed Lagrange multiplier technique , 2010 .

[15]  F. Melchels,et al.  A review on stereolithography and its applications in biomedical engineering. , 2010, Biomaterials.

[16]  G. Jabbour,et al.  Inkjet Printing—Process and Its Applications , 2010, Advanced materials.

[17]  B. Derby.  Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .

[18]  A. Balandin.  Thermal properties of graphene and nanostructured carbon materials. , 2011, Nature materials.

[19]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[20]  E. Johnston-Halperin,et al.  Progress, challenges, and opportunities in two-dimensional materials beyond graphene. , 2013, ACS nano.

[21]  D. Therriault,et al.  Solvent-cast three-dimensional printing of multifunctional microsystems. , 2013, Small.

[22]  Hongzheng Chen,et al.  Graphene-like two-dimensional materials. , 2013, Chemical reviews.

[23]  Abhilash Sasidharan,et al.  Confocal Raman Imaging Study Showing Macrophage Mediated Biodegradation of Graphene In Vivo , 2013, Advanced healthcare materials.

[24]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[25]  Bethany C Gross,et al.  Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. , 2014, Analytical chemistry.

[26]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[27]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[28]  J. Coleman,et al.  Electrifying inks with 2D materials. , 2014, Nature nanotechnology.

[29]  M. Boyce,et al.  Transforming Small Localized Loading into Large Rotational Motion in Soft Anisotropically Structured Materials , 2014 .

[30]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[31]  Joong Tark Han,et al.  3D Printing of Reduced Graphene Oxide Nanowires , 2015, Advanced materials.

[32]  Alexandra L. Rutz,et al.  Three-dimensional printing of high-content graphene scaffolds for electronic and biomedical applications. , 2015, ACS nano.

[33]  E. Toyserkani,et al.  Additive Manufacturing of Graphene–Hydroxyapatite Nanocomposite Structures , 2015 .

[34]  Tengfei Zhang,et al.  Broadband and Tunable High‐Performance Microwave Absorption of an Ultralight and Highly Compressible Graphene Foam , 2015, Advanced materials.

[35]  Alexandra M. Golobic,et al.  Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.

[36]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[37]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[38]  D. Therriault,et al.  3D printing of a multifunctional nanocomposite helical liquid sensor. , 2015, Nanoscale.

[39]  Wei Jiang,et al.  3D Printable Graphene Composite , 2015, Scientific Reports.

[40]  Eduardo Saiz,et al.  Printing in Three Dimensions with Graphene , 2015, Advanced materials.

[41]  Yanlin Song,et al.  Fabrication of Transparent Multilayer Circuits by Inkjet Printing , 2016, Advanced materials.

[42]  C. Yan,et al.  A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites , 2016, Scientific Reports.

[43]  Feng Zhang,et al.  3D Printing of Graphene Aerogels. , 2016, Small.

[44]  Brett Paull,et al.  Recent developments in 3D printable composite materials , 2016 .

[45]  S. Bai,et al.  High-performance thermal interface materials consisting of vertically aligned graphene film and polymer , 2016 .

[46]  M. Terrones,et al.  Electrically functional 3D-architectured graphene/SiC composites , 2016 .

[47]  L. Fambri,et al.  Fused deposition modelling with ABS–graphene nanocomposites , 2016 .

[48]  Dichen Li,et al.  Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites , 2016 .

[49]  Elisabetta A. Matsumoto,et al.  Biomimetic 4D printing. , 2016, Nature materials.

[50]  Zhenhua Ni,et al.  Investigation of dodecane in three-dimensional porous graphene sponge by Raman mapping , 2016, Nanotechnology.

[51]  Lixin Wu,et al.  Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing , 2016 .

[52]  O. Kraft,et al.  Approaching theoretical strength in glassy carbon nanolattices. , 2016, Nature materials.

[53]  Martin Pumera,et al.  3D-printing technologies for electrochemical applications. , 2016, Chemical Society reviews.

[54]  J. Lewis,et al.  Printing soft matter in three dimensions , 2016, Nature.

[55]  Fang Qian,et al.  Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores. , 2016, Nano letters.

[56]  Wai Yee Yeong,et al.  Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: A review on processes, materials and designs , 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[57]  Douglas E. Smith,et al.  Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication , 2017 .

[58]  Manuele Margni,et al.  Evaluating Eco‐Efficiency of 3D Printing in the Aeronautic Industry , 2017 .

[59]  A. Bandyopadhyay,et al.  Additive manufacturing: scientific and technological challenges, market uptake and opportunities , 2017 .

[60]  F. Piller,et al.  Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030 , 2017 .

[61]  Joo-Yeon Yoo,et al.  Freeform micropatterning of living cells into cell culture medium using direct inkjet printing , 2017, Scientific Reports.

[62]  D. Lin,et al.  A review on additive manufacturing of polymer-fiber composites , 2017 .

[63]  Frederic Roger,et al.  Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling , 2017 .

