Understanding Fundamentals and Reaction Mechanisms of Electrode Materials for Na-Ion Batteries.

Development of efficient, affordable, and sustainable energy storage technologies has become an area of interest due to the worsening environmental issues and rising technological dependence on Li-ion batteries. Na-ion batteries (NIBs) have been receiving intensive research efforts during the last few years. Owing to their potentially low cost and relatively high energy density, NIBs are promising energy storage devices, especially for stationary applications. A fundamental understanding of electrode properties during electrochemical reactions is important for the development of low cost, high-energy density, and long shelf life NIBs. This Review aims to summarize and discuss reaction mechanisms of the major types of NIB electrode materials reported. By appreciating how the material works and the fundamental flaws it possesses, it is hoped that this Review will assist readers in coming up with innovative solutions for designing better materials for NIBs.

[1]  Robert W. Black,et al.  Uptake of CO2 in Layered P2-Na0.67Mn0.5Fe0.5O2: Insertion of Carbonate Anions , 2015 .

[2]  Graeme Henkelman,et al.  Removal of interstitial H2O in hexacyanometallates for a superior cathode of a sodium-ion battery. , 2015, Journal of the American Chemical Society.

[3]  Chenglong Zhao,et al.  Recent advances of electrode materials for low-cost sodium-ion batteries towards practical application for grid energy storage , 2017 .

[4]  Zhe Hu,et al.  Carbon‐Coated Na3.32Fe2.34(P2O7)2 Cathode Material for High‐Rate and Long‐Life Sodium‐Ion Batteries , 2017, Advanced materials.

[5]  Jun Lu,et al.  Layered P2/O3 Intergrowth Cathode: Toward High Power Na‐Ion Batteries , 2014 .

[6]  Xinping Ai,et al.  High capacity and rate capability of amorphous phosphorus for sodium ion batteries. , 2013, Angewandte Chemie.

[7]  Bin Yao,et al.  Enhanced rate and cycling performance of FeCO3/graphene composite for high energy Li ion battery anodes , 2014 .

[8]  Zhong Li,et al.  Niobium doped lithium titanate as a high rate anode material for Li-ion batteries , 2010 .

[9]  D. Bresser,et al.  Unfolding the Mechanism of Sodium Insertion in Anatase TiO2 Nanoparticles , 2015 .

[10]  J. Whitacre,et al.  Na4Mn9O18 as a positive electrode material for an aqueous electrolyte sodium-ion energy storage device , 2010 .

[11]  Jean-Marie Tarascon,et al.  In search of an optimized electrolyte for Na-ion batteries , 2012 .

[12]  S. Ong,et al.  Vacancy Ordering in O3-Type Layered Metal Oxide Sodium-Ion Battery Cathodes , 2015 .

[13]  Yongil Kim,et al.  Tin Phosphide as a Promising Anode Material for Na‐Ion Batteries , 2014, Advanced materials.

[14]  Wataru Murata,et al.  Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell , 2012 .

[15]  Hong Wang,et al.  Electrolyte design strategies and research progress for room-temperature sodium-ion batteries , 2017 .

[16]  Ya‐Xia Yin,et al.  Methods for the Stabilization of Nanostructured Electrode Materials for Advanced Rechargeable Batteries , 2017 .

[17]  Andrew J. Binder,et al.  Mesoporous Prussian blue analogues: template-free synthesis and sodium-ion battery applications. , 2014, Angewandte Chemie.

[18]  Docheon Ahn,et al.  Anomalous Jahn–Teller behavior in a manganese-based mixed-phosphate cathode for sodium ion batteries , 2015 .

[19]  K. Kubota,et al.  P2-type Na(2/3)Ni(1/3)Mn(2/3-x)Ti(x)O2 as a new positive electrode for higher energy Na-ion batteries. , 2014, Chemical communications.

[20]  Feng Wu,et al.  Polyanion‐Type Electrode Materials for Sodium‐Ion Batteries , 2017, Advanced science.

