Development of an SH Wave Magnetostrictive Transducer Module for Guided Wave Testing of Plate Structures

Abstract Recently much attention has been paid to a guided wave due to its effective applicability to long range and fast inspection of structures. In guided wave based NDE, the appropriate selection of wave modes is one of important factors since the test performance is highly dependent on which mode of guided waves is employed. As far as plate-like structures are concerned, so far, SH guided wave has not been frequently applied compared to Lamb waves, which is mostly caused by the lack of proper and convenient transducers to generate and measure the SH waves. In this investigation, a new small-sized SH guided wave transducer based on magnetostriction is proposed. The present transducer was designed to be modular and be used with shear couplant to avoid the inconvenience of the existing magnetostrictive patch transducers, which comprises the ferromagnetic patch tightly bonded to a structure. The wave transduction mechanism and the detailed configuration of the present transducer are presented. Experimental verification is also conducted on test specimens and the results confirm the good performance of the present transducer module.

[1]  Hegeon Kwun,et al.  Magnetostrictive generation and detection of longitudinal, torsional, and flexural waves in a steel rod , 1994 .

[2]  R. B. Thompson.  Generation of horizontally polarized shear waves in ferromagnetic materials using magnetostrictively coupled meander‐coil electromagnetic transducers , 1979 .

[3]  K. A. Bartels,et al.  Experimental observation of wave dispersion in cylindrical shells via time‐frequency analysis , 1995 .

[4]  Daniel A. Kuchma,et al.  Estimation of Corrosion Damage in Steel Reinforced Mortar Using Guided Waves , 2005 .

[5]  Joseph L. Rose,et al.  A Baseline and Vision of Ultrasonic Guided Wave Inspection Potential , 2002 .

[6]  Seung-Hyun Cho,et al.  Guided wave transduction experiment using a circular magnetostrictive patch and a figure-of-eight coil in nonferromagnetic plates , 2006 .

[7]  Seung-Hyun Cho,et al.  Noncontact torsional wave transduction in a rotating shaft using oblique magnetostrictive strips , 2006 .

[8]  H. Ogi,et al.  An SH-wave EMAT technique for gas pipeline inspection , 1999 .

[9]  Peter Cawley,et al.  Practical long range guided wave testing: applications to pipes and rails , 2003 .

[10]  Seung-Hyun Cho,et al.  Z-shaped magnetostrictive patch for efficient transduction of a torsional wave mode in a cylindrical waveguide , 2006 .

[11]  Seung Hyun Cho,et al.  Beam-focused shear-horizontal wave generation in a plate by a circular magnetostrictive patch transducer employing a planar solenoid array , 2008 .

[12]  P. Cawley,et al.  The use of Lamb waves for the long range inspection of large structures , 1996 .