Influence of water–air ratio on the heat transfer and creep life of a high pressure gas turbine blade

Abstract An analytical model to investigate the influence of Water–Air Ratio (WAR) on turbine blade heat transfer and cooling processes (and thus the blade creep life) of industrial gas turbines is presented. The effects of WAR are emphasised for the modelling of the gas properties and the subsequent heat transfer process. The approach considers convective/film cooling and includes the influence of a thermal barrier coating. In addition, the approach is based on the thermodynamic outputs of a gas turbine performance simulation, heat transfer model, as well as a method that accounts for the changes in the properties of moist air as a function of WAR. For a given off-design point, the variation of WAR (0.0–0.10) was investigated using the heat transfer model. Results showed that with increasing WAR the blade inlet coolant temperature reduced along the blade span. The blade metal temperature at each section was reduced as WAR increased, which in turn increased the blade creep life. The increase in WAR increased the specific heat of the coolant and increased the heat transfer capacity of the coolant air flow. The model can be implemented by using the thermodynamic cycle of the engine, without knowing the turbine cooling details in the conceptual design stage. Also, this generic method assists the end user to understand the effect of operating conditions and design parameter on the creep life of a high pressure turbine blade.

[1]  M. O. Dedekind,et al.  Implementation of creep-fatigue model into finite element code to assess cooled turbine blade , 1994 .

[3]  J. Young,et al.  Modeling the Air-Cooled Gas Turbine: Part 1—General Thermodynamics , 2002 .

[4]  K. Mathioudakis,et al.  Uncertainty Reduction in Gas Turbine Performance Diagnostics by Accounting for Humidity Effects , 2001 .

[5]  J. H. Horlock,et al.  Turbine Blade Cooling: The Blade Temperature Distribution , 2006 .

[6]  Tiedo Tinga,et al.  Analysis of Combined Convective and Film Cooling on an Existing Turbine Blade , 2001 .

[7]  Geoffrey T. Parks,et al.  Blade cooling optimisation in humid-air and steam-injected gas turbines , 2009 .

[8]  Holger Venzke,et al.  Interpolation Correlations for Fluid Properties of Humid Air in the Temperature Range 100 °C to 200 °C , 1997 .

[9]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[10]  D. R. Richards,et al.  Forced convection heat transfer to air/water vapor mixtures , 1984 .

[11]  Henry Cohen,et al.  Gas turbine theory , 1973 .

[12]  J. B. Young,et al.  The effect of turbine blade cooling on the cycle efficiency of gas turbine power cycles , 2005 .

[13]  Frank E. Jones.  Techniques and Topics in FLOW MEASUREMENT , 1995 .

[14]  Klaus Brun,et al.  Aerodynamic Instability and Life-Limiting Effects of Inlet and Interstage Water Injection Into Gas Turbines , 2006 .

[15]  R. Dimelfi.  Comments on: “Understanding the Larson-Miller parameter”, by F. T. Furillo, S. Purushothaman and J. K. Tien (1) , 1978 .

[16]  Genick Bar-Meir,et al.  Basics of Fluid Mechanics , 2009 .

[17]  J. H. Horlock.  Heat exchanger performance with water injection (with relevance to evaporative gas turbine (EGT) cycles) , 1998 .

[18]  P. Tsilingiris.  Thermophysical and transport properties of humid air at temperature range between 0 and 100 °C , 2008 .

[19]  Sanjay,et al.  Comparative performance analysis of cogeneration gas turbine cycle for different blade cooling means , 2009 .

[20]  J. H. Horlock,et al.  Limitations on Gas Turbine Performance Imposed by Large Turbine Cooling Flows , 2000 .

[21]  M. El-Masri.  On Thermodynamics of Gas-Turbine Cycles: Part 2—A Model for Expansion in Cooled Turbines , 1986 .

[22]  Aristide F. Massardo,et al.  Convective Blade Cooling Modelling for the Analysis of Innovative Gas Turbine Cycles , 2001 .

[23]  Paul Fletcher,et al.  Gas Turbine Performance , 1998 .

[24]  Yousef S.H. Najjar,et al.  Heat transfer analysis for a multistage gas turbine using different blade-cooling schemes , 2004 .

[25]  A. J. Meacock,et al.  The Effect of Water Injection on Multispool Gas Turbine Behavior , 2006 .

[26]  Andrés Amell,et al.  Influence of the relative humidity on the air cooling thermal load in gas turbine power plant , 2002 .

[27]  J. B. Young,et al.  Modeling the Air-Cooled Gas Turbine: Part 2—Coolant Flows and Losses , 2002 .

[28]  Y. Çengel.  Heat and Mass Transfer: Fundamentals and Applications , 2000 .

[29]  F. Durst,et al.  Influence of humidity on the convective heat transfer from small cylinders , 1998 .

[30]  M. J. Holland,et al.  Rotor blade cooling in high pressure turbines , 1980 .

[31]  Ennio Macchi,et al.  A Thermodynamic Analysis of Different Options to Break 60% Electric Efficiency in Combined Cycle Power Plants , 2002 .

[32]  Srinath V. Ekkad,et al.  Gas Turbine Heat Transfer and Cooling Technology , 2012 .

[33]  W. Rohsenow,et al.  Handbook of Heat Transfer Fundamentals , 1985 .

[34]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[35]  F. W. Murray,et al.  On the Computation of Saturation Vapor Pressure , 1967 .

[36]  Yi-Guang Li,et al.  Impact of Operating Conditions and Design Parameters on Gas Turbine Hot Section Creep Life , 2010 .

[37]  Aristide F. Massardo,et al.  Analytical Blade Row Cooling Model for Innovative Gas Turbine Cycle Evaluations Supported by Semi-Empirical Air-Cooled Blade Data , 2004 .

[38]  S. Purushothaman,et al.  Understanding the Larson-Miller parameter , 1977 .

[39]  G. J. Vanfossen.  Feasibility of water injection into the turbine coolant to permit gas turbine contingency power for helicopter application , 1983 .

[40]  B. Lakshminarayana.  Fluid dynamics and heat transfer of turbomachinery , 1995 .

[41]  A. London,et al.  Compact heat exchangers , 1960 .

[42]  Tiedo Tinga,et al.  Integrated Lifing Analysis Tool for Gas Turbine Components , 2000 .

[43]  Edward A. Mason,et al.  Approximate Formula for the Thermal Conductivity of Gas Mixtures , 1958 .

[44]  G. A. Halls,et al.  Air Cooling of Turbine Blades and Vanes , 1967 .

[45]  J. Kestin,et al.  The viscosity of dry and humid air , 1964 .

[46]  J. H. Horlock,et al.  A New Method to Calculate the Coolant Requirements of a High-Temperature Gas Turbine Blade , 2005 .