Dynamic phase evaluation in sparse-sampled temporal speckle pattern sequence.

The rapid progress of modern manufacturing technology has posed stringent requirements for inspecting techniques for vibration characterization and dynamic testing. Because of its simplicity, accuracy, and whole-field character, speckle interferometry has served as one of the major techniques for dynamic measurement, where normally a dense-sampled temporal speckle sequence is captured for phase retrieval using Fourier or wavelet transforms. In this Letter, a method is proposed for phase evaluation of sparse-sampled speckle patterns when the sampling rate is lower than two points per temporal cycle. Dynamic experiments using a high-speed camera demonstrated the effectiveness of the proposed method for complicated wrapped phase retrieval in electronic/digital speckle pattern interferometry.

[1]  Yu Fu,et al.  Determination of surface contour by temporal analysis of shadow moiré fringes , 2004 .

[2]  Wei-Chung Wang,et al.  Vibration measurement by the time-averaged electronic speckle pattern interferometry methods. , 1996, Applied optics.

[3]  Yu Fu,et al.  Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern , 2004 .

[4]  H J Tiziani,et al.  Speckle interferometry with temporal phase evaluation for measuring large-object deformation. , 1998, Applied optics.

[5]  Qian Kemao,et al.  Sequential demodulation of a single fringe pattern guided by local frequencies. , 2007, Optics letters.

[6]  Wolfgang Osten,et al.  Kinematic and deformation parameter measurement by spatiotemporal analysis of an interferogram sequence. , 2007, Applied optics.

[7]  Anand Asundi,et al.  Generalized three-dimensional windowed Fourier transform for fringe analysis. , 2006, Optics letters.

[8]  A J Moore,et al.  Measurement of complex surface deformation by high-speed dynamic phase-stepped digital speckle pattern interferometry. , 2000, Optics letters.

[9]  M. P. Kothiyal,et al.  Use of spatial phase shifting technique in digital speckle pattern interferometry (DSPI) and digital shearography (DS). , 2006, Optics express.

[10]  Y. Y. Hung,et al.  NDT&E using shearography with impulsive thermal stressing and clustering phase extraction , 2009 .

[11]  Nandini Bhattacharya,et al.  Maintaining sub-pixel alignment for a single-camera two-bucket shearing speckle interferometer , 2005 .

[12]  Wei An,et al.  Speckle interferometry for measurement of continuous deformations , 2003 .

[13]  G. G. Romero,et al.  Vibration Analysis of Perforated Plates Using Time-Average Digital Speckle Pattern Interferometry , 2010 .

[14]  J. M. Huntley,et al.  Temporal phase-unwrapping algorithm for automated interferogram analysis. , 1993, Applied optics.

[15]  Wolfgang Osten,et al.  High-speed digital holographic interferometry for vibration measurement. , 2006, Applied optics.

[16]  Farrokh Janabi-Sharifi,et al.  Dynamic phase measurement in shearography by clustering method and Fourier filtering. , 2011, Optics express.

[17]  Long Liu,et al.  Shearographic phase retrieval using one single specklegram: a clustering approach , 2008 .

[18]  Y. Y. Hung,et al.  Review and comparison of shearography and active thermography for nondestructive evaluation , 2009 .

[19]  Huai Min Shang,et al.  Application of the holographic carrier fringe and FFT technique for deformation measurement , 1996 .

[20]  M Adachi,et al.  Deformation-phase measurement of diffuse objects that have started nonrepeatable dynamic deformation. , 2001, Applied optics.

[21]  Qian Kemao,et al.  Frequency guided methods for demodulation of a single fringe pattern. , 2009, Optics express.

[22]  G. H. Kaufmann,et al.  Phase-shifted dynamic speckle pattern interferometry at 1 kHz. , 1999, Applied optics.