Terrestrial Laser Scanning as an Effective Tool to Retrieve Tree Level Height, Crown Width, and Stem Diameter

Accurate measures of forest structural parameters are essential to forest inventory and growth models, managing wildfires, and modeling of carbon cycle. Terrestrial laser scanning (TLS) fills the gap between tree scale manual measurements and large scale airborne LiDAR measurements by providing accurate below crown information through non-destructive methods. This study developed innovative methods to extract individual tree height, diameter at breast height (DBH), and crown width of trees in East Texas. Further, the influence of scan settings, such as leaf-on/leaf-off seasons, tree distance from the scanner, and processing choices, on the accuracy of deriving tree measurements were also investigated. DBH was retrieved by cylinder fitting at different height bins. Individual trees were extracted from the TLS point cloud to determine tree heights and crown widths. The R-squared value ranged from 0.91 to 0.97 when field measured DBH was validated against TLS derived DBH using different methods. An accuracy of 92% (RMSE = 1.51 m) was obtained for predicting tree heights. The R-squared value was 0.84 and RMSE was 1.08 m when TLS derived crown widths were validated using field measured crown widths. Examples of underestimations of field measured forest structural parameters due to tree shadowing have also been discussed in this study. The results from this study will benefit foresters and remote sensing studies from airborne and spaceborne platforms, for map upscaling or calibration purposes, for aboveground biomass estimation, and prudent decision making by the forest management.

[1]  S. Popescu.  Estimating biomass of individual pine trees using airborne lidar , 2007 .

[2]  William A. Bechtold,et al.  Five instruments for measuring tree height: an evaluation , 1994 .

[3]  M. Nieuwenhuis,et al.  Retrieval of forest structural parameters using LiDAR remote sensing , 2010, European Journal of Forest Research.

[4]  Sorin C. Popescu,et al.  Multi-temporal terrestrial laser scanning for modeling tree biomass change , 2014 .

[5]  S. Popescu,et al.  A voxel-based lidar method for estimating crown base height for deciduous and pine trees , 2008 .

[6]  Laura Chasmer,et al.  Investigating laser pulse penetration through a conifer canopy by integrating airborne and terrestrial lidar , 2006 .

[7]  N. Coops,et al.  Using airborne and ground-based ranging lidar to measure canopy structure in Australian forests , 2003 .

[8]  Guang Zheng,et al.  Retrieving Forest Inventory Variables with Terrestrial Laser Scanning (TLS) in Urban Heterogeneous Forest , 2011, Remote. Sens..

[9]  S. Popescu,et al.  Measuring individual tree crown diameter with lidar and assessing its influence on estimating forest volume and biomass , 2003 .

[10]  N. J. Tate,et al.  Estimating tree and stand variables in a Corsican Pine woodland from terrestrial laser scanner data , 2009 .

[11]  R. Küssner,et al.  Comparison of direct and indirect estimation of leaf area index in mature Norway spruce stands of eastern Germany , 2000 .

[12]  Scott D. Roberts,et al.  LiDAR A new tool for forest measurements , 2006 .

[13]  Piotr Zagórski,et al.  Use of terrestrial laser scanning (TLS) for monitoring and modelling of geomorphic processes and phenomena at a small and medium spatial scale in Polar environment (Scott River — Spitsbergen) , 2014 .

[14]  Maggi Kelly,et al.  A New Method for Segmenting Individual Trees from the Lidar Point Cloud , 2012 .

[15]  Yong Q. Tian,et al.  Estimating Basal Area and Stem Volume for Individual Trees from Lidar Data , 2007 .

[16]  Juha Hyyppä,et al.  Individual tree biomass estimation using terrestrial laser scanning , 2013 .

[17]  John R. Butnor,et al.  Meeting global policy commitments: carbon sequestration and southern pine forests , 2001 .

[18]  Gábor Brolly,et al.  Algorithms for stem mapping by means of terrestrial laser scanning , 2009 .

[19]  R. Dubayah,et al.  Lidar Remote Sensing for Forestry , 2000, Journal of Forestry.

[20]  M. Fournier,et al.  The use of terrestrial LiDAR technology in forest science: application fields, benefits and challenges , 2011, Annals of Forest Science.

[21]  M. Flood,et al.  LiDAR remote sensing of forest structure , 2003 .

[22]  E. Næsset,et al.  Laser scanning of forest resources: the nordic experience , 2004 .

[23]  J. K. Hiers,et al.  Ground-based LIDAR: a novel approach to quantify fine-scale fuelbed characteristics , 2009 .

[24]  P. Radtke,et al.  Ground-based Laser Imaging for Assessing Three-dimensional Forest Canopy Structure , 2006 .

[25]  I. Jonckheere,et al.  Influence of measurement set-up of ground-based LiDAR for derivation of tree structure , 2006 .

[26]  Pete Watt,et al.  Measuring forest structure with terrestrial laser scanning , 2005 .

[27]  S. Goetz,et al.  A meta-analysis of terrestrial aboveground biomass estimation using lidar remote sensing , 2013 .

[28]  K. Halligan,et al.  A Comparison of Individual Tree and Forest Plot Height Derived from Lidar and InSAR , 2009 .

[29]  P. Gessler,et al.  Characterizing forest succession with lidar data: An evaluation for the Inland Northwest, USA , 2009 .

[30]  W. Cohen,et al.  Lidar Remote Sensing for Ecosystem Studies , 2002 .

[31]  Thomas Udelhoven,et al.  The influence of scan mode and circle fitting on tree stem detection, stem diameter and volume extraction from terrestrial laser scans , 2013 .

[32]  C. Hopkinson,et al.  Assessing forest metrics with a ground-based scanning lidar , 2004 .