Molten salt synthesis of in-situ TiC coating on graphite flakes

[1]  Ho Won Jang,et al.  Microstructural, mechanical and friction properties of nano-graphite and h-BN added TiC-based composites , 2020 .

[2]  Mehdi Shahedi Asl,et al.  Effects of SiC content on thermal shock behavior and elastic modulus of cordierite–mullite composites , 2020 .

[3]  M. G. Kakroudi,et al.  Synthesis and characterization of MgAl2O4 spinel precursor sol prepared by inorganic salts , 2020 .

[4]  Mehdi Shahedi Asl,et al.  Toughening of ZrB2-based composites with in-situ synthesized ZrC from ZrO2 and graphite precursors , 2020 .

[5]  M. G. Kakroudi,et al.  Characterization of Ni-doped pyrolyzed phenolic resin and its addition to the Al2O3–C refractories , 2020 .

[6]  Mehdi Shahedi Asl,et al.  Characterization of hot-pressed Ti3SiC2–SiC composites , 2020 .

[7]  Seyed Ali Delbari,et al.  Beneficial role of carbon black on the properties of TiC ceramics , 2020 .

[8]  Mehdi Shahedi Asl,et al.  Densification and toughening mechanisms in spark plasma sintered ZrB2-based composites with zirconium and graphite additives , 2020 .

[9]  Mehdi Shahedi Asl,et al.  Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites , 2020 .

[10]  Mehdi Shahedi Asl,et al.  Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers , 2020 .

[11]  M. G. Kakroudi,et al.  Properties of alumina sol prepared via inorganic route , 2020 .

[12]  Mehdi Shahedi Asl,et al.  Advantages and disadvantages of graphite addition on the characteristics of hot-pressed ZrB2–SiC composites , 2020 .

[13]  Mehdi Shahedi Asl,et al.  Numerical modeling of heat transfer during spark plasma sintering of titanium carbide , 2020 .

[14]  Mehdi Shahedi Asl,et al.  Pressureless sintering of ZrB2 ceramics codoped with TiC and graphite , 2019, International Journal of Refractory Metals and Hard Materials.

[15]  Mehdi Shahedi Asl,et al.  Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC , 2019, Ceramics International.

[16]  M. Fang,et al.  Preparation of Al2O3–SiC composite powder from kyanite tailings via carbothermal reduction process , 2018 .

[17]  G. Qiao,et al.  Molten salt synthesis of continuous tungsten carbide coatings on graphite flakes , 2017 .

[18]  Chao Yu,et al.  Low-temperature synthesis of nanocrystalline ZrC coatings on flake graphite by molten salts , 2017 .

[19]  F. Sun,et al.  Consecutive deposition of amorphous SiO2 interlayer and diamond film on graphite by chemical vapor deposition , 2017 .

[20]  A. Nemati,et al.  Molten salt synthesis of a SiC coating on graphite flakes for application in refractory castables , 2016 .

[21]  Guangqiang Li,et al.  Preparation and characterisation of porous biomorphic SiC/C ceramic from molten salt , 2015 .

[22]  Mehdi Shahedi Asl,et al.  Influence of graphite nano-flakes on densification and mechanical properties of hot-pressed ZrB2–SiC composite , 2015 .

[23]  Guangya Hou,et al.  Preparation of biomorphic silicon carbide–mullite ceramics using molten salt synthesis , 2014 .

[24]  Chang-rui Zhang,et al.  Short communication Synthesis and characterization of nanostructured silicon carbide crystal whiskers by sol-gel process and carbothermal reduction , 2014 .

[25]  C. Deng,et al.  Novel synthesis and characterization of silicon carbide nanowires on graphite flakes , 2014 .

[26]  M. Fang,et al.  Synthesis of SiC nanowires by thermal evaporation method without catalyst assistant , 2013 .

[27]  I. Biswas,et al.  Nanostructured cementitious sol gel coating on graphite for application in monolithic refractory composites , 2012 .

[28]  Shaowei Zhang,et al.  Molten Salt Synthesis and Characterization of Titanium Carbide-Coated Graphite Flakes for Refractory Castable Applications , 2011 .

[29]  S. Dutta,et al.  Development of mullite and spinel coatings on graphite for improved water-wettability and oxidation resistance , 2010 .

[30]  Marc Huger,et al.  Influence of the thermal history on the mechanical properties of two alumina based castables , 2009 .

[31]  S. Mukhopadhyay,et al.  Spinel‐Coated Graphite for Carbon Containing Refractory Castables , 2009 .

[32]  T. Chotard,et al.  Damage evaluation of two alumina refractory castables , 2009 .

[33]  Suat Yilmaz,et al.  Synthesis and characterization of boehmitic alumina coated graphite by sol-gel method , 2009 .

[34]  T. Gerdes,et al.  Development of MgAl2O4 spinel coating on graphite surface to improve its water-wettability and oxidation resistance , 2009 .

[35]  X. Liu,et al.  Low‐Temperature Preparation of Titanium Carbide Coatings on Graphite Flakes from Molten Salts , 2008 .

[36]  T. Gerdes,et al.  Improving the quality of nanocrystalline MgAl2O4 spinel coating on graphite by a prior oxidation treatment on the graphite surface , 2008 .

[37]  Shaoyong Zhang Next Generation Carbon-Containing Refractory Composites , 2006 .

[38]  D. Agrawal,et al.  Development of Titanium Coatings on Particulate Diamond , 2004 .

[39]  V. Pandolfelli,et al.  Dispersion and setting of Al2O3-SiC-SiO2-C ULC refractory castables , 2004 .

[40]  William E Lee,et al.  Improving the water-wettability and oxidation resistance of graphite using Al2O3/SiO2 sol-gel coatings , 2003 .

[41]  V. Pandolfelli,et al.  High-carbon-content: Refractory castables , 2003 .

[42]  Liu Liehua,et al.  The refractories industry: Worldwide and China , 2003 .

[43]  Shaowei Zhang,et al.  Carbon containing castables: current status and future prospects , 2002 .

[44]  V. Pandolfelli,et al.  Zero-cement refractory castables , 2002 .

[45]  M. Rigaud,et al.  Alumina art magnesia-based castables containing graphite: Comparison , 2002 .

[46]  Jung hwan Kim,et al.  Preparation of ZrO2 coated graphite powders , 2000 .

[47]  Jingkun Yu,et al.  Improvement in flowability, oxidation resistance and water wettability of graphite powders by TiO2 coating , 1996 .

[48]  Fujiwara Seiji,et al.  Wettability by Water and Oxidation Resistance of Alumina-Coated Graphite Powder , 1995 .

[49]  H. H. Kellogg,et al.  THE EQUILIBRIUM BETWEEN TITANIUM METAL, TiCl$sub 2$, AND TiCl$sub 3$ IN NaCl-KCl MELTS , 1957 .

[50]  M. Straumanis,et al.  The Mechanism of Deposition of Titanium Coatings from Fused Salt Baths , 1957 .