A Novel Dead-Time Compensation Method for Direct Predictive Control

This paper analyses the theory of dead time in Direct Predictive Control, and then proposes a novel dead-time compensation method which can optimize the process of selecting the Voltage Vector by the cost function. The simulation results show that the THD of phase current is decreased and the waveform is improved after using the proposed method, which verifies the analysis and confirms the performance of the new method.

[1]  Hyun-Soo Kim,et al.  On-line dead-time compensation method using disturbance observer , 2003 .

[2]  Guo Xinhua.  Dead-time compensation method of restraining zero-current clamping effects for VSI , 2011 .

[3]  Xu Dianguo,et al.  Static error elimination algorithm for PMSM predictive current control , 2014, Proceedings of the 33rd Chinese Control Conference.

[4]  Alberto Bemporad,et al.  The explicit solution of model predictive control via multiparametric quadratic programming , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[5]  Pablo Lezana,et al.  Predictive control of three-phase inverter , 2004 .

[6]  R. Kennel,et al.  Direct model predictive control - a new direct predictive control strategy for electrical drives , 2005, 2005 European Conference on Power Electronics and Applications.

[7]  Ming Yang,et al.  Static error elimination algorithm for PMSM predictive current control , 2014, CCC 2014.

[8]  Pablo Lezana,et al.  Predictive Current Control of a Voltage Source Inverter , 2004, IEEE Transactions on Industrial Electronics.

[9]  Bruno Allard,et al.  A Comparative Study of Predictive Current Control Schemes for a Permanent-Magnet Synchronous Machine Drive , 2009, IEEE Transactions on Industrial Electronics.

[10]  Erik Schaltz,et al.  Switching Frequency Reduction Using Model Predictive Direct Current Control for High-Power Voltage Source Inverters , 2011, IEEE Transactions on Industrial Electronics.

[11]  S. Doki,et al.  Dead-time compensation in model predictive instantaneous-current control , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.