RFID: A Bibliographical Literature Review with Future Research Directions

The purpose of this article is to review some of the most prominent applications of RFID in industries and to provide a comprehensive review of the work done from 1985 through 2012 and the research trend on that. The effectiveness of RFID and the challenges facing with are also discussed. Some applications of radio frequency identification in supply chain are briefly discussed. Articles are classified by the year of publications and each case is discussed very briefly. To obtain a good understanding of the level of the researches completed up to the end of 2012 a table and graph are used to demonstrate the summary of results. In this research, author came up with 550 articles on RFID as all are listed in a single table. The findings point to this fact that research on RFID has started to pick up on year 2002 with 16 publications and then reached to its pick at year 2005 with 112 publications, and then trend went down to 42 and then up to 66 publications for years 2006 and 2007, respectively.

[1]  Edward J. Jaselskis,et al.  Implementing Radio Frequency Identification in the Construction Process , 2003 .

[2]  Yahia Zare Mehrjerdi,et al.  RFID‐enabled healthcare systems: risk‐benefit analysis , 2010 .

[3]  Yahia Zare Mehrjerdi,et al.  Excellent supply chain management , 2009 .

[4]  Minghe Yu,et al.  An RFID electronic tag based automatic vehicle identification system for traffic iot applications , 2011, 2011 Chinese Control and Decision Conference (CCDC).

[5]  Martyn Mallick Mobile and Wireless Design Essentials , 2003 .

[6]  David Hillier,et al.  Radio frequency identification and food retailing in the UK , 2005 .

[7]  G. Scott Erickson,et al.  RFID tags: commercial applications v. privacy rights , 2005, Ind. Manag. Data Syst..

[8]  Charles T. Jahren,et al.  RADIO-FREQUENCY IDENTIFICATION APPLICATIONS IN CONSTRUCTION INDUSTRY , 1995 .

[9]  Peter D. DeVries The state of RFID for effective baggage tracking in the airline industry , 2008, Int. J. Mob. Commun..

[10]  ChiaCheng Chao,et al.  Determining technology trends and forecasts of RFID by a historical review and bibliometric analysis from 1991 to 2005 , 2007 .

[11]  Markku Kivikoski,et al.  Radio Frequency Technology for Automated Manufacturing and Logistics Control. Part 1: Passive RFID Systems and the Effects of Antenna Parameters on Operational Distance , 2003 .

[12]  George Adams,et al.  Pharmaceutical manufacturing: RFID – reducing errors and effort , 2007 .

[13]  Ari Juels,et al.  "Yoking-proofs" for RFID tags , 2004, IEEE Annual Conference on Pervasive Computing and Communications Workshops, 2004. Proceedings of the Second.

[14]  M. Lee NANOPOWER RFID RECEIVER YIELDS HIGH SENSITIVITY , 1999 .

[15]  Meg McGinity RFID: is this game of tag fair play? , 2004 .

[16]  Aditya Sharma,et al.  Strategic and Institutional Perspectives in the Adoption and Early Integration of Radio Frequency Identification (RFID) , 2007, 2007 40th Annual Hawaii International Conference on System Sciences (HICSS'07).

[17]  Heather A. Smith,et al.  Developments in Practice X: Radio Frequency Identification (RFID) - An Internet for Physical Objects , 2003, Commun. Assoc. Inf. Syst..

[18]  Samuel Fosso Wamba,et al.  Unpacking the RFID Investment Decision , 2010, Proceedings of the IEEE.

[19]  Florian Michahelles,et al.  An overview of EPC technology , 2006 .

[20]  Ning Wang,et al.  Review: Wireless sensors in agriculture and food industry-Recent development and future perspective , 2006 .

[21]  Yannick Deville,et al.  Multi-tag radio-frequency identification systems based on new blind source separation neural networks , 2002, Neurocomputing.

[22]  Paul G. Ranky An introduction to radio frequency identification (RFID) methods and solutions , 2006 .

[23]  D W STEPHENS,et al.  HELP WANTED. , 1965, Oral hygiene.

[24]  Ygal Bendavid,et al.  RFID technology and the EPC network as enablers of mobile business: a case study in a retail supply chain , 2006, Int. J. Netw. Virtual Organisations.

[25]  Cabria,et al.  A PHEMT frequency doubling active antenna with BPSK modulation capability , 2004, IEEE Antennas and Wireless Propagation Letters.

[26]  Chin-Ling Chen,et al.  Using RFID Yoking Proof Protocol to Enhance Inpatient Medication Safety , 2012, Journal of Medical Systems.

[27]  Rick Huhn,et al.  Security Standards for the RFID Market , 2005, IEEE Secur. Priv..

[28]  Sung-Lin Chen,et al.  A Miniature RFID Tag Antenna Design for Metallic Objects Application , 2009, IEEE Antennas and Wireless Propagation Letters.

[29]  Martin Palmer Using RFID to Transform Essex Libraries , 2006 .

[30]  Yahia Zare Mehrjerdi RFID: the big player in the libraries of the future , 2011, Electron. Libr..

[31]  Yung-Chia Chang,et al.  Cost-Benefit Analysis of RFID Application in Apparel Retailing for SME: A Case from Taiwan , 2010, Transportation Journal.

[32]  J. Tautz,et al.  Automatic life-long monitoring of individual insect behaviour now possible. , 2003, Zoology.

[33]  Jonathan May,et al.  RFID and Corporate Responsibility: Hidden Costs in RFID Implementation , 2006 .

[34]  Alex P. J. Hum Fabric area network - a new wireless communications infrastructure to enable ubiquitous networking and sensing on intelligent clothing , 2001, Comput. Networks.

