A Bioink Blend for Rotary 3D Bioprinting Tissue Engineered Small-Diameter Vascular Constructs.

3D bioprinted vascular constructs have gained increased interest due to their significant potential for creating customizable alternatives to autologous vessel grafts. In this study, we developed a new approach for biofabricating fibrin-based vascular constructs using a novel rotary 3D bioprinter developed in our lab. We formulated a new bioink by incorporating fibrinogen with gelatin to achieve a desired shear-thinning property for rotary bioprinting. The blending of heat-treated gelatin with fibrinogen turned unprintable fibrinogen into a printable biomaterial for vessel bioprinting by leveraging the favorable rheological properties of gelatin. We discovered that the heat-treatment of gelatin remarkably affects the rheological properties of a gelatin-fibrinogen blended bioink, which in turn influences the printability of the ink. Further characterizations revealed that not only concentration of the gelatin but the heat treatment also affects cell viability during printing. Notably, the density of cells included in the bioinks also influenced printability and tissue volumetric changes of the printed vessel constructs during cultures. We observed increased collagen deposition and construct mechanical strength during two months of the cultures. The burst pressure of the vessel constructs reached 1,110 mmHg, which is about 52% of the value of the human saphenous vein. An analysis of the tensile mechanical properties of the printed vessel constructs unveiled an increase in both the circumferential and axial elastic moduli during cultures. This study highlights important considerations for bioink formulation when bioprinting vessel constructs. Statement of Significance There has been an increased demand for small-diameter tissue-engineered vascular grafts. Vascular 3D bioprinting holds the potential to create equivalent vascular grafts but with the ability to tailor them to meet patient's needs. Here, we presented a new and innovative 3D rotary bioprinter and a new bioink formulation for printing vascular constructs using fibrinogen, a favorable biomaterial for vascular tissue engineering. The bioink was formulated by blending fibrinogen with a more printable biomaterial, gelatin. The systematic characterization of the effects of heat treatment and gelatin concentration as well as bioink cell concentration on the printability of the bioink offers new insight into the development of printable biomaterials for tissue biofabrication.

[1]  Matthew T. Lahti,et al.  Blood Outgrowth Endothelial Cells Alter Remodeling of Completely Biological Engineered Grafts Implanted into the Sheep Femoral Artery , 2014, Journal of Cardiovascular Translational Research.

[2]  Elliot L Chaikof,et al.  Acellular vascular grafts generated from collagen and elastin analogs. , 2013, Acta biomaterialia.

[3]  S. Irvine,et al.  Bioprinted gelatin hydrogel platform promotes smooth muscle cell contractile phenotype maintenance , 2018, Biomedical Microdevices.

[4]  Lih-Sheng Turng,et al.  Approaches to Fabricating Multiple-Layered Vascular Scaffolds Using Hybrid Electrospinning and Thermally Induced Phase Separation Methods , 2016 .

[5]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[6]  Antonio Colombo,et al.  Percutaneous coronary intervention versus coronary-artery bypass grafting for severe coronary artery disease. , 2009, The New England journal of medicine.

[7]  H. B. Zhang,et al.  Tyrosinase-doped bioink for 3D bioprinting of living skin constructs , 2018, Biomedical materials.

[8]  A. Krasznai,et al.  Vascular replacement using a layered elastin-collagen vascular graft in a porcine model: one week patency versus one month occlusion , 2015, Organogenesis.

[9]  Huixing Zhou,et al.  3D Printing of Artificial Blood Vessel: Study on Multi-Parameter Optimization Design for Vascular Molding Effect in Alginate and Gelatin , 2017, Micromachines.

[10]  Huixing Zhou,et al.  Multinozzle Multichannel Temperature Deposition System for Construction of a Blood Vessel , 2018, SLAS technology.

[11]  Hilton C. Deeth,et al.  Rheology, texture and microstructure of gelatin gels with and without milk proteins , 2014 .

[12]  Debby Gawlitta,et al.  Properties of engineered vascular constructs made from collagen, fibrin, and collagen-fibrin mixtures. , 2004, Biomaterials.

[13]  Jianzhong Fu,et al.  3D Bioprinting of Low-Concentration Cell-Laden Gelatin Methacrylate (GelMA) Bioinks with a Two-Step Cross-linking Strategy. , 2018, ACS applied materials & interfaces.

[14]  R. Rossi,et al.  A compliant and biomimetic three-layered vascular graft for small blood vessels , 2017, Biofabrication.

[15]  L A Geddes,et al.  Compliance, elastic modulus, and burst pressure of small-intestine submucosa (SIS), small-diameter vascular grafts. , 1999, Journal of biomedical materials research.

[16]  Dong-Woo Cho,et al.  A 3D cell printed muscle construct with tissue-derived bioink for the treatment of volumetric muscle loss. , 2019, Biomaterials.

[17]  S. Andreadis,et al.  Fibrin-based tissue-engineered blood vessels: differential effects of biomaterial and culture parameters on mechanical strength and vascular reactivity. , 2005, Tissue engineering.

