Objective Optimization for Multilevel Neutral-Point-Clamped Converters with Zero-Sequence Signal Control

When the converter level count gets higher, the space-vector pulse-width modulation (PWM) will suffer from the calculation burden for synthesising the voltage vectors and the redundant vector selection, which can be overcome by using the carrier-based PWM, as long as the carrier signal and modulation signal can be properly selected. This study proposes a new carrier-based PWM method to achieve some important control objectives in multilevel converters by adding the optimised zero-sequence signal to the reference voltage. The control objective as well as the control method for balancing the DC-link neutral point (NP) potential is presented. Meanwhile, the relationship between the NP potential and zero-sequence voltage is comprehensively analysed and an algorithm for injecting the optimised zero-sequence signal is derived. This study also investigates how to use the zero-sequence voltage to achieve the ‘two-phase’ mode operation for reducing the converter switching losses. A common mode (CM) voltage mitigation method is then proposed which effectively mitigates the CM voltage within 1/6 of the DC-link voltage. Furthermore, this study gives a simple method to directly map the reference voltage to the converter switches by using the concept of voltage level. The experimental results with a scaled 1 kW system validate the proposed NP potential control method and CM voltage mitigation method.

[1]  D. G. Holmes,et al.  Reduced PWM harmonic distortion for multilevel inverters operating over a wide modulation range , 2006, IEEE Transactions on Power Electronics.

[2]  Thomas A. Lipo,et al.  Improvements in EMC performance of inverter-fed motor drives , 1995 .

[3]  Fei Wang,et al.  Motor shaft voltages and bearing currents and their reduction in multi-level medium voltage PWM voltage source inverter drive applications , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[4]  V. Blasko,et al.  Analysis of a hybrid PWM based on modified space vector and triangle comparison methods , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[5]  L.M. Tolbert,et al.  Novel multilevel inverter carrier-based PWM methods , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[6]  F. Wang.  Multilevel PWM VSIs , 2004, IEEE Industry Applications Magazine.

[7]  G. Sciutto,et al.  A new multilevel PWM method: a theoretical analysis , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[8]  Dushan Boroyevich,et al.  A comprehensive study of neutral-point voltage balancing problem in three-level neutral-point-clamped voltage source PWM inverters , 2000 .

[9]  R. Naderi,et al.  Phase-Shifted Carrier PWM Technique for General Cascaded Inverters , 2008, IEEE Transactions on Power Electronics.

[10]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[11]  Seung-Ki Sul,et al.  Unified voltage modulation technique for real time three-phase power conversion , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[12]  Fei Wang,et al.  Sine-triangle vs. space vector modulation for three-level PWM voltage source inverters , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[13]  J. Erdman,et al.  Effect of PWM inverters on AC motor bearing currents and shaft voltages , 1996 .

[14]  A. von Jouanne,et al.  Application issues for PWM adjustable speed AC motor drives , 1996 .

[15]  Dushan Boroyevich,et al.  A fast space vector modulation algorithm for multilevel three-phase converters , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[16]  Chang Ho Choi,et al.  A new simplified space-vector PWM method for three-level inverters , 2001 .

[17]  A. von Jouanne,et al.  Multilevel inverter modulation schemes to eliminate common-mode voltages , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[18]  Alfio Consoli,et al.  Reduction of common mode currents in PWM inverter motor drives , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[19]  J. K. Steinke,et al.  Switching frequency optimal PWM control of a three-level inverter , 1992 .

[20]  Holmes,et al.  Pulse width modulation for power converters , 2003 .

[21]  D. G. Holmes,et al.  Optimized space vector switching sequences for multilevel inverters , 2003 .

[22]  D. G. Holmes,et al.  Optimal pulse-width modulation for three-level inverters , 2005, IEEE Transactions on Power Electronics.

[23]  Seung-Ki Sul,et al.  Common mode voltage reduction method modifying the distribution of zero voltage vector in PWM converter/inverter system , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[24]  Danwei Wang,et al.  Relationship between space-vector modulation and three-phase carrier-based PWM: a comprehensive analysis [three-phase inverters] , 2002, IEEE Trans. Ind. Electron..