Preparation and 1500 °C oxidation behavior of crack-free bentonite doped MoSi2 protective coating on molybdenum

[1]  Q. Fu,et al.  Multi-layered structural designs of MoSi2/mullite anti-oxidation coating for SiC-coated C/C composites , 2021 .

[2]  P. Feng,et al.  Effect of the ZrB2 content on the oxygen blocking ability of ZrB2-SiC coating at 1973K , 2021 .

[3]  Xiaohong Wang,et al.  Microstructure and high-temperature oxidation resistance of MoSi2-ZrO2 composite coatings for Niobium substrate , 2021, Journal of the European Ceramic Society.

[4]  Liping Huang,et al.  Effect of Yb2O3 addition on oxidation/ablation behaviors of ZrB2-MoSi2 composite coating under different environment , 2020 .

[5]  Wei Li,et al.  Oxidation inhibition behaviors of the HfB2-SiC-TaSi2 coating for carbon structural materials at 1700 °C , 2020 .

[6]  Gang Zhao,et al.  Formation and oxidation behavior of Ce-modified MoSi2-NbSi2 coating on niobium alloy , 2020 .

[7]  Sainan Liu,et al.  Oxidation behaviour and microstructure of a dense MoSi2 ceramic coating on Ta substrate prepared using a novel two-step process , 2020 .

[8]  Seyed Ali Delbari,et al.  Strengthening of TiC ceramics sintered by spark plasma via nano-graphite addition , 2020 .

[9]  S. Šturm,et al.  A spark-plasma-sintering approach to the manufacture of anisotropic Nd-Fe-B permanent magnets , 2020 .

[10]  Q. Fu,et al.  Oxidation behavior of SiC-HfB2-Si coating on C/C composites prepared by slurry dipping combined with gaseous Si infiltration , 2020 .

[11]  Xiaohong Shi,et al.  Oxidation behavior and mechanism of MoSi2-Y2O3 composite coating fabricated by supersonic atmospheric plasma spraying , 2020 .

[12]  Yan-qiang Qiao,et al.  Study on the diffusion barrier effect of WSi2 layer at the MoSi2/Nb-Ti-Si based alloy interface , 2020 .

[13]  T. Hang,et al.  Effect of Sn surface diffusion on growth behaviors of intermetallic compounds in cu/Ni/SnAg microbumps , 2020 .

[14]  R. Hassanien,et al.  Dielectric behavior of spark plasma sintered BaTi0.7Zr0.3O3 relaxor ferroelectrics , 2019 .

[15]  H. Lei,et al.  Influence of different coating structures on the oxidation resistance of MoSi2 coatings , 2019 .

[16]  Ping Zhang,et al.  Microstructure, properties and oxidation behavior of MoSi2-MoB-ZrO2 coating for Mo substrate using spark plasma sintering , 2019, Surface and Coatings Technology.

[17]  Xiaohong Wang,et al.  Recycling Molybdenum Oxides from Waste Molybdenum Disilicides: Oxidation Experimental Study and Photocatalytic Properties , 2019, Oxidation of Metals.

[18]  Xiaohong Wang,et al.  Preparation of oxidation protective MoSi2–SiC coating on graphite using recycled waste MoSi2 by one-step spark plasma sintering method , 2019 .

[19]  Haibo Ouyang,et al.  ZrB2 particles reinforced glass coating for oxidation protection of carbon/carbon composites , 2019, Journal of Advanced Ceramics.

[20]  Ping Zhang,et al.  Reaction synthesis of spark plasma sintered MoSi2-B4C coatings for oxidation protection of Nb alloy , 2019, Ceramics International.

[21]  E. Salernitano,et al.  SiC/MoSi2 based coatings for Cf/C composites by two step pack cementation , 2019, Journal of the European Ceramic Society.

[22]  C. Ding,et al.  Ablation resistance of ZrC-MoSi2/ZrC-SiC double-layered coating in a plasma flame , 2018, Corrosion Science.

[23]  Q. Fu,et al.  Oxidation response determined by multiphase-dependent melting degree of plasma sprayed MoSi2 on Nb-based alloy , 2018, Journal of Alloys and Compounds.

[24]  Yun-gang Li,et al.  Effect of siliconizing temperature on microstructure and phase constitution of Mo–MoSi2 functionally graded materials , 2018, Ceramics International.

[25]  S. Zwaag,et al.  Protecting the MoSi2 healing particles for thermal barrier coatings using a sol-gel produced Al2O3 coating , 2018, Journal of the European Ceramic Society.

[26]  J. Sha,et al.  Isothermal and cyclic oxidation behaviours of MoSi2 with additions of B at 1250 °C prepared by spark plasma sintering , 2018 .

[27]  Jen-Fin Lin,et al.  Effects of SiO2 film thickness and operating temperature on thermally-induced failures in through-silicon-via structures , 2018, Microelectron. Reliab..

[28]  Wei Li,et al.  Refractory metal silicides reinforced by in-situ formed Nb2O5 fibers and mullite nanoclusters , 2017 .

[29]  Y. Qian,et al.  Ultra-high temperature oxidation behavior of micro-laminated ZrC/MoSi2 coating on C/C composite , 2017 .

[30]  T. Troczynski,et al.  Comparative studies of the oxidation of MoSi2 based materials: Low-temperature oxidation (300–900 °C) , 2017 .