[21]  Hyunchul Kim,et al.  Sodium intercalation chemistry in graphite , 2015 .

[22]  J. Tarascon,et al.  Correlation Between Microstructure and Na Storage Behavior in Hard Carbon , 2016 .

[23]  Jean Roncali,et al.  Molecular Engineering of the Band Gap of π-Conjugated Systems: Facing Technological Applications , 2007 .

[24]  Hyun-Wook Lee,et al.  High-capacity battery cathode prelithiation to offset initial lithium loss , 2016, Nature Energy.

[25]  Jun Chen,et al.  MoS2 nanoflowers with expanded interlayers as high-performance anodes for sodium-ion batteries. , 2014, Angewandte Chemie.

[26]  J. Cabana,et al.  Beyond Intercalation‐Based Li‐Ion Batteries: The State of the Art and Challenges of Electrode Materials Reacting Through Conversion Reactions , 2010, Advanced materials.

[27]  Laure Monconduit,et al.  Better cycling performances of bulk Sb in Na-ion batteries compared to Li-ion systems: an unexpected electrochemical mechanism. , 2012, Journal of the American Chemical Society.

[28]  Xiulei Ji,et al.  An Organic Pigment as a High‐Performance Cathode for Sodium‐Ion Batteries , 2014 .

[29]  Clare P. Grey,et al.  Insights into the Nature and Evolution upon Electrochemical Cycling of Planar Defects in the β-NaMnO2 Na-Ion Battery Cathode: An NMR and First-Principles Density Functional Theory Approach , 2016 .

[30]  Haoshen Zhou,et al.  Splash Combustion Synthesis and Exploration of Alkali Metal Pyrophosphate (A2MP2O7, A = Li, Na) Cathodes , 2013 .

[31]  M. Ashokkumar,et al.  Conjugated polymer based on oligobenzo[c]thiophene with low-lying HOMO energy level as potential donor for bulk heterojunction solar cells , 2013 .

[32]  Jun-ichi Yamaki,et al.  Cathode properties of metal trifluorides in Li and Na secondary batteries , 2009 .

[33]  M. Armand,et al.  Na0.67Mn1−xMgxO2 (0 ≤ x ≤ 0.2): a high capacity cathode for sodium-ion batteries , 2014 .

[34]  J. Tarascon,et al.  Rationalization of Intercalation Potential and Redox Mechanism for A2Ti3O7 (A = Li, Na) , 2013 .

[35]  Bruno Scrosati,et al.  Advanced Na[Ni0.25Fe0.5Mn0.25]O2/C-Fe3O4 sodium-ion batteries using EMS electrolyte for energy storage. , 2014, Nano letters.

[36]  Y. Bando,et al.  Amorphous Phosphorus/Nitrogen-Doped Graphene Paper for Ultrastable Sodium-Ion Batteries. , 2016, Nano letters.

[37]  Jang‐Yeon Hwang,et al.  Sodium-ion batteries: present and future. , 2017, Chemical Society reviews.

[38]  Zhichuan J. Xu,et al.  Recent developments in electrode materials for sodium-ion batteries , 2015 .

[39]  Xiaobo Ji,et al.  First exploration of Na-ion migration pathways in the NASICON structure Na3V2(PO4)3 , 2014 .

[40]  Marc D. Walter,et al.  Monodisperse antimony nanocrystals for high-rate Li-ion and Na-ion battery anodes: nano versus bulk. , 2014, Nano letters.

[41]  Jun Chen,et al.  All organic sodium-ion batteries with Na₄C₈H₂O₆. , 2014, Angewandte Chemie.

[42]  Xiulin Fan,et al.  Superior Stable Self‐Healing SnP3 Anode for Sodium‐Ion Batteries , 2015 .

[43]  Ramazan Kahraman,et al.  Na2FeP2O7 as a Promising Iron‐Based Pyrophosphate Cathode for Sodium Rechargeable Batteries: A Combined Experimental and Theoretical Study , 2013 .

