Topology optimization of a passive thermal actuator

This paper presents a topology-optimized passive thermal micro actuator with large thermal deflection. The actuator relies on different coefficients of thermal expansion of an active material as well as the substrate and temperature changes of the surrounding environment. COMSOL Multiphysics is used for the topology optimization algorithm. The resulting shape is approximated by straight beams for a simpler fabrication. Two such shapes are arranged facing each other and coupled to a lever beam for a further increase of the temperature dependent deflection. The final design is manufactured using electroplated Ni on a Si substrate and state-of-the-art micro fabrication processes. The structures are characterized in a temperature range from -30°C up to +40°C with a measurement setup comprising a sealable chamber, a thermoelectric stage, and an optical microscope. The actuator exhibits a measured linear temperature deflection of 1 μm/K and a simulated force of 9.5 μN/K. The occupied area is 1.7×2.4 mm2 while the area-specific work is 2.34 μJ/K2/m2.

[1]  E. Enikov,et al.  Analytical model for analysis and design of V-shaped thermal microactuators , 2005, Journal of Microelectromechanical Systems.

[2]  Ole Sigmund,et al.  Topology synthesis of large‐displacement compliant mechanisms , 2001 .

[3]  Bruno Ando,et al.  Cascaded “Triple-Bent-Beam” MEMS Sensor for Contactless Temperature Measurements in Nonaccessible Environments , 2011, IEEE Transactions on Instrumentation and Measurement.

[4]  Design and fabrication of electro-thermally activated micro gripper with large tip opening and holding force , 2011, 2011 IEEE SENSORS Proceedings.

[5]  Thilo Sauter,et al.  Highly sensitive thermal actuators for temperature sensing , 2013, Microtechnologies for the New Millennium.

[6]  N. Nguyen,et al.  A polymeric microgripper with integrated thermal actuators , 2004 .

[7]  L. H. Olesen,et al.  A high‐level programming‐language implementation of topology optimization applied to steady‐state Navier–Stokes flow , 2004, physics/0410086.

[8]  Yixian Du,et al.  Thermomechanical compliant actuator design using meshless topology optimization , 2008, 2008 Asia Simulation Conference - 7th International Conference on System Simulation and Scientific Computing.

[9]  Cheng-Hsien Liu,et al.  A large-displacement thermal actuator designed for MEMS pitch-tunable grating , 2008 .

[10]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. I. Basic theory , 1993 .

[11]  Chengkuo Lee,et al.  Study of electrothermal V-beam actuators and latched mechanism for optical switch , 2005 .

[12]  Ole Sigmund,et al.  Design of multiphysics actuators using topology optimization - Part I: One-material structures , 2001 .

[13]  O. Sigmund,et al.  Compliant electro-thermal microactuators , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[14]  Siyuan He,et al.  Characterization of Young's modulus and residual stress gradient of MetalMUMPs electroplated nickel film , 2009 .

[15]  J. Lang,et al.  A bulk-micromachined bistable relay with U-shaped thermal actuators , 2005, Journal of Microelectromechanical Systems.

[16]  O. Sigmund,et al.  Topology optimization using a mixed formulation: An alternative way to solve pressure load problems , 2007 .

[17]  Y. Gianchandani,et al.  A micromachined strain sensor with differential capacitive readout , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[18]  C. Hsu,et al.  Mechanical stability and adhesion of microstructures under capillary forces. II. Experiments , 1993 .

[19]  R. D. Foltz.  CRC Handbook of Chemistry and Physics:A Ready-Reference Book of Chemical and Physical Data , 2000 .

[20]  Y. Gianchandani,et al.  Bent-beam electrothermal actuators-Part I: Single beam and cascaded devices , 2001 .