[35]  Yen-Chun Jim Wu,et al.  RFID application in a CVS Distribution Centre in Taiwan: a simulation study , 2007, Int. J. Manuf. Technol. Manag..

[36]  Chimay J. Anumba,et al.  Radio-Frequency Identification (RFID) applications: A brief introduction , 2007, Adv. Eng. Informatics.

[37]  David C. Wyld,et al.  Where is my suitcase? RFID and airline customer service , 2005 .

[38]  de Ag Ton Kok,et al.  A break-even analysis of RFID technology for inventory sensitive to shrinkage , 2008 .

[39]  E. Ngai,et al.  Development of an RFID-based sushi management system : the case of a conveyor-belt sushi restaurant , 2008 .

[40]  Yves Dallery,et al.  Ensuring supply chain safety through time temperature integrators , 2007 .

[41]  Alan D. Smith,et al.  Exploring radio frequency identification technology and its impact on business systems , 2005, Inf. Manag. Comput. Security.

[42]  Joshua R. Smith,et al.  Battery-free wireless identification and sensing , 2005, IEEE Pervasive Computing.

[43]  Kuldeep Kumar,et al.  Technology for supporting supply chain management: introduction , 2001, CACM.

[44]  Beverly Leeds,et al.  Would you like Chips with that , 2003 .

[45]  Daniel W. Engels,et al.  Radio Frequency Identification Systems in Supply Chain Management , 2004, Int. J. Robotics Autom..

[46]  Robin G. Qiu,et al.  RFID-enabled automation in support of factory integration , 2007 .

[47]  Ari Juels,et al.  RFID security and privacy: a research survey , 2006, IEEE Journal on Selected Areas in Communications.

[48]  Grossi Luigi,et al.  RFID Technologies: Emerging Issues, Challenges and Policy Options , 2007 .

[49]  Fan-Yun Pai,et al.  Evaluating the business value of RFID: Evidence from five case studies , 2008 .

[50]  Yu Min Wang,et al.  Understanding the determinants of RFID adoption in the manufacturing industry , 2010 .

[51]  K. Mark Weaver,et al.  EXPLORATION, EXPLOITATION AND SATISFACTION IN SUPPLY CHAIN PORTFOLIO STRATEGY , 2007 .

[52]  Burcu Akinci,et al.  Tracking and locating components in a precast storage yard utilizing radio frequency identification technology and GPS , 2007 .

[53]  Rebecca Angeles,et al.  Rfid Technologies: Supply-Chain Applications and Implementation Issues , 2004, Inf. Syst. Manag..

[54]  Mukunth Venkatesan,et al.  Leveraging radio frequency identification (RFID) technology to improve laboratory information management , 2004 .

[55]  Han-Chieh Chao,et al.  Integrated residential gateway: easy IA management with P2P community using RFID , 2005, IEEE Transactions on Consumer Electronics.

[56]  Annett Baier,et al.  Microwave Homodyne Systems , 2016 .

[57]  László Monostori,et al.  A survey of applications and requirements of unique identification systems and RFID techniques , 2011, Comput. Ind..

[58]  Eduardo Pinheiro Gondim de Vasconcellos,et al.  The Adoption of New Technology: Conceptual Model and Application , 2010 .

[59]  Henry C. W. Lau,et al.  Design and development of logistics workflow systems for demand management with RFID , 2011, Expert Syst. Appl..

[60]  Varpu Uotila,et al.  Space management in a DIY store analysing consumer shopping paths with data‐tracking devices , 2007 .

[61]  Torin Monahan,et al.  Tracking the social dimensions of RFID systems in hospitals , 2008, Int. J. Medical Informatics.

[62]  Karen Ka-Leung Moon,et al.  RFID research: An academic literature review (1995–2005) and future research directions , 2008 .

[63]  Yahia Zare Mehrjerdi,et al.  RFID‐enabled systems: a brief review , 2008 .

[64]  Jung P. Shim,et al.  An exploratory study of radio frequency identification (RFID) adoption in the healthcare industry , 2007, Eur. J. Inf. Syst..

[65]  Xiuli Qu,et al.  A model for quantifying the value of RFID-enabled equipment tracking in hospitals , 2011, Adv. Eng. Informatics.

[66]  A. Rizzi,et al.  Economical assessment of the impact of RFID technology and EPC system on the fast-moving consumer goods supply chain , 2008 .

[67]  Calvin D. Perry,et al.  A real-time wireless smart sensor array for scheduling irrigation , 2008 .

[68]  Holger Ziekow,et al.  RFID in Manufacturing: From Shop Floor to Top Floor , 2008 .

[69]  T. K. Hamrita,et al.  Development of a "Smart" Wireless Soil Monitoring Sensor Prototype Using RFID Technology , 2005 .

[70]  Sameer Kumar,et al.  RFID in healthcare: a Six Sigma DMAIC and simulation case study. , 2012, International journal of health care quality assurance.

[71]  Ian Byfield,et al.  Developments in RFID , 1996 .

[72]  Herman Vermaak,et al.  Reducing False Negative Reads in RFID Data Streams Using an Adaptive Sliding-Window Approach , 2012, Sensors.

[73]  Kaan Kurtel,et al.  Integration of RFID and Web Service for Assisted Living , 2011, Journal of Medical Systems.

[74]  Irwin Brown,et al.  Radio frequency identification technology: An exploratory study on adoption in the South African retail sector , 2007, Int. J. Inf. Manag..

[75]  David C. Wyld,et al.  Would you like chips with that?: consumer perspectives of RFID , 2004 .

