Effect of injection velocity on the structure and mechanical properties of micro injection molded polycarbonate/poly(ethylene terephthalate) blends

[1]  Yajiang Huang,et al.  Role of dicumyl peroxide on the morphology and mechanical performance of polypropylene random copolymer in microinjection molding , 2018 .

[2]  Alex Elías-Zúñiga,et al.  Micro injection molding processing of UHMWPE using ultrasonic vibration energy , 2017 .

[3]  Chong Liu,et al.  Replication of large scale micro pillar array with different diameters by micro injection molding , 2017 .

[4]  Bingyan Jiang,et al.  Experimental study on the replication quality of micro–nano cross-shaped structure arrays in injection molding , 2017 .

[5]  S. M. Davachi,et al.  Simulation of mechanical behavior and optimization of simulated injection molding process for PLA based antibacterial composite and nanocomposite bone screws using central composite design. , 2017, Journal of the mechanical behavior of biomedical materials.

[6]  V. Altstädt,et al.  Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners , 2016, Materials.

[7]  A. Hrymak,et al.  Electrical and morphological properties of microinjection molded polystyrene/multiwalled carbon nanotubes nanocomposites , 2016 .

[8]  G. Lucchetta,et al.  Analysis of the influence of part thickness on the replication of micro-structured surfaces by injection molding , 2016 .

[9]  Shuaijiang Ma,et al.  Effect of mold temperature on the structures and mechanical properties of micro-injection molded polypropylene , 2015 .

[10]  G. Pharr,et al.  Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges , 2015 .

[11]  N. Zhang,et al.  Effects of gate design and cavity thickness on filling, morphology and mechanical properties of microinjection mouldings , 2015 .

[12]  Chuhong Zhang,et al.  Filling behavior, morphology evolution and crystallization behavior of microinjection molded poly(lactic acid)/hydroxyapatite nanocomposites , 2015 .

[13]  Torben Fischer,et al.  New plasticising process for increased precision and reduced residence times in injection moulding of micro parts , 2015 .

[14]  H. Anuar,et al.  Mechanical properties and failure modes of recycled polypropylene/microcrystalline cellulose composites , 2015 .

[15]  A. Takahara,et al.  Chain orientation in poly(glycolic acid)/halloysite nanotube hybrid electrospun fibers , 2015 .

[16]  N. Zhang,et al.  Flow Induced Crystallization of Poly(ether‐block‐amide) from the Microinjection Molding Process and its Effect on Mechanical Properties , 2014 .

[17]  B. Whiteside,et al.  Epitaxial growth and morphological characteristics of isotactic polypropylene/polyethylene blends: Scale effect and mold temperature , 2014 .

[18]  A. Yi,et al.  An affordable injection-molded precision hybrid glass–polymer achromatic lens , 2013 .

[19]  S. Chen,et al.  Rheological behavior of PS polymer melt under ultra high speed injection molding , 2012 .

[20]  M. Gilchrist,et al.  Characterization of thermo-rheological behavior of polymer melts during the micro injection moulding process , 2012 .

[21]  Huaping Wu,et al.  Characterization of local mechanical properties of laser-cladding H13–TiC composite coatings using nanoindentation and finite element analysis , 2012 .

[22]  Sung-Joo Choi,et al.  Multi-scale filling simulation of micro-injection molding process , 2011 .

[23]  S. Illescas,et al.  Effects of composition and transesterification catalysts on the physico-chemical and dynamic properties of PC/PET blends rich in PC , 2010 .

[24]  G. Peters,et al.  Structure-property relations in molded, nucleated isotactic polypropylene , 2009 .

[25]  Xuping Sun,et al.  Shear-Induced Interfacial Structure of Isotactic Polypropylene (iPP) in iPP/Fiber Composites , 2006 .

[26]  M. Rabello,et al.  The kinetics of isothermal cold crystallization and tensile properties of poly(ethylene terephthalate) , 2005 .

[27]  G. G. Peters,et al.  Structure, Deformation, and Failure of Flow-Oriented Semicrystalline Polymers , 2004 .

[28]  Y. Kong,et al.  Miscibility and crystallisation behaviour of poly(ethylene terephthalate)/polycarbonate blends , 2002 .

[29]  P. Gao,et al.  Flow induced chain alignment and disentanglement as the viscosity reduction mechanism within TLCP/HDPE blends , 2001 .

[30]  I. Ward,et al.  Solid phase processing of polymers , 2000 .

[31]  F. Pilati,et al.  PET/PC blends and copolymers by one-step extrusion: 1. Chemical structure and physical properties of 5050 blends , 1997 .

[32]  J. Jog.  Crystallization of Polyethyleneterephthalate , 1995 .

[33]  H. Saito,et al.  Time-resolved light scattering studies on the early stage of crystallization in poly(ethylene terephthalate) , 1993 .

[34]  S. K. Bahl,et al.  Vibrational analysis of polyethylene terephthalate and its deuterated derivatives , 1976 .