Stability Limits In Extreme Postures: Effects Of Load Positioning, Foot Placement, and Strength

Although injuries related to postural stability are prevalent, ergonomic job analyses traditionally have not addressed stability issues. In this research functional stability limits are quantified for persons standing in extreme postures under various external load and foot positioning conditions. Participants were asked to lean and displace their center of gravity (COG) as far as possible in eight directions to the sides and front of the body. Stability measures based on these COG displacements were calculated. All controlled variables significantly affected the stability measures. When standing unladen, participants extended their COG to within 99% of their theoretical maximum. Movement was much more restricted when handling a load (89%), especially when holding it with one hand on the shoulder (84%). On average, increased separation of the feet in a particular direction resulted in larger COG displacements in that direction. The results are discussed relative to their effects on balance and stability modeling.

[1]  P. Holliday,et al.  The relationship of postural sway in standing to the incidence of falls in geriatric subjects. , 1982, Age and ageing.

[2]  M A Holbein,et al.  Functional stability limits while holding loads in various positions. , 1997, International journal of industrial ergonomics.

[3]  D W Grieve.  The postural stability diagram (PSD): personal constraints on the static exertion of force. , 1979, Ergonomics.

[4]  David A. Winter,et al.  Sagittal Plane Balance and Posture in Human Walking , 1987, IEEE Engineering in Medicine and Biology Magazine.

[5]  D. Winter,et al.  Control of whole body balance in the frontal plane during human walking. , 1993, Journal of biomechanics.

[6]  Don B. Chaffin,et al.  A Biomechanical Model for Analysis of Symmetric Sagittal Plane Lifting , 1970 .

[7]  D W Grieve.  Environmental constraints on the static exertion of force: PSD analysis in task-design. , 1979, Ergonomics.

[8]  V. Dietz,et al.  Compensation of translational and rotational perturbations in human posture: Stabilization of the centre of gravity , 1989, Neuroscience Letters.

[9]  Terrence John Stobbe.  The development of a practical strength testing program for industry , 1982 .

[10]  T. Tokita,et al.  Postural response induced by horizontal sway of a platform. , 1983, Acta oto-laryngologica. Supplementum.

[11]  P. R. Davis,et al.  Human factors contributing to slips, trips and falls. , 1983, Ergonomics.

[12]  Don B. Chaffin,et al.  Biomechanical Computerized Simulation of Human Strength in Sagittal-Plane Activities , 1972 .

[13]  Brian E. Maki,et al.  A Posture Control Model and Balance Test for the Prediction of Relative Postural Stability , 1987, IEEE Transactions on Biomedical Engineering.