[76]  T.M. Ruff,et al.  Application of radio frequency identification systems to collision avoidance in metal/nonmetal mines , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[77]  Kevin Curran,et al.  A primer on radio frequency identification for libraries , 2007, Libr. Hi Tech.

[78]  Fujun Lai,et al.  Radio frequency identification (RFID) in China: opportunities and challenges , 2005 .

[79]  Janet M. Callahan RFID and PC technology pave way to increased profits in aggregate industry , 2002 .

[80]  Paul M. Goodrum,et al.  The application of active radio frequency identification technology for tool tracking on construction job sites , 2006 .

[81]  W. B. Lee,et al.  Critical Elements and Lessons Learnt from the Implementation of an RFID-enabled Healthcare Management System in a Medical Organization , 2011, Journal of Medical Systems.

[82]  Peter Hicks,et al.  RFID and the book trade , 1999 .

[83]  Ikmo Park,et al.  Broadband RFID tag antenna with quasi-isotropic radiation pattern , 2005 .

[84]  Shu-Jen Wang,et al.  The simulated impact of RFID-enabled supply chain on pull-based inventory replenishment in TFT-LCD industry , 2008 .

[85]  Monideepa Tarafdar,et al.  Classification of RFID adoption: An expected benefits approach , 2009, Inf. Manag..

[86]  W. B. Lee,et al.  Knowledge management approach in build-to-order supply chains , 2007, Ind. Manag. Data Syst..

[87]  Wolf Kohn,et al.  Repair-control of enterprise systems using RFID sensory data , 2005 .

[88]  Barbara Leporini,et al.  Exploiting RFIDs and Tilt-Based Interaction for Mobile Museum Guides Accessible to Vision-Impaired Users , 2008, ICCHP.

[89]  Elgar Fleisch,et al.  The Promise of Auto-ID in the Automotive Industry , 2003 .

[90]  Christian Kern,et al.  Radio-Frequency-Identification for Security and Media Circulation in Libraries , 2003, Electron. Libr..

[91]  M. Attaran RFID: an enabler of supply chain operations , 2007 .

[92]  Marcel Kossel,et al.  Circularly Polarized, Aperture-coupled Patch Antennas for a 2.4 GHz RFID System , 1999 .

[93]  Frédéric Thiesse,et al.  Adoption and Diffusion of RFID Technology in the Automotive Industry , 2007 .

[94]  Chimay J. Anumba,et al.  Potential use of real‐time data capture and job‐tracking technology in the field , 2005 .

[95]  Howard Falk Privacy in libraries , 2004, Electron. Libr..

[96]  Otthein Herzog,et al.  The future of mobile computing: R&D activities in the state of Bremen , 2007, Internet Res..

[97]  Yossi Sheffi,et al.  RFID AND THE INNOVATION CYCLE , 2004 .

[98]  James Rappold The risks of RFID , 2003 .

[99]  Robert J. Kauffman,et al.  Making the ‘MOST’ out of RFID technology: a research agenda for the study of the adoption, usage and impact of RFID , 2007, Inf. Technol. Manag..

[100]  Yahia Zare Mehrjerdi,et al.  RFID‐enabled supply chain systems with computer simulation , 2009 .

[101]  Ron Oliver,et al.  Design of ultra-low-cost UHF RFID tags for supply chain applications , 2004, IEEE Communications Magazine.

[102]  L. McCathie,et al.  Barriers to RFID Adoption in the Supply Chain , 2007, 2007 1st Annual RFID Eurasia.

[103]  A. Bayraktar,et al.  Implementation of RFID Technology for the Differentiation of Loyalty Programs , 2007 .

[104]  K. Peffers,et al.  Rewards to Investors in Innovative Information Technology Applications: First Movers and Early Followers in ATMs , 1995 .

[105]  Robert E. Spekman,et al.  RFID: from concept to implementation , 2006 .

[106]  Yahia Zare Mehrjerdi,et al.  Library Expense Control: A System Dynamics Approach , 2012, Electron. Libr..

[107]  Widad Ismail,et al.  ELECTRONIC TOLL COLLECTION SYSTEM USING PASSIVE RFID TECHNOLOGY , 2010 .

[108]  R H Clarke,et al.  A research note on radio frequency transponder effects on bloom of beef muscle. , 2004, Meat science.

[109]  Ken Gilleo,et al.  High volume, low cost flip chip assembly on polyester flex , 1999 .

[110]  Tao Lin,et al.  Going beyond auto-ID: a service-oriented smart items infrastructure , 2007, J. Enterp. Inf. Manag..

[111]  M. Kärkkäinen,et al.  Wireless product identification: enabler for handling efficiency, customisation and information sharing , 2002 .

[112]  Win-Bin See Wireless technologies for logistic distribution process , 2007 .

[113]  Yvonne Schuhmacher,et al.  Rfid Handbook Fundamentals And Applications In Contactless Smart Cards And Identification , 2016 .

[114]  Roy Want,et al.  RFID. A key to automating everything. , 2004, Scientific American.

[115]  Binshan Lin,et al.  Securing industry-wide EPCglobal Network with WS-Security , 2005, Ind. Manag. Data Syst..

[116]  J. Landt,et al.  The history of RFID , 2005, IEEE Potentials.

[117]  John Ayoade,et al.  Roadmap to solving security and privacy concerns in RFID systems , 2007, Comput. Law Secur. Rev..

[118]  Lorraine Lee,et al.  Radio frequency identification (RFID) implementation in the service sector: A customer-facing diffusion model , 2008 .