[44]  M. Pyo,et al.  Non-crystalline oligopyrene as a cathode material with a high-voltage plateau for sodium ion batteries , 2014 .

[45]  Kai Zhang,et al.  Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries , 2015, Advanced materials.

[46]  Charles E. Johnson,et al.  The reaction mechanism of SnSb and Sb thin film anodes for Na-ion batteries studied by X-ray diffraction, 119Sn and 121Sb Mössbauer spectroscopies , 2014 .

[47]  Shuang Yuan,et al.  Engraving Copper Foil to Give Large‐Scale Binder‐Free Porous CuO Arrays for a High‐Performance Sodium‐Ion Battery Anode , 2014, Advanced materials.

[48]  Yunhui Huang,et al.  Routes to High Energy Cathodes of Sodium‐Ion Batteries , 2016 .

[49]  Haihui Wang,et al.  High specific capacity of TiO2-graphene nanocomposite as an anode material for lithium-ion batteries in an enlarged potential window , 2012 .

[50]  Xiulin Fan,et al.  Roll-to-roll fabrication of organic nanorod electrodes for sodium ion batteries , 2015 .

[51]  P. Hagenmuller,et al.  Structural classification and properties of the layered oxides , 1980 .

[52]  Xiaobo Ji,et al.  Investigation of the sodium ion pathway and cathode behavior in Na₃V₂(PO₄)₂F₃ combined via a first principles calculation. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[53]  Lin Gu,et al.  Direct atomic-scale confirmation of three-phase storage mechanism in Li4Ti5O12 anodes for room-temperature sodium-ion batteries , 2013, Nature Communications.

[54]  K. Kang,et al.  Highly Stable Iron- and Manganese-Based Cathodes for Long-Lasting Sodium Rechargeable Batteries , 2016 .

[55]  Y. Meng,et al.  An advanced cathode for Na-ion batteries with high rate and excellent structural stability. , 2013, Physical chemistry chemical physics : PCCP.

[56]  Zhichuan J. Xu,et al.  A Review on Design Strategies for Carbon Based Metal Oxides and Sulfides Nanocomposites for High Performance Li and Na Ion Battery Anodes , 2017 .

[57]  P. Bruce,et al.  Structurally stable Mg-doped P2-Na2/3Mn1−yMgyO2 sodium-ion battery cathodes with high rate performance: insights from electrochemical, NMR and diffraction studies , 2016 .

[58]  Hongsen Li,et al.  Flexible Sodium‐Ion Pseudocapacitors Based on 3D Na2Ti3O7 Nanosheet Arrays/Carbon Textiles Anodes , 2016 .

[59]  Yuesheng Wang,et al.  A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries , 2013, Nature Communications.

[60]  A. Kuwabara,et al.  Why is sodium-intercalated graphite unstable? , 2017 .

[61]  Yan Yao,et al.  Nanoflake‐Assembled Hierarchical Na3V2(PO4)3/C Microflowers: Superior Li Storage Performance and Insertion/Extraction Mechanism , 2015 .

[62]  Aram Choi,et al.  4,4′-Biphenyldicarboxylate sodium coordination compounds as anodes for Na-ion batteries , 2014 .

[63]  Philipp Adelhelm,et al.  Conversion reactions for sodium-ion batteries. , 2013, Physical chemistry chemical physics : PCCP.

[64]  Haoshen Zhou,et al.  Fe2O3 nanocrystals anchored onto graphene nanosheets as the anode material for low-cost sodium-ion batteries. , 2014, Chemical communications.

[65]  Jing Zhou,et al.  Superior Electrochemical Performance and Storage Mechanism of Na3V2(PO4)3 Cathode for Room‐Temperature Sodium‐Ion Batteries , 2013 .

[66]  Dane Morgan,et al.  Li Conductivity in Li x MPO 4 ( M = Mn , Fe , Co , Ni ) Olivine Materials , 2004 .

[67]  W. Luo,et al.  Na-Ion Battery Anodes: Materials and Electrochemistry. , 2016, Accounts of chemical research.

