A cost-benefit analysis of pre-sorting using a feller-buncher in underdeveloped short rotation poplar plantations

ABSTRACT Underdeveloped tree crops (⩽ 30 bone-dry tons ha−1) offer a main harvest of biomass-trees, which lack the size and the form for producing a log. However, about 1/3 of the available stems may yield at least one log, which could significantly increase the overall value of the harvest. Under those circumstances, it may make sense to sort log-trees from biomass-trees at an early stage, rather than having a harvester or a processor go through all of the treesonly to toss almost 70 out of 100 trees into the biomass pile. The Authors set up a controlled experiment to quantify the eventual benefit obtained by early pre-sorting, performed by the feller-buncher. Pre-sorting resulted in a 15% productivity loss for the feller-buncher, which was repaid by a 100% productivity increase for the processor. Considering the different hourly cost of the two machines, three Euros were saved for each additional Euro invested in pre-sorting. Pre-sorting made whole-tree harvesting (WTH) a significantly cheaper option than cut-to-length (CTL) , whereas the two systems would be almost equally expensive when no pre-sorting was applied. Pre-sorting would also facilitate multiple-tree delimbing, implemented through the introduction of a chainflail; that is likely to further reduce harvesting cost, returning financial viability to the harvesting of underdeveloped plantations.

[1]  N. Magagnotti,et al.  First trial of a prototype chainflail delimber for the European short rotation poplar plantations , 2022, European Journal of Forest Research.

[2]  N. Magagnotti,et al.  Manipulating grading strategy for the efficient harvesting of industrial poplar plantations , 2022, International Journal of Forest Engineering.

[3]  Dominik Roeser,et al.  Key Factors influencing Productivity of Whole Tree Ground-Based Felling equipment commonly used in the Pacific Northwest , 2022, Canadian Journal of Forest Research.

[4]  D. Krabel,et al.  Biomass Allocation and Root Characteristics of Early-Stage Poplars (Populus spp.) for Assessing Their Water-Deficit Response During SRC Establishment , 2021, BioEnergy Research.

[5]  H. Röhle,et al.  Comparison of the Initial Growth of Different Poplar Clones on Four Sites in Western Slovakia—Preliminary Results , 2021, BioEnergy Research.

[6]  K. Kärhä,et al.  Multi-tree cut-to-length harvesting of short-rotation poplar plantations , 2020, European Journal of Forest Research.

[7]  D. Landgraf,et al.  Biomass Yield of 37 Different SRC Poplar Varieties Grown on a Typical Site in North Eastern Germany , 2020 .

[8]  R. Zalesny,et al.  Allometric Relationships for Aboveground Woody Biomass Differ Among Hybrid Poplar Genomic Groups and Clones in the North-Central USA , 2019, BioEnergy Research.

[9]  Jan Světlík,et al.  Allometric relationship and biomass expansion factors (BEFs) for above- and below-ground biomass prediction and stem volume estimation for ash (Fraxinus excelsior L.) and oak (Quercus robur L.) , 2017, Trees.

[10]  Han-Sup Han,et al.  Processing and sorting forest residues: Cost, productivity and managerial impacts , 2016 .

[11]  J. Holmgren,et al.  Tree Stem Diameter Estimation from Mobile Laser Scanning Using Line-Wise Intensity-Based Clustering , 2016 .

[12]  Natascia Magagnotti,et al.  The role of work studies in forest engineering: status and perspectives , 2015 .

[13]  Jouni Pykäläinen,et al.  Using the ComBio decision support system to assess whether energy wood and/or pulpwood should be harvested in young forests , 2014 .

[14]  R. Ceulemans,et al.  Comparative study of biomass determinants of 12 poplar (Populus) genotypes in a high-density short-rotation culture , 2013 .

[15]  Natascia Magagnotti,et al.  A new guide for work studies in forestry , 2013 .

[16]  Raffaele Spinelli,et al.  Harvesting techniques for non-industrial biomass plantations , 2012 .

[17]  Paulo Torres Fenner,et al.  Efeito do tempo de experiência de operadores de Harvester no rendimento operacional , 2012 .

[18]  Wilhelm Claupein,et al.  Biomass production potential from Populus short rotation systems in Romania , 2012 .

[19]  Kalle Kärhä,et al.  Integrated harvesting of energy wood and pulpwood in first thinnings using the two-pile cutting method , 2011 .

[20]  Jörn Erler,et al.  The Human Influence on Productivity in Harvester Operations , 2011 .

[21]  K. Hartmann.  Entwicklung eines Ertragsschätzers für Kurzumtriebsbestände aus Pappel , 2010 .

[22]  Raffaele Spinelli,et al.  Analyzing and Estimating Delays in Harvester Operations , 2008 .

[23]  Anders Roos,et al.  Retreat from Salix - Swedish experience with energy crops in the 1990s , 2006 .

[24]  Jon D. Johnson,et al.  Hybrid Poplar in the Pacific Northwest: The Effects of Market-Driven Management , 2002, Journal of Forestry.

[25]  Raffaele Spinelli,et al.  Productivity and Utilization Benchmarks for Chain Flail Delimber-Debarkers-Chippers Used in Fast-Growing Plantations , 2019 .

[26]  T. Ranta,et al.  First-thinning harvesting alternatives for industrial or energy purposes based on regional Scots pine stand simulations in Finland , 2016 .

[27]  Birger Hjelm,et al.  Empirical Models for Estimating Volume and Biomass of Poplars on Farmland in Sweden , 2015 .

[28]  R. Ceulemans,et al.  Above- and below-ground biomass, surface and volume, and stored water in a mature Scots pine stand , 2014, European Journal of Forest Research.

[29]  Tomas Nordfjell,et al.  Effects of the number of assortments and log concentration on time consumption for forwarding , 2013 .

[30]  T. Palander,et al.  Excavator-based harvesters in wood cutting operations in Finland , 2007 .

[31]  Dominik Röser,et al.  The Effect of Single Grip Harvester's Log Bunching on Forwarder Efficiency , 2006 .

[32]  P. Heilman.  Planted forests: poplars , 2004, New Forests.

[33]  Ahmed Koubaa,et al.  Selection for Both Growth and Wood Properties in Hybrid Poplar Clones , 2003, Forest Science.

[34]  Raffaele Spinelli,et al.  Productivity and cost of CTL harvesting of Eucalyptus globulus stands using excavator-based harvesters , 2002 .

[35]  J. F. Fingras.  The cost of product sorting during harvesting , 1996 .

[36]  P. Meek,et al.  Preliminary evaluation of the ET 1 processor , 1995 .