[119]  Branko Tadic,et al.  Machining fixture assembly/disassembly in RFID environment , 2011 .

[120]  Heikki Huomo,et al.  Virtual product design case study: the Nokia RFID tag reader , 2005, IEEE Pervasive Comput..

[121]  R. Harrington Theory of loaded scatterers , 1964 .

[122]  James Sommerville,et al.  RFID in the Built Environment: Buried Asset Locating Systems , 2006, EG-ICE.

[123]  Yves Dallery,et al.  Analysis of the impact of the RFID technology on reducing product misplacement errors at retail stores , 2008 .

[124]  R. Bunduchi,et al.  Mapping the benefits and costs associated with process innovation: The case of RFID adoption , 2011 .

[125]  Andreas Krabs,et al.  Automatic identification in packaging — radio frequency identification in multiway systems , 1999 .

[126]  Alp Ustundag,et al.  The impacts of Radio Frequency Identification (RFID) technology on supply chain costs , 2009 .

[127]  Oliver Günther,et al.  RFID and the Perception of Control: The Consumer's View , 2005, IEEE Engineering Management Review.

[128]  Andrea Scorzoni,et al.  Flexible tag microlab development: Gas sensors integration in RFID flexible tags for food logistic , 2007 .

[129]  Pau-Choo Chung,et al.  Reliability improvement for an RFID-based psychiatric patient localization system , 2008, Comput. Commun..

[130]  Karen Coyle,et al.  Management of RFID in libraries , 2005 .

[131]  Mikael Ahlund RFID in the biopharmaceutical supply chain , 2005 .

[132]  Christine Connolly Sensor trends in processing and packaging of foods and pharmaceuticals , 2007 .

[133]  Nobuyoshi Yabuki,et al.  An on-site inspection support system using radio frequency identification tags and personal digital assistants , 2002 .

[134]  Valencia V. Courtney A comparable market study of RFID for manual item-level accountability inventory and tracking systems , 2007 .

[135]  S. Stankovski,et al.  Implementation of RFID Technology in Parking Lot Access Control System , 2007, 2007 1st Annual RFID Eurasia.

[136]  Emre Cevikcan,et al.  Fuzzy rule-based system for the economic analysis of RFID investments , 2010, Expert Syst. Appl..

[137]  Erin Budin,et al.  Prevention and management of product recalls in the processed food industry: a case study based on an exporter's perspective , 2006 .

[138]  Rudolf Artmann,et al.  Electronic identification systems: state of the art and their further development , 1999 .

[139]  Peter Jones,et al.  The benefits, challenges and impacts of radio frequency identification technology (RFID) for retailers in the UK , 2005 .

[140]  D. Wyld Radio Frequency Identification , 2008 .

[141]  Pedro M. Reyes,et al.  Is RFID right for your organization or application , 2007 .

[142]  James Sommerville,et al.  Intelligent buildings with radio frequency identification devices , 2005 .

[143]  Manish Bhuptani,et al.  RFID Field Guide: Deploying Radio Frequency Identification Systems , 2005 .

[144]  Patrick J. Sweeney RFID For Dummies , 2005 .

[145]  Lung-Chuang Wang,et al.  Enhancing construction quality inspection and management using RFID technology , 2008 .

[146]  Xiaoqing Li,et al.  Buddy-finding in the mobile environment , 2005 .

[147]  Mi Sook Lee,et al.  An Empirical Study about RFID Acceptance- Focus on the Employees in Korea - , 2009 .

[148]  Stephen Burgess,et al.  Information quality attributes associated with RFID‐derived benefits in the retail supply chain , 2007 .

[149]  Greg Goth RFID: not quite prime time, but dawdle at your own risk , 2005, IEEE Distributed Systems Online.

[150]  H. Kwon,et al.  Compact slotted planar inverted-F RFID tag mountable on metallic objects , 2005 .

[151]  David C. Wyld,et al.  RFID is no fake: the adoption of radio frequency identification technology in the pharmaceutical supply chain , 2007 .

[152]  Basheer M. Khumawala,et al.  Radio frequency identification technology: applications, technical challenges and strategies , 2006 .

[153]  Vincent M. Stanford,et al.  Pervasive Computing Goes the Last 100 Feet with RFID Systems , 2003, IEEE Pervasive Comput..

[154]  C. Upfold,et al.  Radio Frequency Identification (RFID) Adoption in the South African Retail Sector: an Investigation of Perceptions Held by Members of the Retail Sector Regarding the Adoption Constraints , 2010 .

[155]  Peter Husar,et al.  Radio Frequency Identification (RFID) in medical environment: Gaussian Derivative Frequency Modulation (GDFM) as a novel modulation technique with minimal interference properties , 2011, 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[156]  Klaus Finkenzeller,et al.  RFID Handbook: Radio-Frequency Identification Fundamentals and Applications , 2000 .

[157]  T. C. Edwin Cheng,et al.  Mobile commerce integrated with RFID technology in a container depot , 2007, Decis. Support Syst..

[158]  David Hillier,et al.  Radio frequency identification in retailing and privacy and public policy issues , 2004 .

[159]  Lara Srivastava Radio frequency identification: ubiquity for humanity , 2007 .

[160]  David Hillier,et al.  Radio frequency identification in the UK: opportunities and challenges , 2004 .

[161]  김기홍,et al.  EPC Information Service 성능 테스트를 위한 환경 모델 링 및 고속 데이터 생성 도구의 설계 및 구현 , 2011 .

[162]  Hsin-Chieh Wu,et al.  Determinants of RFID adoption intention: Evidence from Taiwanese retail chains , 2010, Inf. Manag..

