A Low-Cost Electrochemical Biosensor for Rapid Bacterial Detection

A three-electrode electrochemical biosensor has been developed using printed circuit boards for detecting bacterial contamination. This low-cost, small-size device consists of thin-film gold electrodes and is fabricated using photo-lithography paired with electro-deposition. Pathogen presence is deduced by detection of change in electrical impedance caused by binding of the pathogen to bio-receptors coated on the sensor surface. The biosensor has a total area of 3.2 cm and requires only 100 L of test sample for detection. The sensor geometry has been optimized using techniques from Design of Experiments, and the device can be operated using a small ac excitation potential of magnitude 5 mV. The sensor is tested on the common food-borne pathogen Salmonella typhimurium and is able detect bacterial concentrations of the order of 500 CFU/mL within 6 min. In this paper, the design and fabrication of the biosensor is detailed along with the experiments that validate its performance.

[1]  Omowunmi A. Sadik,et al.  Impedance Spectroscopy: A Powerful Tool for Rapid Biomolecular Screening and Cell Culture Monitoring , 2005 .

[2]  Yanbin Li,et al.  Detection of viable Salmonella using microelectrode-based capacitance measurement coupled with immunomagnetic separation. , 2006, Journal of microbiological methods.

[3]  T. Alford,et al.  Label-Free and Ultra-Low Level Detection of Salmonella enterica Serovar Typhimurium Using Electrochemical Impedance Spectroscopy , 2009 .

[4]  Y. Chuang,et al.  Disposable amperometric immunosensing strips fabricated by Au nanoparticles-modified screen-printed carbon electrodes for the detection of foodborne pathogen Escherichia coli O157:H7. , 2008, Biosensors & bioelectronics.

[5]  Douglas Cochran,et al.  A methodology for rapid detection of Salmonella typhimurium using label-free electrochemical impedance spectroscopy. , 2008, Biosensors & bioelectronics.

[6]  Joseph Irudayaraj,et al.  A mixed self-assembled monolayer-based surface plasmon immunosensor for detection of E. coli O157:H7. , 2006, Biosensors & bioelectronics.

[7]  J. Powers,et al.  Antimicrobial Drug Resistance, Regulation, and Research , 2006, Emerging infectious diseases.

[8]  M. D. Rooij,et al.  Electrochemical Methods: Fundamentals and Applications , 2003 .

[9]  H. J. Fels-Klerx,et al.  Suitability of Rapid Detection Methods for Salmonella in Poultry Slaughterhouses , 2009 .

[10]  E. Alocilja,et al.  A high density microelectrode array biosensor for detection of E. coli O157:H7. , 2005, Biosensors & bioelectronics.

[11]  E. Alocilja,et al.  A conductometric biosensor for biosecurity. , 2003, Biosensors & bioelectronics.

[12]  Mark E.J. Woolhouse,et al.  Host Range and Emerging and Reemerging Pathogens , 2005, Emerging infectious diseases.

[13]  Karen A. F. Copeland.  Design and Analysis of Experiments, 5th Ed. , 2001 .

[14]  S.P. Mohanty,et al.  Biosensors: a tutorial review , 2006, IEEE Potentials.

[15]  Sergei Svarovsky,et al.  Label-free impedimetric detection of glycan-lectin interactions. , 2007, Analytical chemistry.

[16]  Jeong-Woo Choi,et al.  Surface plasmon resonance immunosensor for the detection of Salmonella typhimurium. , 2004, Biosensors & bioelectronics.