[68]  D. Stevens,et al.  High Capacity Anode Materials for Rechargeable Sodium‐Ion Batteries , 2000 .

[69]  D Carlier,et al.  Electrochemical investigation of the P2–NaxCoO2 phase diagram. , 2011, Nature materials.

[70]  Yuesheng Wang,et al.  Amorphous monodispersed hard carbon micro-spherules derived from biomass as a high performance negative electrode material for sodium-ion batteries , 2015 .

[71]  Ya‐Xia Yin,et al.  An O3-type NaNi0.5Mn0.5O2 cathode for sodium-ion batteries with improved rate performance and cycling stability , 2016 .

[72]  F. Fauth,et al.  VIV Disproportionation Upon Sodium Extraction From Na3V2(PO4)2F3 Observed by Operando X-ray Absorption Spectroscopy and Solid-State NMR , 2017 .

[73]  Jesse S. Ko,et al.  Na2Ti3O7 Nanoplatelets and Nanosheets Derived from a Modified Exfoliation Process for Use as a High-Capacity Sodium-Ion Negative Electrode. , 2017, ACS applied materials & interfaces.

[74]  Q. Yan,et al.  Advanced Cathode Materials for Sodium-Ion Batteries: What Determines Our Choices? , 2017 .

[75]  M. Nakayama,et al.  Changes in Electronic Structure between Cobalt and Oxide Ions of Lithium Cobalt Phosphate as 4.8-V Positive Electrode Material , 2004 .

[76]  Ya‐Xia Yin,et al.  Sodium iron hexacyanoferrate with high Na content as a Na-rich cathode material for Na-ion batteries , 2014, Nano Research.

[77]  Chunsheng Wang,et al.  Graphene oxide wrapped croconic acid disodium salt for sodium ion battery electrodes , 2014 .

[78]  Haegyeom Kim,et al.  Recent Progress in Electrode Materials for Sodium‐Ion Batteries , 2016 .

[79]  A. Yamada,et al.  High-Temperature Neutron and X-ray Diffraction Study of Fast Sodium Transport in Alluaudite-type Sodium Iron Sulfate , 2016 .

[80]  G. Cui,et al.  Conjugated microporous polymers with excellent electrochemical performance for lithium and sodium storage , 2015 .

[81]  Gurpreet Singh,et al.  MoS2/graphene composite paper for sodium-ion battery electrodes. , 2014, ACS nano.

[82]  Kazuma Gotoh,et al.  NMR study for electrochemically inserted Na in hard carbon electrode of sodium ion battery , 2013 .

[83]  Koichi Yamashita,et al.  Black Phosphorus as a High-Capacity, High-Capability Negative Electrode for Sodium-Ion Batteries: Investigation of the Electrode/Electrolyte Interface , 2016 .

[84]  Hui Yan,et al.  The Surface Coating of Commercial LiFePO4 by Utilizing ZIF-8 for High Electrochemical Performance Lithium Ion Battery , 2017, Nano-micro letters.

[85]  Wenping Sun,et al.  Transition metal oxides for high performance sodium ion battery anodes , 2014 .

[86]  P. Balaya,et al.  α-MoO3: A high performance anode material for sodium-ion batteries , 2013 .

[87]  T. D. Wood,et al.  Synthesis and characterization of low molecular weight oligomers of soluble polyaniline by electrospray ionization mass spectrometry , 2004 .

[88]  S. Dacek,et al.  Explaining Performance-Limiting Mechanisms in Fluorophosphate Na-Ion Battery Cathodes through Inactive Transition-Metal Mixing and First-Principles Mobility Calculations , 2015 .

[89]  Dong-Hwa Seo,et al.  A combined first principles and experimental study on Na3V2(PO4)2F3 for rechargeable Na batteries , 2012 .

[90]  Haixia Wu,et al.  Composites of Graphene and LiFePO4 as Cathode Materials for Lithium-Ion Battery: A Mini-review , 2014, Nano-Micro Letters.

[91]  Liquan Chen,et al.  Room-temperature stationary sodium-ion batteries for large-scale electric energy storage , 2013 .