[163]  Alan Butters RFID systems, standards and privacy within libraries , 2007, Electron. Libr..

[164]  Tzong-Chen Wu,et al.  Two RFID-Based Solutions for Secure Inpatient Medication Administration , 2011, Journal of Medical Systems.

[165]  Kenneth E. Marks,et al.  UNLV Libraries and the digital identification frontier , 2005, Libr. Hi Tech.

[166]  Erwin Biebl RF Systems Based on Active Integrated Antennas , 2003 .

[167]  M CorchadoJuan,et al.  Intelligent environment for monitoring Alzheimer patients, agent technology for health care , 2008 .

[168]  E. L. Crossley A GENERAL REVIEW , 1954 .

[169]  Charlie C. Chen,et al.  Key drivers for the continued use of RFID technology in the emergency room , 2008 .

[170]  Fataneh Taghaboni-Dutta,et al.  RFID Technology Is Revolutionary: Who Should Be Involved in this Game of Tag? , 2006 .

[171]  W. B. Lee,et al.  A dynamic logistics process knowledge-based system - An RFID multi-agent approach , 2007, Knowl. Based Syst..

[172]  Javier Bajo,et al.  Intelligent environment for monitoring Alzheimer patients, agent technology for health care , 2008, Decis. Support Syst..

[173]  Yahia Zare Mehrjerdi Operations Research a Profit Making Tool , 2012 .

[174]  Christof Bornhövd,et al.  The Role of Enterprise Software , 2008 .

[175]  Y. Zare Mehrjerdi,et al.  MULTI-CRITERIA RISK-BENEFIT ANALYSIS OF HEALTHCARE MANAGEMENT , 2013 .

[176]  Maohua Wang,et al.  Wireless sensors in agriculture and food industry — Recent development and future perspective , 2005 .

[177]  B. S. Vijayaraman,et al.  An empirical study of RFID implementation in the warehousing industry , 2006 .

[178]  Yo-Ping Huang,et al.  Experiences with RFID-based interactive learning in museums , 2010, Int. J. Auton. Adapt. Commun. Syst..

[179]  Gary G. Johnson,et al.  Exploratory Research to Apply Leadership Theory to the Implementation of Radio Frequency Identification (Rfid) , 2010 .

[180]  Andrew E. Fano,et al.  The future of business services in the age of ubiquitous computing , 2002, CACM.

[181]  Matt Ward,et al.  RIFD: Frequency, standards, adoption and innovation , 2006 .

[182]  J. Tautz,et al.  RFID Tracking of Sublethal Effects of Two Neonicotinoid Insecticides on the Foraging Behavior of Apis mellifera , 2012, PloS one.

[183]  Bok M Jung,et al.  Estimating the ROI on Implementation of RFID at the Ammunition Storage Warehouse and the 40th Supply Depot: KVA as a Methodology , 2009 .

[184]  David C. Wyld RFID 101: The Next Big Thing for Management , 2007 .

[185]  Claude Kirchner,et al.  An overview of ELAN , 1998, WRLA.

[186]  Seung-Ho Shin,et al.  Security and Privacy Aspects of Low-Cost Radio Frequency Identification Systems , 2007, J. Inform. and Commun. Convergence Engineering.

[187]  Ygal Bendavid,et al.  Exploring the impact of RFID technology and the EPC network on mobile B2B eCommerce: A case study in the retail industry , 2008 .

[188]  Glover T. Ferguson Have your objects call my objects , 2002 .

[189]  K. Pramatari Collaborative supply chain practices and evolving technological approaches , 2007 .

[190]  Samir K. Srivastava,et al.  Radio frequency identification technology in retail outlets: Indian scenario , 2007, Int. J. Manuf. Technol. Manag..

[191]  P. Baccarelli IEEE Antennas and Wireless Propagation Letters , 2018, IEEE Antennas and Wireless Propagation Letters.

[192]  M. Kärkkäinen,et al.  Increasing efficiency in the supply chain for short shelf life goods using RFID tagging , 2003 .

[193]  Kurt Dittmer Blue Force Tracking: A Subset of Combat Identification , 2004 .

[194]  Frank Stajano,et al.  RFID is x-ray vision , 2005, CACM.

[195]  Yahia Zare Mehrjerdi,et al.  Coupling RFID with supply chain to enhance productivity , 2010 .

[196]  Jiang Zhang,et al.  Analytical Model of Adoption of Item Level RFID in a Two-Echelon Supply Chain with Shelf-Space and Price-Dependent Demand , 2010, 2010 43rd Hawaii International Conference on System Sciences.

[197]  Jay Singh,et al.  RFID research and testing for packages of apparel, consumer goods and fresh produce in the retail distribution environment , 2008 .

[198]  Michael Ollivier,et al.  RFID enhances materials handling , 1995 .

[199]  Ron Weinstein,et al.  RFID: a technical overview and its application to the enterprise , 2005, IT Professional.

[200]  Keskilammi,et al.  Using text as a meander line for RFID transponder antennas , 2004, IEEE Antennas and Wireless Propagation Letters.

[201]  F. Gebhart Hospitals start pilot testing RFID to curb drug diversion , 2004 .

[202]  Y. Zare Mehrjerdi,et al.  A System Dynamics Approach to Healthcare Cost Control , 2012 .

[203]  Bruce Eckfeldt,et al.  What does RFID do for the consumer? , 2005, CACM.

[204]  Kenneth H. Doerr,et al.  A hybrid approach to the valuation of RFID/MEMS technology applied to ordnance inventory / by Kenneth H. Doerr, Gates, William R., Mutty, John E. , 2006 .

