Spectral clustering based on histogram of oriented gradient (HOG) of coal using laser-induced breakdown spectroscopy

The quantification accuracy of laser-induced breakdown spectroscopy was limited due to matrix effects. In this work, a method named unsupervised-clustering-based quantification (UCQ) was proposed to reduce the matrix effects by clustering the spectra by k-means combined with the histogram of oriented gradient (HOG). The calibration spectra were clustered by k-means into k categories, and partial least squares regression (PLSR) models were established on each category. The unknown spectra were classified, and the models related to their categories were used in prediction. Leave-one-out cross-validation (LOOCV) was used to evaluate the accuracy of quantitative analysis. By clustering the spectra into three categories using HOG as the clustering features, the accuracy of distinguishing samples from different sources was 100%, and the accuracy of distinguishing samples from the same source with volatile content higher and lower than 20 wt% was 96.84% and 97.75%. When the number of clusters was three, the best prediction accuracy of Aad was achieved, the R2P was increased from 0.7677 to 0.8178, and the RMSEP was decreased from 2.0733 wt% to 1.8362 wt%. The highest accuracy of predicting Vad was achieved when the number of clusters was two, the R2P was increased from 0.9692 to 0.9786, and the RMSEP was decreased from 1.3066 wt% to 1.0879 wt%. The prediction error of Qbad was minimized when the spectra were clustered into five categories, the R2P was increased from 0.8093 to 0.8306, and the RMSEP was decreased from 0.8892 MJ kg−1 to 0.8382 MJ kg−1. The results demonstrated that HOG has great potential in the classification of spectra, and the influence of the matrix effects can be reduced by unsupervised clustering.

[1]  B. Welz,et al.  Determination of cadmium, copper and lead in mineral coal using solid sampling graphite furnace atomic absorption spectrometry , 2001 .

[2]  Accuracy improvement of quantitative analysis of calorific value of coal by combining support vector machine and partial least square methods in laser-induced breakdown spectroscopy , 2020 .

[3]  Larry L. Baxter,et al.  LASER SPARK EMISSION SPECTROSCOPY FOR IN SITU, REAL-TIME MONITORING OF PULVERIZED COAL PARTICLE COMPOSITION , 1991 .

[4]  David G. Lowe,et al.  Distinctive Image Features from Scale-Invariant Keypoints , 2004, International Journal of Computer Vision.

[5]  L. Guo,et al.  Background removal in soil analysis using laser- induced breakdown spectroscopy combined with standard addition method. , 2016, Optics express.

[6]  Kun Liu,et al.  A quantitative analysis method assisted by image features in laser-induced breakdown spectroscopy. , 2019, Analytica chimica acta.

[7]  T. Yamashita,et al.  Determination of trace elements in coal and coal fly ash by joint-use of ICP-AES and atomic absorption spectrometry. , 2007, Talanta.

[8]  B. Kowalski,et al.  Partial least-squares regression: a tutorial , 1986 .

[9]  W. R. Kelly,et al.  Determination of mercury in coal by isotope dilution cold-vapor generation inductively coupled plasma mass spectrometry. , 2002, Analytical chemistry.

[10]  B. Atkin,et al.  The direct determination of the forms of sulphur in coal using microwave digestion and i.c.p-a.e.s analysis , 2000 .

[11]  Yuzhu Liu,et al.  Rapid analysis of heavy metals in the coal ash with laser-induced breakdown spectroscopy , 2018, Optik.

[12]  K. alik An efficient k'-means clustering algorithm , 2008 .

[13]  Yongfeng Lu,et al.  Classification accuracy improvement of laser-induced breakdown spectroscopy based on histogram of oriented gradients features of spectral images. , 2018, Optics express.

[14]  Bruce L. Chadwick,et al.  Analysis of Lignite Using Laser-Induced Breakdown Spectroscopy , 2000 .

[15]  Z. Zhuo,et al.  LIBS analysis of the ash content, volatile matter, and calorific value in coal by partial least squares regression based on ash classification , 2020 .

[16]  E. Caramão,et al.  Slurry sampling graphite furnace atomic absorption spectrometry: determination of trace metals in mineral coal. , 1999, Talanta.

[17]  D. Pozebon,et al.  Determination of Cd, Hg, Pb and Tl in coal and coal fly ash slurries using electrothermal vaporization inductively coupled plasma mass spectrometry and isotopic dilution , 2003 .

[18]  Jidong Lu,et al.  Optimizing the binder percentage to reduce matrix effects for the LIBS analysis of carbon in coal , 2017 .

[19]  D. Body,et al.  Optimization of the spectral data processing in a LIBS simultaneous elemental analysis system , 2001 .

[20]  B. Welz,et al.  Determination of Lead in Coal Using Direct Solid Sampling and High-Resolution Continuum Source Graphite Furnace Atomic Absorption Spectrometry , 2006 .

[21]  Bret C. Windom,et al.  Laser ablation—laser induced breakdown spectroscopy (LA-LIBS): A means for overcoming matrix effects leading to improved analyte response , 2009 .

[22]  Quanle Zou,et al.  Rationality evaluation of production deployment of outburst-prone coal mines: A case study of nantong coal mine in Chongqing, China , 2020 .

[23]  R. Cooks,et al.  A tandem mass spectrometric investigation of hydroxy-aromatic constituents in coal liquids , 1985 .