[92]  B. Hwang,et al.  The P2-Na(2/3)Co(2/3)Mn(1/3)O2 phase: structure, physical properties and electrochemical behavior as positive electrode in sodium battery. , 2011, Dalton transactions.

[93]  Shin-ichi Nishimura,et al.  A 3.8-V earth-abundant sodium battery electrode , 2014, Nature Communications.

[94]  D. Bresser,et al.  Anatase TiO2 nanoparticles for high power sodium-ion anodes , 2014 .

[95]  Huilin Pan,et al.  Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries , 2012 .

[96]  Nam-Soon Choi,et al.  Charge carriers in rechargeable batteries: Na ions vs. Li ions , 2013 .

[97]  Jean-Marie Tarascon,et al.  Na2Ti3O7: Lowest voltage ever reported oxide insertion electrode for sodium ion batteries , 2011 .

[98]  V. Ramar,et al.  A rationally designed dual role anode material for lithium-ion and sodium-ion batteries: case study of eco-friendly Fe3O4. , 2013, Physical chemistry chemical physics : PCCP.

[99]  Jun Chen,et al.  3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries , 2015 .

[100]  Anubhav Jain,et al.  Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials , 2011 .

[101]  Shinichi Komaba,et al.  P2-type Na(x)[Fe(1/2)Mn(1/2)]O2 made from earth-abundant elements for rechargeable Na batteries. , 2012, Nature materials.

[102]  Gerbrand Ceder,et al.  Challenges for Na-ion Negative Electrodes , 2011 .

[103]  Seung M. Oh,et al.  Sodium Terephthalate as an Organic Anode Material for Sodium Ion Batteries , 2012, Advanced materials.

[104]  Linyu Yang,et al.  Synthesis of coral-like Fe2N@C nanoparticles and application in sodium ion batteries as a novel anode electrode material , 2016 .

[105]  Qian Sun,et al.  Cycle performance improvement of NaCrO2 cathode by carbon coating for sodium ion batteries , 2012 .

[106]  Y. Meng,et al.  Exploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries. , 2017, Journal of the American Chemical Society.

[107]  Zhichuan J. Xu.  From Two-Phase to Three-Phase: The New Electrochemical Interface by Oxide Electrocatalysts , 2017, Nano-micro letters.

[108]  W. Tremel,et al.  Extraordinary Performance of Carbon‐Coated Anatase TiO2 as Sodium‐Ion Anode , 2015, Advanced energy materials.

[109]  Palani Balaya,et al.  The First Report on Excellent Cycling Stability and Superior Rate Capability of Na3V2(PO4)3 for Sodium Ion Batteries , 2013 .

[110]  Laure Monconduit,et al.  NiP3: a promising negative electrode for Li- and Na-ion batteries , 2014 .

[111]  Linghui Yu,et al.  Hollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries , 2012 .

[112]  D. A. D. Corte,et al.  Microsized Sn as Advanced Anodes in Glyme‐Based Electrolyte for Na‐Ion Batteries , 2016, Advanced materials.

[113]  J. Goodenough,et al.  Sn-Cu nanocomposite anodes for rechargeable sodium-ion batteries. , 2013, ACS applied materials & interfaces.

[114]  P. Adelhelm,et al.  A comparative study on the impact of different glymes and their derivatives as electrolyte solvents for graphite co-intercalation electrodes in lithium-ion and sodium-ion batteries. , 2016, Physical chemistry chemical physics : PCCP.

[115]  Jun Chen,et al.  All Organic Sodium‐Ion Batteries with Na 4 C 8 H 2 O 6 , 2014 .

[116]  L. Stievano,et al.  Facile synthesis and long cycle life of SnSb as negative electrode material for Na-ion batteries , 2013 .

[117]  Yoshio Kobayashi,et al.  Intermediate honeycomb ordering to trigger oxygen redox chemistry in layered battery electrode , 2016, Nature Communications.

