Design and analysis of equal-channel angular pressing of Al6061: a comparative study

[1]  J. Ihlemann,et al.  Plastic flow during equal-channel angular pressing with arbitrary tool angles , 2020 .

[2]  H. Jafarian,et al.  Microstructural development and its effects on tensile properties of a high Ni TRIP steel produced by repetitive corrugation and straightening via rolling (RCSR) , 2020 .

[3]  K. Abrinia,et al.  Analysis of plastic deformation behavior of ultrafine-grained aluminum processed by the newly developed ultrasonic vibration enhanced ECAP: Simulation and experiments , 2020 .

[4]  Cheng Liu,et al.  Microstructure, Texture Evolution, and Mechanical Properties of ECAP-Processed ZAT522 Magnesium Alloy , 2019, Acta Metallurgica Sinica (English Letters).

[5]  B. Binesh,et al.  Finite element simulation of the T-shaped ECAP processing of round samples , 2018 .

[6]  S. A. Balogun,et al.  Mechanical Characteristics of 6063 Aluminum-Steel Dust Composite , 2012 .

[7]  T. Langdon,et al.  Stable and Unstable Flow in Materials Processed by Equal-Channel Angular Pressing with an Emphasis on Magnesium Alloys , 2010 .

[8]  N. Mahallawy,et al.  3D FEM simulations for the homogeneity of plastic deformation in Al–Cu alloys during ECAP , 2010 .

[9]  K. T. Ramesh,et al.  Tensile behavior and dynamic failure of aluminum 6092/B4C composites , 2006 .

[10]  J. C. Werenskiold,et al.  Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry , 2005 .

[11]  J. Marte,et al.  Effect of friction, backpressure and strain rate sensitivity on material flow during equal channel angular extrusion , 2005 .

[12]  Mark A.M. Bourke,et al.  Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion , 2004 .

[13]  M. Vishnoi,et al.  Analysis of plastic deformation of Al6063, Magnesium AZ91C and commercially used Titanium alloys using ECAP , 2020 .

[14]  D. Ciccarelli,et al.  Characterization, modeling and microstructure of composite aluminium alloy specimens after ECAP , 2020 .

[15]  M. Rao,et al.  Mechanical Characterization of Stir Cast Al 6063 TiO2-Cu Reinforced Hybrid Metal Matrix Composites , 2018 .

[16]  R. Kocich,et al.  Study of deformation behavior, structure and mechanical properties of the AlSiMnFe alloy during ECAP-PBP. , 2013, Micron.