Design and Performance of Ropes for Climbing and Sailing

Abstract Ropes are an important part of the equipment used by climbers, mountaineers, and sailors. On first inspection, most modern polymer ropes appear similar, and it might be assumed that their designs, construction, and properties are governed by the same requirements. In reality, the properties required of climbing ropes are dominated by the requirement that they effectively absorb and dissipate the energy of the falling climber, in a manner that it does not transmit more than a critical amount of force to his body. This requirement is met by the use of ropes with relatively low longitudinal stiffness. In contrast, most sailing ropes require high stiffness values to maximize their effectiveness and enable sailors to control sails and equipment precisely. These conflicting requirements led to the use of different classes of materials and different construction methods for the two sports. This paper reviews in detail the use of ropes, the properties required, manufacturing techniques and materials utilized, and the effect of service conditions on the performance of ropes. A survey of research that has been carried out in the field reveals what progress has been made in the development of these essential components and identifies where further work may yield benefits in the future.

[1]  Luigi Nicolais,et al.  Water transport in a polyketone terpolymer , 1995 .

[2]  C. M. Leech,et al.  The prediction of cyclic load behaviour and modulus modulation for polyester and other large synthetic fiber ropes , 2003, Oceans 2003. Celebrating the Past ... Teaming Toward the Future (IEEE Cat. No.03CH37492).

[3]  C. Bert,et al.  Theory of wire rope , 1990 .

[4]  J K Leavitt,et al.  Learning the ropes. , 1993, Imprint.

[5]  C. M. Leech,et al.  The modelling of friction in polymer fibre ropes , 2002 .

[6]  Gigi Signoretti.  The influence of water, ice and sunlight on the dynamic performance of mountaineering ropes , 2002 .

[7]  Giuseppe Mensitieri,et al.  Gas and water vapour transport in a polyketone terpolymer , 1995 .

[8]  K. A. Milne,et al.  An assessment of the strength of knots and splices used as eye terminations in a sailing environment , 2006 .

[9]  Giuseppe Ragosta,et al.  A novel spectroscopic approach to investigate transport processes in polymers: the case of water–epoxy system , 2001 .

[10]  Andrea Manes.  Analysis of a textile rope with analytical models , 2002 .

[11]  S. J. Banfield,et al.  Modelling Tension and Torque Properties of Fibre Ropes and splices C M Leech, Reader in Mechanical Engineering, UMIST, PO Box 88, Manchester, M60 1QD, ENGLAND , 1993 .

[12]  S. Leigh Phoenix,et al.  Statistical Theory for the Strength of Twisted Fiber Bundles with Applications to Yarns and Cables , 1979 .

[13]  Allen Fyffe,et al.  Handbook of Climbing , 1991 .

[14]  Robert Altenloh.  From a Novel , 1953 .

[15]  Michael Reynolds.  Learning the ropes , 1982 .

[16]  C. M. Leech,et al.  Use of inhomogeneous finite elements for the prediction of stress in rope terminations , 1985 .

[17]  R. A. Smith.  The development of equipment to reduce risk in rock climbing , 1998 .

[18]  J. R. Blackford.  11 – Materials in mountaineering , 2003 .

[19]  Martyn J Pavier.  Experimental and theoretical simulations of climbing falls , 1999 .

[20]  Ning Pan,et al.  Physical properties of twisted structures. II. Industrial yarns, cords, and ropes , 2002 .

[21]  Melvin I. Kohan,et al.  Nylon plastics handbook , 1995 .