[118]  Ya‐Xia Yin,et al.  Ti‐Substituted NaNi0.5Mn0.5‐xTixO2 Cathodes with Reversible O3−P3 Phase Transition for High‐Performance Sodium‐Ion Batteries , 2017, Advanced materials.

[119]  Richard Dronskowski,et al.  Transition-Metal Carbodiimides as Molecular Negative Electrode Materials for Lithium- and Sodium-Ion Batteries with Excellent Cycling Properties. , 2016, Angewandte Chemie.

[120]  Zhichuan J. Xu,et al.  β-FeOOH: An Earth-Abundant High-Capacity Negative Electrode Material for Sodium-Ion Batteries , 2015 .

[121]  P. Hagenmuller,et al.  A study of the NaxTiO2 system by electrochemical deintercalation , 1983 .

[122]  J. Choi,et al.  Anomalous manganese activation of a pyrophosphate cathode in sodium ion batteries: a combined experimental and theoretical study. , 2013, Journal of the American Chemical Society.

[123]  R. Cava,et al.  Sodium ion ordering in NaxCoO2: Electron diffraction study , 2004 .

[124]  Kai He,et al.  Expanded graphite as superior anode for sodium-ion batteries , 2014, Nature Communications.

[125]  Zonghai Chen,et al.  Nanostructured Black Phosphorus/Ketjenblack-Multiwalled Carbon Nanotubes Composite as High Performance Anode Material for Sodium-Ion Batteries. , 2016, Nano letters.

[126]  Anna M. Wise,et al.  P2–NaxCoyMn1–yO2 (y = 0, 0.1) as Cathode Materials in Sodium-Ion Batteries—Effects of Doping and Morphology To Enhance Cycling Stability , 2016 .

[127]  M. Jaroniec,et al.  Na2Ti3O7@N‐Doped Carbon Hollow Spheres for Sodium‐Ion Batteries with Excellent Rate Performance , 2017, Advanced materials.

[128]  J. Tarascon,et al.  The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries , 2016 .

[129]  Yong Lei,et al.  Extended π-conjugated system for fast-charge and -discharge sodium-ion batteries. , 2015, Journal of the American Chemical Society.

[130]  J. Dahn,et al.  NaCrO2 is a Fundamentally Safe Positive Electrode Material for Sodium-Ion Batteries with Liquid Electrolytes , 2012 .

[131]  P. Hagenmuller,et al.  Electrochemical intercalation of sodium in NaxCoO2 bronzes , 1981 .

[132]  J. Tarascon,et al.  Sustainability and in situ monitoring in battery development. , 2016, Nature materials.

[133]  Yuesheng Wang,et al.  P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries , 2015, Nature Communications.

[134]  Wei Wang,et al.  High capacity, reversible alloying reactions in SnSb/C nanocomposites for Na-ion battery applications. , 2012, Chemical communications.

[135]  Yan Yu,et al.  Superior Sodium Storage in Na2Ti3O7 Nanotube Arrays through Surface Engineering , 2016 .

[136]  Yan Yu,et al.  Tiny Li4Ti5O12 nanoparticles embedded in carbon nanofibers as high-capacity and long-life anode materials for both Li-ion and Na-ion batteries. , 2013, Physical chemistry chemical physics : PCCP.

[137]  Philipp Adelhelm,et al.  Use of graphite as a highly reversible electrode with superior cycle life for sodium-ion batteries by making use of co-intercalation phenomena. , 2014, Angewandte Chemie.

[138]  Motoaki Nishijima,et al.  Rhombohedral prussian white as cathode for rechargeable sodium-ion batteries. , 2015, Journal of the American Chemical Society.

[139]  Junmei Zhao,et al.  Disodium Terephthalate (Na2C8H4O4) as High Performance Anode Material for Low‐Cost Room‐Temperature Sodium‐Ion Battery , 2012 .

[140]  J. Tarascon,et al.  Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries , 2015, Science.

[141]  C. Delmas,et al.  P2-Na(x)VO2 system as electrodes for batteries and electron-correlated materials. , 2013, Nature materials.