[205]  Joseph L. Cavinato,et al.  Supply chain logistics initiatives , 2005 .

[206]  Howard Falk Temple of the computer , 2005, Electron. Libr..

[207]  Takao Terano,et al.  Fairy Wing: Distributed Information Service with RFID Tags , 2003, MAMUS.

[208]  Katerina Pramatari,et al.  RFID-enabled traceability in the food supply chain , 2007, Ind. Manag. Data Syst..

[209]  Jagannathan Sarangapani,et al.  Interference mitigation and read rate improvement in RFID‐based network‐centric environments , 2006 .

[210]  Ronald E. Rice,et al.  Public views of mobile medical devices and services: A US national survey of consumer sentiments towards RFID healthcare technology , 2009, Int. J. Medical Informatics.

[211]  G. Iannaccone,et al.  Design criteria for the RF section of UHF and microwave passive RFID transponders , 2005, IEEE Transactions on Microwave Theory and Techniques.

[212]  Anthony M. Townsend,et al.  Radio Frequency Identification Tagging as a Mechanism of Creating a Viable Producer's Brand in the Cattle Industry , 2005 .

[213]  W.M.G Wismans,et al.  Identification and registration of animals in the European Union , 1999 .

[214]  RongLin Li,et al.  Broadband UHF RFID tag antenna with parasitic patches for metallic objects , 2011 .

[215]  Katina Michael,et al.  RFID and Supply Chain Management: Introduction to the Special Issue , 2008, J. Theor. Appl. Electron. Commer. Res..

[216]  Ronald L. Rivest,et al.  Security and Privacy Aspects of Low-Cost Radio Frequency Identification Systems , 2003, SPC.

[217]  Anthony Furness Machine‐readable data carriers – a brief introduction to automatic identification and data capture , 2000 .

[218]  Christian Floerkemeier,et al.  Issues with RFID Usage in Ubiquitous Computing Applications , 2004, Pervasive.

[219]  Christopher Chia,et al.  Transformation of libraries in Singapore , 2001 .

[220]  H. Boeck,et al.  Technological Requirements and Derived Benefits from RFID Enabled Receiving in a Supply Chain , 2008 .

[221]  Chieh-Yu Lin,et al.  An Empirical Study on the Adoption of RFID Technology for Logistics Service Providers in China , 2009 .

[222]  Enrique Valero,et al.  Automatic Construction of 3D Basic-Semantic Models of Inhabited Interiors Using Laser Scanners and RFID Sensors , 2012, Sensors.

[223]  Priya S,et al.  RFID : The Big Player in the Libraries of the Future , 2012 .

[224]  W. Rossing,et al.  The ISO standard for radiofrequency identification of animals , 1999 .

[225]  Shrikant Jarugumilli,et al.  RFID-enabled inventory routing problems , 2007, Int. J. Manuf. Technol. Manag..

[226]  L. Sydanheimo,et al.  Effects of metallic plate size on the performance of microstrip patch-type tag antennas for passive RFID , 2005, IEEE Antennas and Wireless Propagation Letters.

[227]  Mehmet Erkan Yuksel,et al.  RFID Technology in Business Systems and Supply Chain Management , 2011 .

[228]  Scott P. Muir RFID security concerns , 2007, Libr. Hi Tech.

[229]  Hartmut Pohl,et al.  RFID security , 2004, Inf. Secur. Tech. Rep..

[230]  Naresh K. Malhotra,et al.  Unique marketing challenges at the frontiers of technology: an integrated perspective , 2004, Int. J. Technol. Manag..

[231]  Basar Oztaysi,et al.  Radio frequency identification (RFID) in hospitality , 2009 .

[232]  Tatsuo Arai,et al.  Parts and packets unification radio frequency identification (RFID) application for construction , 2005 .

[233]  Dong Hoon Lee,et al.  Efficient Authentication for Low-Cost RFID Systems , 2005, ICCSA.

[234]  S. Wamba,et al.  RFID Adoption Issues: Analysis of Organizational Benefits and Risks , 2009 .

[235]  Jennifer L. Fabbi,et al.  Branch libraries and technology: impact of a new main library , 2005, Libr. Hi Tech.

[236]  Friedemann Mattern,et al.  Super-distributed RFID Tag Infrastructures , 2004, EUSAI.

[237]  Young-eil Kim,et al.  Internal antenna design of 900 MHz-band mobile radio frequency identification system , 2007 .

[238]  Stéphane Dauzère-Pérès,et al.  A literature review on the impact of RFID technologies on supply chain management , 2010 .

[239]  Patrick Chi-leung Hui,et al.  Cryptography and authentication on RFID passive tags for apparel products , 2006, Comput. Ind..

[240]  D. Delen,et al.  RFID for Better Supply‐Chain Management through Enhanced Information Visibility , 2007 .

[241]  C. M. Roberts,et al.  Radio frequency identification (RFID) , 2006, Comput. Secur..

[242]  Sherry Hsi,et al.  RFID enhances visitors' museum experience at the Exploratorium , 2005, CACM.

[243]  Yahia Zare Mehrjerdi,et al.  RFID and its benefits: a multiple case analysis , 2011 .

[244]  Lauri Sydanheimo,et al.  Embedded wireless strain sensors based on printed RFID tag , 2011 .

[245]  Roy Want,et al.  Enabling ubiquitous sensing with RFID , 2004, Computer.

[246]  V. Subramanian,et al.  An ink-jet-deposited passive component process for RFID , 2004, IEEE Transactions on Electron Devices.

