PEM fuel cell electrodes

[1]  Won-Yong Lee,et al.  Effect of pore structure of catalyst layer in a PEMFC on its performance , 2003 .

[2]  Viral S. Mehta,et al.  Review and analysis of PEM fuel cell design and manufacturing , 2003 .

[3]  Erik Middelman,et al.  Improved PEM fuel cell electrodes by controlled self-assembly , 2002 .

[4]  Tsutomu Yoshitake,et al.  Preparation of fine platinum catalyst supported on single-wall carbon nanohorns for fuel cell application , 2002 .

[5]  F. Prinz,et al.  A sharp peak in the performance of sputtered platinum fuel cells at ultra-low platinum loading , 2002 .

[6]  E. Ticianelli,et al.  Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells , 2002 .

[7]  Zhigang Qi,et al.  Enhancement of PEM fuel cell performance by steaming or boiling the electrode , 2002 .

[8]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[9]  Tae-Hee Lee,et al.  Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells , 2002 .

[10]  A. John Appleby,et al.  Recent progress in performance improvement of the proton exchange membrane fuel cell (PEMFC) , 2002 .

[11]  H. Ha,et al.  Effect of the catalytic ink preparation method on the performance of polymer electrolyte membrane fuel cells , 2002 .

[12]  E. Gülzow,et al.  New results of PEFC electrodes produced by the DLR dry preparation technique , 2002 .

[13]  I. Hsing,et al.  Electrochemical characterization of binary carbon supported electrode in polymer electrolyte fuel cells , 2001 .

[14]  J. Fricke,et al.  Integration of carbon aerogels in PEM fuel cells , 2001 .

[15]  J. Song,et al.  Optimal composition of polymer electrolyte fuel cell electrodes determined by the AC impedance method , 2001 .

[16]  Mathias Schulze,et al.  Dry layer preparation and characterisation of polymer electrolyte fuel cell components , 2000 .

[17]  S. Cha,et al.  Performance of Proton Exchange Membrane Fuel Cell Electrodes Prepared by Direct Deposition of Ultrathin Platinum on the Membrane Surface , 1999 .

[18]  Jingrong Yu,et al.  Investigation of platinum utilization and morphology in catalyst layer of polymer electrolyte fuel cells , 1999 .

[19]  G. Squadrito,et al.  Improvement in the diffusion characteristics of low Pt-loaded electrodes for PEFCs , 1999 .

[20]  P. Pickup,et al.  Electron and proton transport in gas diffusion electrodes containing electronically conductive proton-exchange polymers , 1998 .

[21]  D. Peck,et al.  A novel process to fabricate membrane electrode assemblies for proton exchange membrane fuel cells , 1998 .

[22]  K. Choi,et al.  Electrode fabrication for proton exchange membrane fuel cells by pulse electrodeposition , 1998 .

[23]  Sanjeev Mukerjee,et al.  Effects of Nafion impregnation on performances of PEMFC electrodes , 1998 .

[24]  Chang-Soo Kim,et al.  Performance of a polymer electrolyte membrane fuel cell with thin film catalyst electrodes , 1998 .

[25]  J. Jindra,et al.  Porosity and catalyst utilization of thin layer cathodes in air operated PEM-fuel cells , 1998 .

[26]  C. Lamy,et al.  Electrocatalytic oxidation of methanol on platinum nanoparticles electrodeposited onto porous carbon substrates , 1997 .

[27]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[28]  Shimshon Gottesfeld,et al.  Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomers , 1995 .

[29]  S. Parthasarathy,et al.  High performance electrodes with very low platinum loading for polymer electrolyte fuel cells , 1995 .

[30]  O. J. Murphy,et al.  High power density proton-exchange membrane fuel cells , 1994 .

[31]  Sanjeev Mukerjee,et al.  Effect of sputtered film of platinum on low platinum loading electrodes on electrode kinetics of oxygen reduction in proton exchange membrane fuel cells , 1993 .

[32]  E. J. Taylor,et al.  Preparation of High‐Platinum‐Utilization Gas Diffusion Electrodes for Proton‐Exchange‐Membrane Fuel Cells , 1992 .

[33]  Edson A. Ticianelli,et al.  Localization of platinum in low catalyst loading electrodes to to attain high power densities in SPE fuel cells , 1988 .

[34]  Edson A. Ticianelli,et al.  Methods to Advance Technology of Proton Exchange Membrane Fuel Cells , 1988 .

[35]  R. D. Venter,et al.  Sputtered Fuel Cell Electrodes , 1987 .

[36]  H. Asano,et al.  Process for the manufacture of an electrode , 1985 .

[37]  Z. Qi,et al.  Low Pt loading high performance cathodes for PEM fuel cells , 2003 .

[38]  G. Squadrito,et al.  Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance , 2001 .

[39]  R. Fc.  High Performance Proton Exchange Membrane Fuel Cells , 1999 .

[40]  Patrick Bertrand,et al.  Oxygen reduction catalysts for polymer electrolyte fuel cells from the pyrolysis of FeII acetate adsorbed on 3,4,9,10-perylenetetracarboxylic dianhydride , 1999 .

[41]  Supramaniam Srinivasan,et al.  High performance proton exchange membrane fuel cells with sputter-deposited Pt layer electrodes , 1997 .

[42]  M. Verbrugge.  Selective electrodeposition of catalyst within membrane-electrode structures , 1994 .

[43]  A. Shukla,et al.  Performance of carbon-cloth bound porous-carbon electrodes containing an electrodeposited platinum catalyst towards the electrooxidation of methanol in sulphuric acid electrolyte , 1994 .

[44]  Shimshon Gottesfeld,et al.  Thin-film catalyst layers for polymer electrolyte fuel cell electrodes , 1992 .

[45]  M. Barak,et al.  Power Sources 4 , 1974 .