The use of functional analysis in evaluating knee kinematics.

The importance of understanding the six-degrees-of-freedom kinematics of the knee during ambulatory activities was examined in the context of the function of total knee arthroplasty. Studies of knee kinematics during walking, stair climbing, and a deep flexion squat indicate that knee kinematics is activity-dependent. A comparative study of patients and healthy subjects during stair climbing indicates the importance of maintaining the function of the posterior cruciate ligament. A second study used walking kinematics derived from patient testing as input to a wear simulator. There was increased wear relative to standard simulator input that was related to the slip velocity at the contact surface. Finally, results from a study of deep flexion indicate that substantial femoral rotation is required during deep flexion activities. The current study shows the importance of studying in vivo knee kinematics for future enhancement in the treatment of the arthritic knee.

[1]  J B Stiehl,et al.  In vivo kinematic analysis of a mobile bearing total knee prosthesis. , 1997, Clinical orthopaedics and related research.

[2]  T P Andriacchi,et al.  Correcting for deformation in skin-based marker systems. , 2001, Journal of biomechanics.

[3]  Y Yamano,et al.  Tibiofemoral movement 3: full flexion in the living knee studied by MRI. , 2000, The Journal of bone and joint surgery. British volume.

[4]  P. Walker,et al.  The Dominance of Cyclic Sliding in Producing Wear in Total Knee Replacements , 1991, Clinical orthopaedics and related research.

[5]  G. R. Pennock,et al.  An anatomy-based coordinate system for the description of the kinematic displacements in the human knee. , 1990, Journal of biomechanics.

[6]  A Leardini,et al.  Position and orientation in space of bones during movement: experimental artefacts. , 1996, Clinical biomechanics.

[7]  E S Grood,et al.  A joint coordinate system for the clinical description of three-dimensional motions: application to the knee. , 1983, Journal of biomechanical engineering.

[8]  T P Andriacchi,et al.  A striated pattern of wear in ultrahigh-molecular-weight polyethylene components of Miller-Galante total knee arthroplasty. , 1998, The Journal of arthroplasty.

[9]  M. Moon,et al.  Squatting Following Total Knee Arthroplasty , 1995, Clinical orthopaedics and related research.

[10]  J Perry,et al.  Functional comparison of posterior cruciate-retained versus cruciate-sacrificed total knee arthroplasty. , 1988, Clinical orthopaedics and related research.

[11]  M S Hefzy,et al.  Kinematics of the knee joint in deep flexion: a radiographic assessment. , 1998, Medical engineering & physics.

[12]  T. Andriacchi,et al.  27 Relation between knee flexion and tibial-femoral rotation during activities involving deep flexion , 1997 .

[13]  T P Andriacchi,et al.  Interaction between intrinsic knee mechanics and the knee extensor mechanism , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[14]  M A Freeman,et al.  Alignment in total knee arthroplasty. Correlated biomechanical and clinical observations. , 1983, Clinical orthopaedics and related research.

[15]  B B Seedhom,et al.  Forces during squatting and rising from a deep squat. , 1982, Engineering in medicine.

[16]  H. K. Ramakrishnan,et al.  Comprehensive gait analysis in posterior-stabilized knee arthroplasty. , 1996, The Journal of arthroplasty.

[17]  T. Andriacchi Dynamics of knee malalignment. , 1994, The Orthopedic clinics of North America.

[18]  J B Morrison,et al.  The mechanics of the knee joint in relation to normal walking. , 1970, Journal of biomechanics.

[19]  W J Maloney,et al.  The effects of implant design on range of motion after total knee arthroplasty. Total condylar versus posterior stabilized total condylar designs. , 1992, Clinical orthopaedics and related research.

[20]  P Ducheyne,et al.  Failure of total knee arthroplasty due to loosening and deformation of the tibial component. , 1978, The Journal of bone and joint surgery. American volume.

[21]  P R Cavanagh,et al.  Three-dimensional kinematics of the human knee during walking. , 1992, Journal of biomechanics.

[22]  C. Ranawat,et al.  Duo-condylar total knee arthroplasty. , 1973, Clinical orthopaedics and related research.

[23]  A. J. van den Bogert,et al.  Effect of skin movement on the analysis of skeletal knee joint motion during running. , 1997, Journal of biomechanics.

[24]  J. Barbera,et al.  Contact mechanics , 1999 .

[25]  R. Scott,et al.  Kneeling ability after total knee arthroplasty. Perception and reality. , 1999, Clinical orthopaedics and related research.

[26]  T. Andriacchi,et al.  Tractive forces during rolling motion of the knee: implications for wear in total knee replacement. , 1997, Journal of biomechanics.

[27]  M. Freeman,et al.  Tibiofemoral movement 4: changes of axial tibial rotation caused by forced rotation at the weight-bearing knee studied by RSA. , 2000, The Journal of bone and joint surgery. British volume.

[28]  Angelo Cappello,et al.  Multiple anatomical landmark calibration for optimal bone pose estimation , 1997 .

[29]  P. Walker,et al.  Wear of ultra-high-molecular-weight polyethylene components of 90 retrieved knee prostheses. , 1988, The Journal of arthroplasty.

[30]  T P Andriacchi,et al.  A point cluster method for in vivo motion analysis: applied to a study of knee kinematics. , 1998, Journal of biomechanical engineering.

[31]  S.A. Banks,et al.  Accurate measurement of three-dimensional knee replacement kinematics using single-plane fluoroscopy , 1996, IEEE Transactions on Biomedical Engineering.

[32]  V Pinskerova,et al.  Tibiofemoral movement 2: the loaded and unloaded living knee studied by MRI. , 2000, The Journal of bone and joint surgery. British volume.

[33]  J B Stiehl,et al.  The cruciate ligaments in total knee arthroplasty: a kinematic analysis of 2 total knee arthroplasties. , 2000, The Journal of arthroplasty.

[34]  V Pinskerova,et al.  Tibiofemoral movement 1: the shapes and relative movements of the femur and tibia in the unloaded cadaver knee. , 2000, The Journal of bone and joint surgery. British volume.

[35]  T. Andriacchi,et al.  Interaction between active and passive knee stabilizers during level walking , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[36]  T P Andriacchi,et al.  Knee biomechanics and total knee replacement. , 1986, The Journal of arthroplasty.

[37]  T. Andriacchi,et al.  The influence of total knee-replacement design on walking and stair-climbing. , 1982, The Journal of bone and joint surgery. American volume.

[38]  S A Banks,et al.  In vivo kinematics of cruciate-retaining and -substituting knee arthroplasties. , 1997, The Journal of arthroplasty.