Optimal design work for high-frequency quartz resonators

My research focused on improving the performance of AT-cut high-frequency quartz resonators, which have been used in a wide range of applications including frequency generators, frequency control of telecommunication systems. New research findings about optimal design of AT-cut high-frequency quartz resonators fabricated by newly developed etching process were presented through improving energy trapping and reducing spurious vibration couplings. The simulation and experimental verification were carried out, and the effectiveness of the optimal design was validated. The main optimal design works include five cases.

[1]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[2]  K. Nakamura,et al.  Trapped-energy piezoelectric resonators with elliptical ring electrodes , 1990, 44th Annual Symposium on Frequency Control.

[3]  M. Onoe.  Effect of energy trapping on performance of QCM , 2005, Proceedings of the 2005 IEEE International Frequency Control Symposium and Exposition, 2005..

[4]  Hsin Hui Chen,et al.  Optimization of Electrode Structure for a High-Frequency AT-cut Quartz Resonator Using FEM , 2012 .

[5]  W. J. Spencer,et al.  Thickness‐Shear Vibration in Rectangular AT‐Cut Quartz Plates with Partial Electrodes , 1968 .

[6]  Kun Wang,et al.  VHF free-free beam high-Q micromechanical resonators , 2000 .

[7]  Jiashi Yang,et al.  Optimal electrode shape and size of plate thickness-shear mode piezoelectric resonators , 2008, 2008 IEEE Ultrasonics Symposium.

[8]  W. Marsden.  I and J , 2012 .

[9]  H. Tiersten,et al.  Forced Thickness‐Shear Vibrations of Discontinuously Plated Piezoelectric Plates , 1968 .

[10]  T. Ueda,et al.  Dimension optimization for a miniature high-frequency quartz resonatore , 2013, 2013 IEEE SENSORS.

[11]  Raymond D. Mindlin,et al.  Thickness-shear and flexural vibrations of partially plated, crystal plates , 1966 .

[12]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[13]  H. Shimizu,et al.  Analyses of Two-Dimensional Energy Trapping in Piezoelectric Plates with Rectangular Electrodes , 1976 .

[14]  M. Pandey,et al.  Reducing Anchor Loss in MEMS Resonators Using Mesa Isolation , 2009, Journal of Microelectromechanical Systems.

[15]  Meng Zhao,et al.  Size optimization for high frequency quartz resonator using finite element vibration analysis , 2011, 2011 IEEE SENSORS Proceedings.

[16]  T. Ueda,et al.  Dimension optimization of supporting portion for a high-frequency quartz resonator , 2013 .

[17]  Ji Wang,et al.  The determination of the optimal length of crystal blanks in quartz crystal resonators , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[18]  H. Sun,et al.  Dynamic analysis of AT-cut quartz resonators with ANSYS , 2004, Proceedings of IEEE Sensors, 2004..

[19]  Siak Piang Lim,et al.  Finite element analysis of interference for the laterally coupled quartz crystal microbalances , 2005 .

[20]  J. T. Stewart,et al.  Thickness-shear mode shapes and mass-frequency influence surface of a circular and electroded AT-cut quartz resonator , 1991, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.