[142]  Yong-Sheng Hu,et al.  Pitch-derived amorphous carbon as high performance anode for sodium-ion batteries , 2016 .

[143]  S. Dou,et al.  Sn4+xP3 @ Amorphous Sn‐P Composites as Anodes for Sodium‐Ion Batteries with Low Cost, High Capacity, Long Life, and Superior Rate Capability , 2014, Advanced materials.

[144]  Xiqian Yu,et al.  A size-dependent sodium storage mechanism in Li4Ti5O12 investigated by a novel characterization technique combining in situ X-ray diffraction and chemical sodiation. , 2013, Nano letters.

[145]  Teófilo Rojo,et al.  Na-ion batteries, recent advances and present challenges to become low cost energy storage systems , 2012 .

[146]  Chenglong Zhao,et al.  Novel Methods for Sodium-Ion Battery Materials , 2017 .

[147]  Fredrik J. Lindgren,et al.  Towards more sustainable negative electrodes in Na-ion batteries via nanostructured iron oxide , 2014 .

[148]  P. Bruce,et al.  Rate Dependent Performance Related to Crystal Structure Evolution of Na0.67Mn0.8Mg0.2O2 in a Sodium-Ion Battery , 2015 .

[149]  Guoxiu Wang,et al.  Ultrathin MoS2 Nanosheets as Anode Materials for Sodium‐Ion Batteries with Superior Performance , 2015 .

[150]  Haegyeom Kim,et al.  Understanding the Electrochemical Mechanism of the New Iron-Based Mixed-Phosphate Na4Fe3(PO4)2(P2O7) in a Na Rechargeable Battery , 2013 .

[151]  Jun Liu,et al.  Uniform yolk–shell Sn4P3@C nanospheres as high-capacity and cycle-stable anode materials for sodium-ion batteries , 2015 .

[152]  Donghan Kim,et al.  Enabling Sodium Batteries Using Lithium‐Substituted Sodium Layered Transition Metal Oxide Cathodes , 2011 .

[153]  J. Goodenough,et al.  Li3N as a Cathode Additive for High‐Energy‐Density Lithium‐Ion Batteries , 2016 .

[154]  Sodium Ion Diffusion and Voltage Trends in Phosphates Na4M3(PO4)2P2O7 (M = Fe, Mn, Co, Ni) for Possible High-Rate Cathodes , 2015 .

[155]  Yuki Yamada,et al.  Na2FeP2O7: A Safe Cathode for Rechargeable Sodium-ion Batteries , 2013 .

[156]  Haoshen Zhou,et al.  Aromatic porous-honeycomb electrodes for a sodium-organic energy storage device , 2013, Nature Communications.

[157]  M. Armand,et al.  Building better batteries , 2008, Nature.

[158]  Pedro Lavela,et al.  NiCo2O4 Spinel: First Report on a Transition Metal Oxide for the Negative Electrode of Sodium-Ion Batteries , 2002 .

[159]  Tao Zheng,et al.  Mechanisms for Lithium Insertion in Carbonaceous Materials , 1995, Science.

[160]  Seung M. Oh,et al.  An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries , 2013, Advanced materials.

[161]  William A. Goddard,et al.  Unexpected discovery of low-cost maricite NaFePO4 as a high-performance electrode for Na-ion batteries , 2015 .

[162]  Huilin Pan,et al.  Spinel lithium titanate (Li4Ti5O12) as novel anode material for room-temperature sodium-ion battery , 2012 .

[163]  P. Bruce,et al.  Nanostructured materials for advanced energy conversion and storage devices , 2005, Nature materials.

[164]  J-M Tarascon,et al.  Study of the insertion/deinsertion mechanism of sodium into Na0.44MnO2. , 2007, Inorganic chemistry.

[165]  Yuesheng Wang,et al.  Ti-substituted tunnel-type Na0.44MnO2 oxide as a negative electrode for aqueous sodium-ion batteries , 2015, Nature Communications.