On the importance of electromagnetic models in RFIC design

Proper inclusion of EM analysis in the design flow of RF integrated circuits (RFIC) proves to be essential in avoiding costly re-spins, reducing both design cost and time-to-market. However, EM modeling and simulation is not straight-forward, due to the nature and complexity of the EM analysis, as well as the relative immaturity of the methodology and integration of appropriate tools in traditional IC design flow. The aim of this paper is to assist the RFIC designer in the area of EM simulation, first with presenting some modeling and simulation issues that are of importance for successful design, followed by a set of design examples presented from an EM perspective, illustrating problems, possible solution, and emphasizing the importance of EM modeling and simulation in modern RFIC design.

[1]  W. Heinrich,et al.  Theory and measurements of flip-chip interconnects for frequencies up to 100 GHz , 2001 .

[2]  Sean S. Cahill,et al.  Low-Cost High-Bandwidth Millimeter Wave Leadframe Packages , 2010 .

[3]  T. P. Budka,et al.  Wide-bandwidth millimeter-wave bond-wire interconnects , 2001 .

[4]  Bodhisatwa Sadhu,et al.  Capacitor bank design for wide tuning range LC VCOs: 850MHz-7.1GHz (157%) , 2010, Proceedings of 2010 IEEE International Symposium on Circuits and Systems.

[5]  Milan Savic,et al.  Wide-bandwidth 60 GHz differential LNA in SiGe:C technology , 2010, Proceedings of Papers 5th European Conference on Circuits and Systems for Communications (ECCSC'10).

[6]  J.C. Rautio,et al.  A potentially significant on-wafer high-frequency measurement calibration error , 2005, IEEE Microwave Magazine.

[7]  R. Levy.  Explicit formulas for Chebyshev impedance-matching networks, filters and interstages , 1964 .

[8]  Bradley K. Alpert,et al.  Causality and waveguide circuit theory , 2001 .

[9]  Francesco Svelto,et al.  Design of Low-Loss Transmission Lines in Scaled CMOS by Accurate Electromagnetic Simulations , 2009, IEEE Journal of Solid-State Circuits.

[10]  A. R. Djordjević.  LINPAR for Windows : matrix parameters for multiconductor transmission lines : software and user's manual, version 2.0 , 1999 .

[11]  H.C. de Graaff,et al.  Microwave modelling and measurement of the self- and mutual inductance of coupled bondwires , 1997, Proceedings of the 1997 Bipolar/BiCMOS Circuits and Technology Meeting.

[12]  Raviraj S. Adve,et al.  Interpolation/extrapolation of frequency domain responses using the Hilbert transform , 1996 .

[13]  Duane S. Boning,et al.  PATTERN AND PROCESS DEPENDENCIES IN COPPER DAMASCENE CHEMICAL MECHANICAL POLISHING PROCESSES , 1998 .

[14]  Lazar Saranovac,et al.  Design of monolithic microwave integrated circuits for 60 GHz Band , 2014, 2014 22nd Telecommunications Forum Telfor (TELFOR).

[15]  M. Seo,et al.  A 150 GHz Amplifier With 8 dB Gain and 6 dBm in Digital 65 nm CMOS Using Dummy-Prefilled Microstrip Lines , 2009 .

[17]  Ali M. Niknejad,et al.  mm-Wave Silicon Technology: 60 GHz and Beyond , 2008 .

[18]  H. Onodera,et al.  Analytical Estimation of Interconnect Loss Due to Dummy Fills , 2006, 2006 IEEE Electrical Performane of Electronic Packaging.

[19]  Ali Hajimiri,et al.  Concepts and methods in optimization of integrated LC VCOs , 2001, IEEE J. Solid State Circuits.

[20]  R. Fano.  Theoretical limitations on the broadband matching of arbitrary impedances , 1950 .

[21]  Lazar Saranovac,et al.  Broadband power amplifier limitations due to package parasitics , 2015 .

[22]  H. Onodera,et al.  Effect of Dummy Fills on High-Frequency Characteristics of On-Chip Interconnects , 2006, 2006 IEEE Workship on Signal Propagation on Interconnects.

[23]  H. Onodera,et al.  Measurement of interconnect loss due to dummy fills , 2007, 2007 IEEE Workshop on Signal Propagation on Interconnects.

[24]  A. E. Ruehii.  Inductance Calculations in a Complex Integrated Circuit Environment , 2002 .

[25]  Antonije R. Dordevic,et al.  Causality of circuit and electromagnetic-field models , 2010, Proceedings of Papers 5th European Conference on Circuits and Systems for Communications (ECCSC'10).

[26]  T.K. Sarkar,et al.  Interpolation/extrapolation of frequency domain responses using the Hilbert transform , 1995, Proceedings of ISSE'95 - International Symposium on Signals, Systems and Electronics.

[27]  Andrew B. Kahng,et al.  Nano-CMOS Design for Manufacturability: Robust Circuit and Physical Design for Sub-65nm Technology Nodes , 2008 .

[28]  James C. Rautio,et al.  A de-embedding algorithm for electromagnetics , 1991 .

[29]  H. Jantunen,et al.  Low-Loss and Wideband Package Transitions for Microwave and Millimeter-Wave MCMs , 2008, IEEE Transactions on Advanced Packaging.

[30]  Frederick W. King.  Efficient numerical approach to the evaluation of Kramers–Kronig transforms , 2002 .

[31]  A.M. Niknejad,et al.  Modeling of passive elements with ASITIC , 2002, 2002 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium. Digest of Papers (Cat. No.02CH37280).

[32]  V. Krozer,et al.  EM simulation accuracy enhancement for broadband modeling of on-wafer passive components , 2007, 2007 European Microwave Integrated Circuit Conference.

[33]  D. Boning,et al.  The physical and electrical effects of metal-fill patterning practices for oxide chemical-mechanical polishing processes , 1998 .

[34]  Jae-Sung Rieh,et al.  RF characterization and modeling of various wire bond transitions , 2005, IEEE Transactions on Advanced Packaging.