Vibration control of vehicles with active tuned mass damper

The purpose of this paper is to propose an alternative approach on controlling of vehicle vibrations by using active tuned mass damper. The approach is presented by simulation of a quarter-car model. Initially, a tuned mass damper is integrated on a vehicle model and its optimal parameters are determined by using 3D diagram of the maximum magnitudes of the sprung mass frequency response functions. Active control is obtained by adding an actuator element parallel to tuned mass damper. The fuzzy-sliding mode control method is utilized in reducing the displacement and acceleration magnitudes of sprung mass. Finally, comparison of active and passive responses in frequency and time domain are given to demonstrate vibration control improvement.

[1]  O. Kaynak,et al.  A comparison of various VSS techniques on the control of automated guided vehicles , 1995, 1995 Proceedings of the IEEE International Symposium on Industrial Electronics.

[2]  Chi-Chang Lin,et al.  Vibration suppression for high-speed railway bridges using tuned mass dampers , 2003 .

[3]  Nurkan Yagiz,et al.  Fuzzy Sliding-Mode Control of Active Suspensions , 2008, IEEE Transactions on Industrial Electronics.

[4]  S. Pourzeynali,et al.  Active control of high rise building structures using fuzzy logic and genetic algorithms , 2007 .

[5]  Johari Halim Shah Osman,et al.  A class of proportional-integral sliding mode control with application to active suspension system , 2004, Syst. Control. Lett..

[6]  O. Araz,et al.  Series tuned mass dampers in train-induced vibration control of railway bridges , 2017 .

[7]  Nurkan Yağiz.  Sliding Mode Control of a Multi-Degree-of-Freedom Structural System With Active Tuned Mass Damper , 2001 .

[8]  Nurkan Yagiz,et al.  Robust Sliding Mode Control of a Full Vehicle Without Suspension Gap Loss , 2005 .

[9]  H. Nijmeijer,et al.  Application of a Dynamic Vibration Absorber to a Piecewise Linear Beam System , 2004 .

[10]  Henk Nijmeijer,et al.  Robust control of an electromagnetic active suspension system: Simulations and measurements , 2013 .

[11]  Anjan Dutta,et al.  Multi-modal vibration control of truss bridges with tuned mass dampers under general loading , 2016 .

[12]  R. P. Jones,et al.  Fuzzy logic control of an automotive suspension system , 1995 .

[13]  Young-Bae Kim,et al.  Improved optimal sliding mode control for a non-linear vehicle active suspension system , 2017 .

[14]  Nurkan Yagiz,et al.  Improving the ride comfort of vehicle passenger using fuzzy sliding mode controller , 2015 .

[15]  Nurkan Yagiz,et al.  High order sliding mode control with estimation for vehicle active suspensions , 2018, Trans. Inst. Meas. Control.

[16]  B. G. Korenev,et al.  Dynamic Vibration Absorbers: Theory and Technical Applications , 1993 .

[17]  V. Utkin.  Variable structure systems with sliding modes , 1977 .

[18]  Nurkan Yagiz,et al.  Adaptive backstepping control with estimation for the vibration isolation of buildings , 2012 .

[19]  D. Hrovat,et al.  Survey of Advanced Suspension Developments and Related Optimal Control Applications, , 1997, Autom..

[20]  Nurkan Yagiz,et al.  Uporaba logino mehkega krmiljenja za izboljöanje udobja voûnje vozil The Use of Fuzzy-Logic Control to Improve the Ride Comfort of Vehicles , 2007 .

[21]  Paul I. Ro,et al.  A sliding mode controller for vehicle active suspension systems with non-linearities , 1998 .