Square pulse thermography in frequency domain as adaptation of pulsed phase thermography for qualitative and quantitative applications in cultural heritage and civil engineering

Abstract A methodical approach for qualitative and quantitative non-destructive testing of near-surface structures in civil engineering (CE) with active thermography is presented. It adopts the non-destructive testing (NDT) method of pulsed phase thermography (PPT) for the special requirements of CE and cultural heritage. The concept might be understood as a square pulse thermography (SPT) in frequency domain or an amplitude-expanded PPT with square pulse heating. After a discussion of the material spanning concept and qualitative results in cultural heritage a new approach for quantitative non-destructive testing (NDT) of near-surface structures in CE with active thermography is introduced and tested by investigations on concrete specimen with artificial defects. It is based on the thermal diffusivity of the material and the characteristic frequency of the first extrema of phase and amplitude contrast and aims at complementing the established approaches for defect depth calculation for measurements with long heating and observation times. It should be easily extendable to other fields of application.

[1]  Ralf Arndt,et al.  Development and test of a numerical model for pulse thermography in civil engineering , 2010 .

[2]  Walter J. Wild,et al.  Amplitude-sensitive modulation thermography to measure moisture in building materials , 1998, Defense, Security, and Sensing.

[3]  Ermanno G. Grinzato,et al.  Infrared and thermal testing for conservation of historic buildings , 2001 .

[4]  Ing. Bernd Hillemeier.  Location Of Reinforcement By Induction-Thermography , 1985, Other Conferences.

[5]  Gerd Busse,et al.  Lockin thermography with eddy current excitation , 2004 .

[6]  S. Marinetti,et al.  Pulse phase infrared thermography , 1996 .

[7]  Bernd Hillemeier,et al.  Application of impulse-thermography for non-destructive assessment of concrete structures , 2006 .

[8]  Ralf Arndt,et al.  Rechteckimpuls-Thermografie im Frequenzbereich - Adaption der Puls-Phasen-Thermografie für die qualitative und quantitative zerstörungsfreie Prüfung oberflächennaher Strukturen im Bauwesen , 2007 .

[9]  Antonia Moropoulou,et al.  Detection and quantification of discontinuities in building materials using transient thermal NDT techniques : Modeling and experimental work , 2006 .

[10]  Ralf Arndt,et al.  Square pulse thermography in frequency domain , 2008, SPIE Defense + Commercial Sensing.

[11]  Herbert Wiggenhauser,et al.  Intestigation of concrete structures with pulse phase thermography , 2005 .

[12]  C. Maierhofer,et al.  Structural Investigation of Concrete and Masonry Structures behind Plaster by means of Pulse Phase Thermography , 2004 .

[13]  A. Bendada,et al.  Comparative Study of Active Thermography Techniques for the Nondestructive Evaluation of Honeycomb Structures , 2009 .

[14]  Xavier Maldague,et al.  Pulsed phase thermography reviewed , 2004 .

[15]  Xavier Maldague,et al.  Advances in pulsed phase thermography , 2002 .

[16]  Ermanno G. Grinzato,et al.  Thermal Characterization of Defects in Building Envelopes Using Long Square Pulse and Slow Thermal Wave Techniques , 1997 .

[17]  Robert Osiander,et al.  Time-resolved infrared radiometry with step heating. A review , 1998 .

[18]  P. Wyss,et al.  Factors affecting the detectability of voids by infrared thermography , 1996 .