Structure-Reconfiguring Robots: Autonomous Truss Reconfiguration and Manipulation

In this article, we present a robot capable of autonomously traversing and manipulating a three-dimensional (3-D) truss structure. The robot can approach and traverse multiple structural joints using a combination of translational and rotational motions. A key factor in allowing reliable motion and engagement is the use of specially designed structural building blocks comprised of bidirectional geared rods. A set of traversal plans, each comprised of basic motion primitives, were analyzed for speed, robustness, and repeatability. Paths covering eight joints are demonstrated, as well as automatic element assembly and disassembly. We suggest that the robot architecture and truss module design, such as the one presented here, could open the door to robotically assembled, maintained, and reconfigured structures that would ordinarily be difficult, risky, or time consuming for humans to construct.

[1]  Roger D. Quinn,et al.  Mini-Whegs TM Climbs Steep Surfaces Using Insect-inspired Attachment Mechanisms , 2009, Int. J. Robotics Res..

[2]  Daniela Rus,et al.  Navigating 3D steel web structures with an inchworm robot , 1996, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS '96.

[3]  Mark R. Cutkosky,et al.  Biologically inspired climbing with a hexapedal robot , 2008, J. Field Robotics.

[4]  Stewart Sherrit,et al.  Lemur IIb: a robotic system for steep terrain access , 2006, Ind. Robot.

[5]  Jian Zhu,et al.  A visual sensing application to a climbing cleaning robot on the glass surface , 2004 .

[6]  B. Bridge,et al.  CLIMBING RING ROBOT FOR INSPECTION OF OFFSHORE WIND TURBINES , 2008 .

[7]  Jason Jianjun Gu,et al.  A Wall Climbing Robot for Oil Tank Inspection , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[8]  Sarjoun Skaff,et al.  Skyworker: Robotics for Space Assembly, Inspection and Maintenance , 2001 .

[9]  Marsette Vona,et al.  Self-assembling mobile linkages , 2007, IEEE Robotics & Automation Magazine.

[10]  Mark A. Minor,et al.  Design, Modeling, Control, and Evaluation of a Hybrid Hip Joint Miniature Climbing Robot , 2005, Int. J. Robotics Res..

[11]  Mark Yim,et al.  Factory floor: A robotically reconfigurable construction platform , 2010, 2010 IEEE International Conference on Robotics and Automation.

[12]  Ali Marjovi,et al.  3DCLIMBER: A climbing robot for inspection of 3D human made structures , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[13]  Karsten Berns,et al.  CROMSCI: development of a climbing robot with negative pressure adhesion for inspections , 2008, Ind. Robot.

[14]  Kostas Hrissagis,et al.  On the development of a modular external-pipe crawling omni-directional mobile robot , 2006, Ind. Robot.

[15]  Yuzuru Terada,et al.  Automatic Modular Assembly System and its Distributed Control , 2008, Int. J. Robotics Res..

[16]  Richard Alexander,et al.  A Mobile Climbing Robot for High Precision Manufacture and Inspection of Aerostructures , 2005, Int. J. Robotics Res..

[17]  Roque J. Saltarén,et al.  A climbing parallel robot: a robot to climb along tubular and metallic structures , 2006, IEEE Robotics & Automation Magazine.

[18]  Carlos Balaguer,et al.  ROMA robots for inspection of steel based infrastructures , 2002 .

[19]  Shuguo Wang,et al.  A wheel-leg hybrid wall climbing robot with multi-surface locomotion ability , 2008, 2008 IEEE International Conference on Mechatronics and Automation.

[20]  I-Ming Chen,et al.  Locomotion of a Two-Dimensional Walking-Climbing Robot Using A Closed-Loop Mechanism: From Gait Generation to Navigation , 2003, Int. J. Robotics Res..

[21]  Gabriel Jacob Goldman.  Design Space and Motion Development for a Pole Climbing Serpentine Robot Featuring Actuated Universal Joints , 2009 .

[22]  David Hjelle.  Toward Machine Metabolism: Design Of A Truss Reconfiguring Robot , 2009 .

[23]  Mark A. Minor,et al.  Under-Actuated Kinematic Structures for Miniature Climbing Robots , 2003 .

[24]  Roque Saltaren,et al.  A climbing parallel robot , 2006 .

[25]  W. Doggett,et al.  Robotic assembly of truss structures for space systems and future research plans , 2002, Proceedings, IEEE Aerospace Conference.

[26]  Gholamreza Vossoughi,et al.  A hybrid pole climbing and manipulating robot with minimum DOFs for construction and service applications , 2005, Ind. Robot.

[27]  Daniela Rus,et al.  Optimal self assembly of modular manipulators with active and passive modules , 2008, 2008 IEEE International Conference on Robotics and Automation.

[28]  Daniela Rus,et al.  Self assembly of modular manipulators with active and passive modules , 2008, ICRA.

[29]  Roland Siegwart,et al.  Magnebike: A magnetic wheeled robot with high mobility for inspecting complex‐shaped structures , 2009, J. Field Robotics.

[30]  Jizhong Xiao,et al.  City-Climbers at Work , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.