[18]  L. Turng,et al.  Manipulating the structure and mechanical properties of thermoplastic polyurethane/polycaprolactone hybrid small diameter vascular scaffolds fabricated via electrospinning using an assembled rotating collector. , 2018, Journal of the mechanical behavior of biomedical materials.

[19]  A. Hayashi,et al.  Gelation of gelatin solution. , 1983 .

[20]  Ji-Seok Han,et al.  A potential dermal substitute using decellularized dermis extracellular matrix derived bio-ink , 2019, Artificial cells, nanomedicine, and biotechnology.

[21]  Min Jae Song,et al.  Fully Three-Dimensional Bioprinted Skin Equivalent Constructs with Validated Morphology and Barrier Function , 2019, Tissue engineering. Part C, Methods.

[22]  W Flameng,et al.  Improved endothelialization and reduced thrombosis by coating a synthetic vascular graft with fibronectin and stem cell homing factor SDF-1α. , 2012, Acta biomaterialia.

[23]  F A Auger,et al.  In vitro construction of a human blood vessel from cultured vascular cells: a morphologic study. , 1993, Journal of vascular surgery.

[24]  Hilton C. Deeth,et al.  Effect of addition of gelatin on the rheological and microstructural properties of acid milk protein gels , 2015 .

[25]  Ritu Raman,et al.  Three-dimensionally printed biological machines powered by skeletal muscle , 2014, Proceedings of the National Academy of Sciences.

[26]  M. Schliwa,et al.  Rheology , 2008, Current Biology.

[27]  S. Benjakul,et al.  Characteristics and gel properties of gelatin from skin of seabass (Lates calcarifer) as influenced by extraction conditions. , 2014, Food chemistry.

[28]  Diego Mantovani,et al.  Tailoring Mechanical Properties of Collagen-Based Scaffolds for Vascular Tissue Engineering: The Effects of pH, Temperature and Ionic Strength on Gelation , 2010 .

[29]  Mark A. Skylar-Scott,et al.  Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.

[30]  Robert M Nerem,et al.  Cyclic strain improves strength and function of a collagen-based tissue-engineered vascular media. , 2010, Tissue engineering. Part A.

[31]  J. Jansen,et al.  Controlled fabrication of triple layered and molecularly defined collagen/elastin vascular grafts resembling the native blood vessel. , 2010, Acta biomaterialia.

[32]  Antonio Colombo,et al.  Coronary artery bypass graft surgery versus percutaneous coronary intervention in patients with three-vessel disease and left main coronary disease: 5-year follow-up of the randomised, clinical SYNTAX trial , 2013, The Lancet.

[33]  Kimberly A. Homan,et al.  Bioprinting of 3D Convoluted Renal Proximal Tubules on Perfusable Chips , 2016, Scientific Reports.

[34]  Robert T Tranquillo,et al.  Cyclic distension of fibrin-based tissue constructs: Evidence of adaptation during growth of engineered connective tissue , 2008, Proceedings of the National Academy of Sciences.

[35]  L. Gordon.  Compliance , 2014, Canadian Medical Association Journal.

[36]  P. Nair,et al.  Tissue engineered vascular grafts--preclinical aspects. , 2013, International journal of cardiology.

[37]  W. Yeong,et al.  Proof-of-concept: 3D bioprinting of pigmented human skin constructs , 2018, Biofabrication.

[38]  T. Boland,et al.  Human microvasculature fabrication using thermal inkjet printing technology. , 2009, Biomaterials.

[39]  Sheila MacNeil,et al.  The Tissue-Engineered Vascular Graft—Past, Present, and Future , 2015, Tissue engineering. Part B, Reviews.

[40]  S. Andreadis,et al.  Composite Fibrin Scaffolds Increase Mechanical Strength and Preserve Contractility of Tissue Engineered Blood Vessels , 2008, Pharmaceutical Research.

[41]  Pankaj Karande,et al.  Design and fabrication of human skin by three-dimensional bioprinting. , 2014, Tissue engineering. Part C, Methods.

[42]  Ursula Graf-Hausner,et al.  A Novel Microplate 3D Bioprinting Platform for the Engineering of Muscle and Tendon Tissues , 2018, SLAS technology.

[43]  N. L'Heureux,et al.  Human tissue-engineered blood vessels for adult arterial revascularization , 2007, Nature Medicine.

[44]  L. Lourenço,et al.  Optimization and characterization of gelatin from kumakuma (Brachyplatystoma filamentosum) skin , 2017 .

[45]  Naveen Nagiah,et al.  Coaxially-structured fibres with tailored material properties for vascular graft implant. , 2019, Materials science & engineering. C, Materials for biological applications.

[46]  J. Jukema,et al.  Vein graft failure: from pathophysiology to clinical outcomes , 2016, Nature Reviews Cardiology.

[47]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[48]  M. Djabourov,et al.  Molecular Weight Influence on Gelatin Gels: Structure, Enthalpy and Rheology , 2007 .