[247]  Ioannis Manikas,et al.  Traceability data management for food chains , 2006 .

[248]  Suhong Li,et al.  Radio frequency identification applications in healthcare , 2006 .

[249]  Yahia Zare Mehrjerdi,et al.  Hierarchical multi-criteria risk-benefit analysis in fuzzy environment , 2013, Appl. Soft Comput..

[250]  T.C.E. Cheng,et al.  Development of an RFID‐based Traceability System: Experiences and Lessons Learned from an Aircraft Engineering Company , 2007 .

[251]  邱郁文,et al.  Importance- Performance Analysis for the Adoption of Radio Frequency Identification (RFID) Technology , 2014 .

[252]  S. Sarma white paper Towards the 5 ¢ Tag , 2001 .

[253]  Gary Garrison,et al.  Understanding users' behaviors regarding supply chain technology: Determinants impacting the adoption and implementation of RFID technology in South Korea , 2010, Int. J. Inf. Manag..

[254]  George Roussos,et al.  Developing Consumer-Friendly Pervasive Retail Systems , 2003, IEEE Pervasive Comput..

[255]  Jiang-Liang Hou,et al.  Quantitative performance evaluation of RFID applications in the supply chain of the printing industry , 2006, Ind. Manag. Data Syst..

[256]  Ygal Bendavid,et al.  Redesigning the replenishment process of medical supplies in hospitals with RFID , 2010, Bus. Process. Manag. J..

[257]  Louis A. Lefebvre,et al.  Flexibility and technology in services: a conceptual model , 1997 .

[258]  May Tajima Strategic value of RFID in supply chain management , 2007 .

[259]  Hsiao-Cheng Yu,et al.  Challenges to Global RFID Adoption , 2006 .

[260]  Jad S. Rasul Chip on paper technology utilizing anisotropically conductive adhesive for smart label applications , 2004, Microelectron. Reliab..

[261]  Wei Zhou,et al.  RFID and item-level information visibility , 2009, Eur. J. Oper. Res..

[262]  Alan Hopkinson,et al.  Introducing RFID at Middlesex University Learning Resources , 2006, Program.

[264]  Yu-Cheng Lin,et al.  Dynamic mobile RFID-based supply chain control and management system in construction , 2007, Adv. Eng. Informatics.

[265]  Vincent M. Stanford,et al.  IEEE Pervasive Computing: Applications - Pervasive Computing Goes the Last Hundred Feet with RFID Systems , 2003, IEEE Distributed Syst. Online.

[266]  Development of an RFID-Based Tourist Management System : The Case of Kenting Resort Village in Taiwan , 2011 .

[267]  S.A. Weis RFID privacy workshop , 2004, IEEE Security & Privacy Magazine.

[268]  Giovanni Calcagnini,et al.  Radiofrequency identification and medical devices: the regulatory framework on electromagnetic compatibility. Part I: medical devices , 2012, Expert review of medical devices.

[269]  Kenneth E. Marks,et al.  Implementation of the 3M Digital identification system at the UNLV libraries , 2002 .

[270]  Kouroush Jenab,et al.  SMART RFID BASED DESIGN FOR INVENTORY MANAGEMENT IN HEALTH CARE , 2011 .

[271]  John Fernie,et al.  Quick Response: An International Perspective , 1994 .

[272]  Pedro M. Reyes,et al.  Future impacts of RFID on e‐supply chains in grocery retailing , 2005 .

[273]  Yunhao Liu,et al.  LANDMARC: Indoor Location Sensing Using Active RFID , 2004, Proceedings of the First IEEE International Conference on Pervasive Computing and Communications, 2003. (PerCom 2003)..

[274]  D. C. Twist,et al.  The impact of radio frequency identification on supply chain facilities , 2005 .

[275]  Hau L. Lee,et al.  If the Inventory Manager Knew: Value of Visibility and RFID under Imperfect Inventory Information , 2009 .

[276]  Holtjona Galanxhi-Janaqi,et al.  U-commerce: emerging trends and research issues , 2004, Ind. Manag. Data Syst..

[277]  W. Labs NEW SCANNERS, RFID SYSTEMS HELP MANUFACTURERS KEEP TRACK OF PRODUCTS IN THE MAKING , 1998 .

[278]  David C. Yen,et al.  Determinants of users' intention to adopt wireless technology: An empirical study by integrating TTF with TAM , 2010, Comput. Hum. Behav..

[279]  Dick Johnson,et al.  RFID tags improve tracking, quality on Ford line in Mexico , 2002 .

[280]  Gaetano Borriello RFID:TAGGING THE WORLD , 2005 .

[281]  Ari Juels,et al.  Strengthening EPC tags against cloning , 2005, WiSe '05.

[282]  Walter Lang,et al.  Applying autonomous sensor systems in logistics—Combining sensor networks, RFIDs and software agents , 2006 .

[283]  Mani Subramani,et al.  How Do Suppliers Benefit from Information Technology Use in Supply Chain Relationships? , 2004, MIS Q..

[284]  Scott Arnold,et al.  Winning in Wireless , 1998 .

[285]  Silvanus J. Udoka Automated data capture techniques: A prerequisite for effective integrated manufacturing systems , 1991 .

[286]  Xiaoyun Chen,et al.  An Improved Authentication Approach to Enhance Security and Privacy in RFID System , 2010, 2010 Second International Conference on Intelligent Human-Machine Systems and Cybernetics.

[287]  John D. Yorkovich Lied Library: at the forefront of technology with 3M digital ID collection management , 2001 .

