Blind estimation of general tip shape in AFM imaging.

The use of flared tip and bi-directional servo control in some recent atomic force microscopes (AFM) has made it possible for these advanced AFMs to image structures of general shapes with undercut surfaces. AFM images are distorted representations of sample surfaces due to the dilation produced by the finite size of the tip. It is necessary to obtain the tip shape in order to correct such tip distortion. This paper presents a noise-tolerant approach that can for the first time estimate a general 3-dimensional (3D) tip shape from its scanned image in such AFMs. It extends an existing blind tip estimation method. With the samples, images, and tips described by dexels, a representation that can describe general 3D shapes, the new approach can estimate general tip shapes, including reentrant features such as undercut lines.

[1]  H. Kumar Wickramasinghe,et al.  Method for imaging sidewalls by atomic force microscopy , 1994 .

[2]  J. Villarrubia.  Algorithms for Scanned Probe Microscope Image Simulation, Surface Reconstruction, and Tip Estimation , 1997, Journal of research of the National Institute of Standards and Technology.

[3]  Rohit Jain,et al.  Critical dimension AFM tip characterization and image reconstruction applied to the 45-nm node , 2006, SPIE Advanced Lithography.

[4]  Edward R. Dougherty,et al.  Hands-on Morphological Image Processing , 2003 .

[5]  Ronald G. Dixson,et al.  Image simulation and surface reconstruction of undercut features in atomic force microscopy , 2007, SPIE Advanced Lithography.

[6]  J. Villarrubia.  Morphological estimation of tip geometry for scanned probe microscopy , 1994 .

[7]  Bharat Bhushan,et al.  Applied scanning probe methods , 2006 .

[8]  Gregory A. Dahlen,et al.  TEM validation of CD AFM image reconstruction: part II , 2008, SPIE Advanced Lithography.

[9]  Ndubuisi G. Orji,et al.  Progress on implementation of a reference measurement system based on a critical-dimension atomic force microscope , 2007 .

[10]  Xiaoping Qian,et al.  General three-dimensional image simulation and surface reconstruction in scanning probe microscopy using a dexel representation. , 2007, Ultramicroscopy.

[11]  Richard A. Allen,et al.  Traceable calibration of critical-dimension atomic force microscope linewidth measurements with nanometer uncertainty , 2005 .

[12]  Kazimierz Kuratowski,et al.  Introduction to Set Theory and Topology , 1964 .

[13]  Michael T. Postek,et al.  Experimental test of blind tip reconstruction for scanning probe microscopy , 2000 .

[14]  Noël Bonnet,et al.  Blind restoration method of scanning tunneling and atomic force microscopy images , 1996 .

[15]  Krishnan Suresh,et al.  A computing strategy for applications involving offsets, sweeps, and Minkowski operations , 1999, Comput. Aided Des..

[16]  Andrew G. Glen,et al.  APPL , 2001 .

[17]  Jean Serra,et al.  Image Analysis and Mathematical Morphology , 1983 .

[18]  Gregory A. Dahlen,et al.  TEM validation of CD AFM image reconstruction , 2007, SPIE Advanced Lithography.

[19]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[20]  Kevin M. Shakesheff,et al.  Blind reconstruction of scanning probe image data , 1996 .

[21]  John S. Villarrubia,et al.  Tip Characterization for Dimensional Nanometrology , 2004 .

[22]  Ming C. Leu,et al.  A Novel Contour Generation Algorithm for Surface Reconstruction From Dexel Data , 2007, J. Comput. Inf. Sci. Eng..

[23]  Gregory A. Dahlen,et al.  Tip characterization and surface reconstruction of complex structures with critical dimension atomic force microscopy , 2005 .

[24]  Diana Nyyssonen,et al.  Two‐dimensional atomic force microprobe trench metrology system , 1991 .

[25]  Gregory A. Dahlen,et al.  Advanced CD-AFM probe tip shape characterization for metrology accuracy and throughput , 2007, SPIE Advanced Lithography.

[26]  W. Godwin.  Article in Press , 2000 .