[31]  Chengguo Wang,et al.  A MoSi2-SiOC-Si3N4/SiC anti-oxidation coating for C/C composites prepared at relatively low temperature , 2017 .

[32]  Daniel R. Neuville,et al.  Molecular structure, configurational entropy and viscosity of silicate melts: Link through the Adam and Gibbs theory of viscous flow , 2016 .

[33]  Shizhong Wei,et al.  Preparation and characterization of Mo/Al2O3 composites , 2016 .

[34]  Zaoli Zhang,et al.  Microstructure characterization of Al–Cr–Fe quasicrystals sintered using spark plasma sintering , 2015 .

[35]  Yaming Wang,et al.  Crack-healing behavior and strength recovery of hot-pressed TZ3Y20A–MoSi2 ceramics , 2015 .

[36]  F. Veniali,et al.  Improvement of thermally sprayed WC-Co/NiCr coatings by surface laser processing , 2015 .

[37]  Li-li Gao,et al.  Interfacial compounds growth of SnAgCu(nano La2O3)/Cu solder joints based on experiments and FEM , 2015 .

[38]  Hejun Li,et al.  Oxidation protection of carbon/carbon composites by a novel SiC nanoribbon-reinforced SiC–Si ceramic coating , 2015 .

[39]  F. Akhtar,et al.  Synthesis, microstructure and properties of MoSi2–5 vol%Al2O3 composites , 2014 .

[40]  Yi Wang,et al.  Oxidation and interdiffusion behavior of Niobium substrate coated MoSi 2 coating prepared by spark plasma sintering , 2014 .

[41]  H. Nishikawa,et al.  Effects of In and Ni Addition on Microstructure of Sn-58Bi Solder Joint , 2014, Journal of Electronic Materials.

[42]  Min Liu,et al.  In situ synthesis of α-alumina layer at top yttrium-stabilized zirconia thermal barrier coatings for oxygen barrier , 2014 .

[43]  Q. Gong,et al.  In-situ fabrication of MoSi2/SiC–Mo2C gradient anti-oxidation coating on Mo substrate and the crucial effect of Mo2C barrier layer at high temperature , 2014 .

[44]  W. Lijie,et al.  Formation of B-modified MoSi2 coating on pure Mo prepared through HAPC process , 2014 .

[45]  Dezhi Wang,et al.  Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying , 2013 .

[46]  D. Sciti,et al.  Microstructural characterization of ZrC-MoSi2 composites oxidized in air at high temperatures , 2013 .

[47]  Baolin Liu,et al.  Influence of Bentonite on Properties of Glass-Based-Sintering Material for Borehole-Wall Renovation , 2013 .

[48]  S. Guo,et al.  Oxidation behavior of ZrB2–MoSi2–SiC composites in air at 1500 °C , 2011 .

[49]  Hejun Li,et al.  A Si–Mo–W Coating to Protect SiC-Coated Carbon/Carbon Composites Against Oxidation , 2009 .

[50]  Xiaohong Wang,et al.  Effect of high-temperature preoxidation treatment on the low-temperature oxidation behavior of a MoSi2-based composite at 500 °C , 2009 .

[51]  Jianguang Xu,et al.  Cyclic oxidation behaviors of MoSi2 with different relative density , 2008 .

[52]  Hejun Li,et al.  A MoSi2–SiC–Si oxidation protective coating for carbon/carbon composites , 2007 .

[53]  W. Chen,et al.  Combustion synthesis of MoSi2 and MoSi2–Mo5Si3 composites , 2007 .

[54]  Zhi-gang Cai,et al.  Morphology, structure and formation mechanism of silicide coating by pack cementation process , 2006 .

[55]  Gyeungho Kim,et al.  Microstructure ofin situ MoSi2/SiC nanocomposite coating formed on Mo substrate by displacement reaction , 2005 .

[56]  A. K. Suri,et al.  Preparation of TZM alloy by aluminothermic smelting and its characterization , 2005 .

[57]  Richard B. Williams,et al.  BENTONITE, KAOLIN, AND SELECTED CLAY MINERALS , 2005 .

[58]  T. Graule,et al.  MoSi2–Al2O3 electroconductive ceramic composites , 2004 .

[59]  Gyeungho Kim,et al.  Microstructure and growth kinetics of the Mo5Si3 and Mo3Si layers in MoSi2/Mo diffusion couple , 2003 .

[60]  T. Mitchell,et al.  Alloying of MoSi2 for improved mechanical properties , 2001 .

[61]  Jonny Rutqvist,et al.  Coupled thermo-hydro-mechanical analysis of a heater test in fractured rock and bentonite at Kamaishi Mine : comparison of field results to predictions of four finite element codes , 2001 .

[62]  Wan Jiang.  Working Life Evaluation of MoSi 2 /oxide Composite Heating Elements , 2000 .

[63]  S. Ramasesha,et al.  Oxidation of MoSi2 and MoSi2-based materials , 1999 .

[64]  K. Chou.  A general solution model for predicting ternary thermodynamic properties , 1995 .

[65]  S. Deevi.  In-situ synthesis of MoSi2lAl2o3 composite by a thermite reaction , 1995 .

[66]  A. Vasudévan,et al.  A comparative overview of molybdenum disilicide composites , 1992 .