论文信息 - Studies on Performance of Pin-Fin Heat Sink

Studies on Performance of Pin-Fin Heat Sink

The primary objective of the present study is to conduct fluid flow and heat transfer measurements on pin-fin arrays to investigate the flow and heat transfer characteristics. The material of the base plate and pin-fin are of duralumin (2024) used. An experimental setup fabricated with necessary instrumentation to measure pressure, flow and temperature. Air was the medium used in this study. Pin-fins arranged were in in-line and staggered manner. The results of the in-line configurations were also compared with the results of the staggered arrangements for pin-fins.

S. Balamurugan | R. Muthukumaran

[1] Sheng-Chung Tzeng,et al. Pressure drop and heat transfer of square pin-fin arrays in in-line and staggered arrangements , 2007 .

[2] Forrest E. Ames,et al. Turbulent Augmentation of Internal Convection Over Pins in Staggered Pin Fin Arrays , 2004 .

[3] M. Sivrioglu,et al. Parametric study of natural convection heat transfer from horizontal rectangular fin arrays , 2000 .

[4] Minking K. Chyu,et al. Convective Heat Transfer of Cubic Fin Arrays in a Narrow Channel , 1996 .

[5] S. D. Probert,et al. Thermal performance of a pin-fin assembly , 1995 .

[6] S. Probert,et al. Heat-transfer effectivenesses of shrouded, rectangular-fin arrays , 1993 .

[7] F. Incropera,et al. Fundamentals of heat and mass transfer, 2nd edition , 1990 .

[8] M. Chyu. Heat Transfer and Pressure Drop for Short Pin-Fin Arrays With Pin-Endwall Fillet , 1989 .

[9] J. Armstrong,et al. A Review of Staggered Array Pin Fin Heat Transfer for Turbine Cooling Applications , 1987 .

[10] G. J. Vanfossen,et al. Length to diameter ratio and row number effects in short pin fin heat transfer , 1984 .