[49]  Ralph Müller,et al.  Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting. , 2014, Acta biomaterialia.

[50]  Lucie Germain,et al.  Human fibroblast-derived ECM as a scaffold for vascular tissue engineering. , 2012, Biomaterials.

[51]  Lawrence J Bonassar,et al.  Correlating rheological properties and printability of collagen bioinks: the effects of riboflavin photocrosslinking and pH , 2017, Biofabrication.

[52]  R T Tranquillo,et al.  A fibrin-based arterial media equivalent. , 2003, Journal of biomedical materials research. Part A.

[53]  Y. Zhang,et al.  Comparison of rheological behaviors and nanostructure of bighead carp scales gelatin modified by different modification methods , 2017, Journal of Food Science and Technology.

[54]  X. Mo,et al.  Macroporous nanofibrous vascular scaffold with improved biodegradability and smooth muscle cells infiltration prepared by dual phase separation technique , 2018, International journal of nanomedicine.

[55]  Andreas Kurtz,et al.  Generation of a 3D Liver Model Comprising Human Extracellular Matrix in an Alginate/Gelatin-Based Bioink by Extrusion Bioprinting for Infection and Transduction Studies , 2018, International journal of molecular sciences.

[56]  Alfredo E. Rodríguez,et al.  Understanding the Outcome of Randomized Trials with Drug-Eluting Stents and Coronary Artery Bypass Graft in Patients with Multivessel Disease: A Review of a 25-Year Journey , 2016, Clinical Medicine Insights. Cardiology.

[57]  Athanassios Sambanis,et al.  Incorporation of intact elastin scaffolds in tissue-engineered collagen-based vascular grafts. , 2004, Tissue engineering.

[58]  Robert T Tranquillo,et al.  Elastic fiber production in cardiovascular tissue-equivalents. , 2003, Matrix biology : journal of the International Society for Matrix Biology.

[59]  R T Tranquillo,et al.  Fibrin as an alternative biopolymer to type-I collagen for the fabrication of a media equivalent. , 2002, Journal of biomedical materials research.

[60]  A. Shamloo,et al.  Bilayered heparinized vascular graft fabricated by combining electrospinning and freeze drying methods. , 2019, Materials science & engineering. C, Materials for biological applications.

[61]  F A Auger,et al.  A completely biological tissue‐engineered human blood vessel , 1998, FASEB journal : official publication of the Federation of American Societies for Experimental Biology.

[62]  C. Drake,et al.  Self-assembly of prevascular tissues from endothelial and fibroblast cells under scaffold-free, nonadherent conditions. , 2015, Tissue engineering. Part A.

[63]  Kristen T Morin,et al.  Aligned human microvessels formed in 3D fibrin gel by constraint of gel contraction. , 2013, Microvascular research.

[64]  James A. Russell,et al.  Engineering of fibrin-based functional and implantable small-diameter blood vessels. , 2005 .

[65]  Kristen T Morin,et al.  Engineered microvessels with strong alignment and high lumen density via cell-induced fibrin gel compaction and interstitial flow. , 2013, Tissue engineering. Part A.

[66]  Jianzhong Fu,et al.  3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels. , 2017, ACS biomaterials science & engineering.

[67]  R. Lauster,et al.  Bioprinting Perfusion-Enabled Liver Equivalents for Advanced Organ-on-a-Chip Applications , 2018, Genes.

[68]  A. Hardikar,et al.  Human Blood Vessel–Derived Endothelial Progenitors for Endothelialization of Small Diameter Vascular Prosthesis , 2009, PloS one.

[69]  Huaping Tan,et al.  Alginate-Based Biomaterials for Regenerative Medicine Applications , 2013, Materials.

[70]  Robert T Tranquillo,et al.  Implantable arterial grafts from human fibroblasts and fibrin using a multi-graft pulsed flow-stretch bioreactor with noninvasive strength monitoring. , 2011, Biomaterials.

[71]  Todd N. McAllister,et al.  The Evolution of Vascular Tissue Engineering and Current State of the Art , 2011, Cells Tissues Organs.

[72]  O. Alfieri,et al.  Comparison of percutaneous coronary intervention (with drug-eluting stents) versus coronary artery bypass grafting in women with severe narrowing of the left main coronary artery (from the Women-Drug-Eluting stent for LefT main coronary Artery disease Registry). , 2014, The American journal of cardiology.

[73]  Robert T Tranquillo,et al.  Implantation of completely biological engineered grafts following decellularization into the sheep femoral artery. , 2014, Tissue engineering. Part A.

[74]  Sarah Grace Dennis,et al.  Vascular Tissue Engineering Using Scaffold-Free Prevascular Endothelial–Fibroblast Constructs , 2019, BioResearch open access.

[75]  Anthony Atala,et al.  A Photo‐Crosslinkable Kidney ECM‐Derived Bioink Accelerates Renal Tissue Formation , 2019, Advanced healthcare materials.