[288]  David A. Wagner,et al.  Privacy and security in library RFID: issues, practices, and architectures , 2004, CCS '04.

[289]  Powen Hsu,et al.  CPW-fed folded-slot antenna for 5.8 GHz RFID tags , 2004 .

[290]  ChaoYen Wu,et al.  Study of Applying Modified Delphi Method (MDM) in Constructing Business Adopting RFID Assessment Criteria , 2012 .

[291]  Colby Riggs New Gadgets on the Horizon , 2006 .

[292]  Masaru Ohki,et al.  The µ -Chip: An Ultra-Small 2.45 GHz RFID Chip for Ubiquitous Recognition Applications , 2003 .

[293]  Eric Swanson,et al.  RFID in the healthcare supply chain: usage and application. , 2009, International journal of health care quality assurance.

[294]  P. Nikitin,et al.  Antenna design for UHF RFID tags: a review and a practical application , 2005, IEEE Transactions on Antennas and Propagation.

[295]  Shien-Chiang Yu,et al.  RFID implementation and benefits in libraries , 2007, Electron. Libr..

[296]  Jaecheol Ryou,et al.  Enhancing Privacy of Universal Re-encryption Scheme for RFID Tags , 2004, EUC.

[297]  Wim J Eradus,et al.  Future developments on devices for animal radiofrequency identification , 1999 .

[298]  Antti Ruhanen,et al.  Contactless radiation pattern measurement method for UHF RFID transponders , 2005 .

[299]  Harry K. H. Chow,et al.  Integration of web‐based and RFID technology in visualizing logistics operations – a case study , 2007 .

[300]  Yahia Zare Mehrjerdi,et al.  A framework for Six‐Sigma driven RFID‐enabled supply chain systems , 2013 .

[301]  Kazuo Takaragi,et al.  An Ultra Small Individual Recognition Security Chip , 2001, IEEE Micro.

[302]  Masashi Shimizu,et al.  Ubiquitous applications using RFID tags , 2002 .

[303]  Rick Hall,et al.  Radio frequency identification: applications for dietetics professionals. , 2004, Journal of the American Dietetic Association.

[304]  Koutarou Suzuki,et al.  RFID Privacy Issues and Technical Challenges , 2005, IEEE Engineering Management Review.

[305]  Kuan Yew Wong,et al.  Critical success factors for implementing knowledge management in small and medium enterprises , 2005, Ind. Manag. Data Syst..

[306]  Jim S. Wight,et al.  Quadrifilar Helix antenna for UHF RFID , 2010, 2010 IEEE Antennas and Propagation Society International Symposium.

[307]  Daniel Hellström,et al.  The cost and process of implementing RFID technology to manage and control returnable transport items , 2009 .

[308]  Burcu Akinci,et al.  Automating the task of tracking the delivery and receipt of fabricated pipe spools in industrial projects , 2006 .

[309]  Alok Mishra,et al.  Improving Baggage Tracking, Security and Customer Services with RFID in the Airline Industry , 2010 .

[310]  Jingfeng Xia,et al.  GIS in the management of library pick‐up books , 2004 .

[311]  Yahia Zare Mehrjerdi,et al.  RFID role in efficient management of healthcare systems: a system thinking perspective , 2015 .

[312]  Pedro M. Reyes,et al.  RFID in the contemporary supply chain: multiple perspectives on its benefits and risks , 2008 .

[313]  K. Sangani RFID sees all , 2004 .

[314]  Mun Leng Ng,et al.  RFID Tags for Metallic Object Identification , 2008 .

[315]  D. Lambert,et al.  SUPPLY CHAIN MANAGEMENT , 2003 .

[316]  Jong Myoung Ko,et al.  Adaptive product tracking in RFID-enabled large-scale supply chain , 2011, Expert Syst. Appl..

[317]  Kurt Hozak,et al.  The material handling trade-off when lot splitting with RFID in a job shop , 2010 .

[318]  M. Kivikoski,et al.  Low-profile circularly polarized rectifying antenna for wireless power transmission at 5.8 GHz , 2004, IEEE Microwave and Wireless Components Letters.

[319]  Jiang Zhang,et al.  Coordination and adoption of item-level RFID with vendor managed inventory , 2008 .

[320]  Marilyn Sheck Meeting New Challenges with New Technology: The Seattle Public Library Experience , 2004 .

[321]  A. Ozdemir,et al.  Assessment of RFID Investment in the Military Logistics Systems Through The Cost of Ownership Model (COO) , 2010 .

[322]  Simson L. Garfinkel,et al.  RFID privacy: an overview of problems and proposed solutions , 2005, IEEE Security & Privacy Magazine.

[323]  Chieng We Ng Improved back-of-the-house processes with RFID enabled it model for hospitality industry in Singapore , 2010 .

[324]  Shane Guilford,et al.  RFID benefits: looking beyond ROI , 2005 .

[325]  Munir Mandviwalla,et al.  Integrating the Supply Chain with RFID: A Technical and Business Analysis , 2005, Commun. Assoc. Inf. Syst..

[326]  James B. Rautio Electromagnetic analysis speeds RFID design , 2003 .

[327]  Keith W. Miertschin,et al.  Analysis of Tobyhanna Army Depot's Radio Frequency Identification (RFID) Pilot Program: RFID as an Asset Management Tool , 2005 .

[328]  Nitin Singh,et al.  Emerging technologies to support supply chain management , 2003, CACM.

[329]  A. Goldsmith Communication by Means of Reflected Power , 2022 .

[330]  Elgar Fleisch,et al.  Innovationspotenzial von RFID für das Supply-Chain-Management , 2005, Wirtsch..