[64]  Mohammad A. Saed,et al.  Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating , 2017, Science Advances.

[65]  F. Calignano,et al.  Study of graphene oxide-based 3D printable composites: Effect of the in situ reduction , 2017 .

[66]  Tianyu Liu,et al.  3D printed functional nanomaterials for electrochemical energy storage , 2017 .

[67]  Melik Dolen,et al.  The Role of Additive Manufacturing in the Era of Industry 4.0 , 2017 .

[68]  S. Bai,et al.  Dense graphene foam and hexagonal boron nitride filled PDMS composites with high thermal conductivity and breakdown strength , 2017 .

[69]  Jun Ni,et al.  A review of 4D printing , 2017 .

[70]  Chee Kai Chua,et al.  Fundamentals and applications of 3D printing for novel materials , 2017 .

[71]  H. Friedrich,et al.  3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling , 2017 .

[72]  P. Ajayan,et al.  Three-Dimensional Printed Graphene Foams. , 2017, ACS nano.

[73]  Yun Zheng,et al.  Recent advances in printable secondary batteries , 2017 .

[74]  Jianjun Guo,et al.  Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling , 2017 .

[75]  He Hui,et al.  High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing , 2017 .

[76]  Michael C. McAlpine,et al.  3D Printed Stretchable Tactile Sensors , 2017, Advanced materials.

[77]  Amanda S. Wu,et al.  3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties , 2017, Scientific Reports.

[78]  Subha Kumpaty,et al.  Continuous Liquid Interface Production of 3D Objects: An Unconventional Technology and its Challenges and Opportunities , 2017 .

[79]  S. Bai,et al.  Microstructure engineering of graphene towards highly thermal conductive composites , 2018, Composites Part A: Applied Science and Manufacturing.

[80]  J. Lewis,et al.  3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic Order , 2018, Advanced materials.

[81]  D. Golberg,et al.  Fabrication and application of BN nanoparticles, nanosheets and their nanohybrids. , 2018, Nanoscale.

[82]  S. Bai,et al.  Simultaneous enhancement on thermal and mechanical properties of polypropylene composites filled with graphite platelets and graphene sheets , 2018, Composites Part A: Applied Science and Manufacturing.

[83]  Xiaoyu Zheng,et al.  Additive manufacturing of complex micro-architected graphene aerogels , 2018 .

[84]  Y. L. Yap,et al.  Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite , 2018, Advanced Materials Technologies.

[85]  Chao Gao,et al.  Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices , 2018 .

[86]  Shawn A. Chester,et al.  Printing ferromagnetic domains for untethered fast-transforming soft materials , 2018, Nature.

[87]  Qiangqiang Zhang,et al.  Three-Dimensional Printing Hollow Polymer Template-Mediated Graphene Lattices with Tailorable Architectures and Multifunctional Properties. , 2018, ACS nano.

[88]  Sylvie Grugeon,et al.  Highly Loaded Graphite–Polylactic Acid Composite-Based Filaments for Lithium-Ion Battery Three-Dimensional Printing , 2018, Chemistry of Materials.

[89]  G. Jiang,et al.  3D printing of graphene-doped target for "matrix-free" laser desorption/ionization mass spectrometry. , 2018, Chemical communications.

[90]  Jian Lu,et al.  Origami and 4D printing of elastomer-derived ceramic structures , 2018, Science Advances.

[91]  K. Zhou,et al.  Electrical and thermal conductivities of MWCNT/polymer composites fabricated by selective laser sintering , 2018 .

[92]  J. R. Raney,et al.  Rotational 3D printing of damage-tolerant composites with programmable mechanics , 2018, Proceedings of the National Academy of Sciences.

[93]  R. Liang,et al.  Recent Advances on 3D Printing Technique for Thermal‐Related Applications , 2018 .

[94]  Youhua Xiao,et al.  Highly stretchable carbon aerogels , 2018, Nature Communications.

[95]  Qifa Zhou,et al.  Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures , 2018, Advanced materials.

[96]  A. Mohamed,et al.  Toward high production of graphene flakes – a review on recent developments in their synthesis methods and scalability , 2018 .

[97]  Peter Bøggild,et al.  The war on fake graphene , 2018, Nature.

[98]  P. Ajayan,et al.  Composites with carbon nanotubes and graphene: An outlook , 2018, Science.

[99]  André R. Studart,et al.  Three-dimensional printing of hierarchical liquid-crystal-polymer structures , 2018, Nature.

[100]  A. Jakus,et al.  Three-Dimensional Printing of Cytocompatible, Thermally Conductive Hexagonal Boron Nitride Nanocomposites. , 2018, Nano letters.

[101]  Mohd Adzir Mahdi,et al.  Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices , 2018, Scientific Reports.

[102]  Seeram Ramakrishna,et al.  Additive Manufacturing of Biomaterials − The Evolution of Rapid Prototyping , 2019, Advanced Engineering Materials.