The Effect of the Chemical Composition to the End-Properties of Ceramic Dispersed Strengthened 316 L / Y 2 O 3 Composites

In this paper the influence of chemical composition to the end-properties of ceramic dispersed strengthened 316L/Y2O3 composites ceramic has been studied. Two various compositions were studied and compared to reference 316L sintered sample. These two compositions are 316L/0.33 wt% Y2O3 and 316L/1 wt% Y2O3. The high-efficient attrition milling has been used for grain size reduction and oxide distribution in the austenitic matrices. Spark Plasma Sintering (SPS) was used as fast compaction method of the milled powders in order to avoid excessive grain growth. In this work it was found that changing the chemical composition by increase of the Y2O3 addition in the composite matrix improves the milling efficiency, increases the hardness of the 316L and reduces significantly the wear rate.

[1]  N. Sai,et al.  Effect of Y2O3 addition and cooling rate on mechanical properties of Fe-24Cr-20Ni-2Mn steels by powder metallurgy route , 2018, Composites Communications.

[2]  S. Grasso,et al.  Flash spark plasma sintering of HfB2 ceramics without pre-sintering , 2018, Scripta Materialia.

[3]  V. Senthilkumar,et al.  Densification and microstructural evolution of spark plasma sintered NiTi shape memory alloy , 2018, Advanced Powder Technology.

[4]  J. Krogstad,et al.  Microstructural and compositional effects of transition metal carbide additions on dispersion-strengthened tungsten fabricated via spark plasma sintering , 2018, International Journal of Refractory Metals and Hard Materials.

[5]  A. Krishna,et al.  Effect of Y2O3 and ZrO2 on the microstructure and mechanical properties of nano-ODS 21Cr-9Mn-6Ni steels , 2018, Materiali in tehnologije.

[6]  Mehdi Shahedi Asl,et al.  Microstructural investigation of spark plasma sintered TiB2 ceramics with Si3N4 addition , 2018, Ceramics International.

[7]  G. Nolas,et al.  Enhanced thermoelectric properties of polymer/inorganic bulk composites through EG treatment and spark plasma sintering processing , 2018, Scripta Materialia.

[8]  C. Balázsi,et al.  EFFECT OF THE α-Si 3 N 4 ADDITION ON THE TRIBOLOGICAL PROPERTIES OF 316 L STAINLESS STEEL PREPARED BY ATTRITION MILLING AND SPARK PLASMA SINTERING , 2018 .

[9]  Á. Horváth,et al.  Effect of Si3N4 addition on the morphological and structural properties of the 316L stainless steel for nuclear applications , 2017 .

[10]  M.F.C. Ordoñez,et al.  High-temperature oxidation of sintered austenitic stainless steel containing boron or yttria , 2017 .

[11]  Yun-Hee Lee,et al.  Hydrogen susceptibility of nano-sized oxide dispersed austenitic steel for fusion reactor , 2017 .

[12]  Li Weizhou,et al.  Effect of Y 2 O 3 contents on oxidation resistance at 1150 °C and mechanical properties at room temperature of ODS Ni-20Cr-5Al alloy , 2016 .

[13]  W. Ge,et al.  Hot rolling and annealing effects on the microstructure and mechanical properties of ODS austenitic steel fabricated by electron beam selective melting , 2016, Frontiers of Materials Science.

[14]  D. Agrawal,et al.  Effect of heating mode and Y2O3 addition on electrochemical response on austenitic and ferritic stainless steels , 2015 .

[15]  C. Davis,et al.  Elaboration of ZrC-SiC composites by spark plasma sintering using polymer-derived ceramics , 2014 .

[16]  I. Kuběna,et al.  Small fatigue crack propagation in Y2O3 strengthened steels , 2014 .

[17]  Q. Guo,et al.  Joining of 316L stainless steel by using spark plasma sintering method , 2013 .

[18]  S. Mullens,et al.  Nano-yttria dispersed stainless steel composites composed by the 3 dimensional fiber deposition technique , 2012 .

[19]  Á. Horváth,et al.  Preparation and structural investigation of nanostructured oxide dispersed strengthened steels , 2011, Journal of Materials Science.

[20]  A. Almazouzi,et al.  Development of oxides dispersion strengthened steels for high temperature nuclear reactor applications , 2009 .

[21]  A. Möslang,et al.  Mechanical and microstructural properties of a hipped RAFM ODS-steel , 2002 .