Photosynthetic efficiency and rate of CO2 assimilation by Arthrospira (Spirulina) platensis continuously cultivated in a tubular photobioreactor.

Similar to other photosynthetic microorganisms, the cyanobacterium Arthrospira platensis can be used to produce pigments, single cell proteins, fatty acids (which can be used for bioenergy), food and feed supplements, and biofixation of CO(2) . Cultivation in a specifically designed tubular photobioreactor is suitable for photosynthetic biomass production, because the cultivation area can be reduced by distributing the microbial cells vertically, thus avoiding loss of ammonia and CO(2) . The aim of this study was to investigate the influence of light intensity and dilution rate on the photosynthetic efficiency and CO(2) assimilation efficiency of A. platensis cultured in a tubular photobioreactor in a continuous process. Urea was used as a nitrogen source and CO(2) as carbon source and for pH control. Steady-state conditions were achieved in most of the runs, indicating that continuous cultivation of this cyanobacterium in a tubular photobioreactor could be an interesting alternative for the large-scale fixation of CO(2) to mitigate the greenhouse effect while producing high protein content biomass.

[1]  Sunao Sato,et al.  Arthrospira (Spirulina) platensis cultivation in tubular photobioreactor: Use of no-cost CO2 from ethanol fermentation , 2012 .

[2]  R. Bezerra,et al.  CO2 from alcoholic fermentation for continuous cultivation of Arthrospira (Spirulina) platensis in tubular photobioreactor using urea as nitrogen source , 2011, Biotechnology progress.

[3]  Jo‐Shu Chang,et al.  Perspectives on microalgal CO₂-emission mitigation systems--a review. , 2011, Biotechnology advances.

[4]  Sunao Sato,et al.  A new approach to ammonium sulphate feeding for fed‐batch Arthrospira (Spirulina) platensis cultivation in tubular photobioreactor , 2010, Biotechnology progress.

[5]  Attilio Converti,et al.  Repeated fed-batch cultivation of Arthrospira (Spirulina) platensis using urea as nitrogen source , 2009 .

[6]  R. Bezerra,et al.  Influence of ammonium chloride feeding time and light intensity on the cultivation of Spirulina (Arthrospira) platensis , 2008, Biotechnology and bioengineering.

[7]  A. Lodi,et al.  Effects of carbon dioxide feeding rate and light intensity on the fed-batch pulse-feeding cultivation of Spirulina platensis in helical photobioreactor , 2008 .

[8]  Sunao Sato,et al.  Cultivation of Spirulina platensis by continuous process using ammonium chloride as nitrogen source , 2007 .

[9]  Attilio Converti,et al.  Influence of pH, temperature, and urea molar flowrate on Arthrospira platensis fed‐batch cultivation: A kinetic and thermodynamic approach , 2007, Biotechnology and bioengineering.

[10]  C. Solisio,et al.  Cultivation of Spirulina platensis in a combined airlift-tubular reactor system , 2006 .

[11]  R. Prasanna,et al.  Formulation of a low-cost medium for mass production of Spirulina , 2006 .

[12]  Sunao Sato,et al.  CULTIVATION OF ARTHROSPIRA (SPIRULINA) PLATENSIS (CYANOPHYCEAE) BY FED‐BATCH ADDITION OF AMMONIUM CHLORIDE AT EXPONENTIALLY INCREASING FEEDING RATES 1 , 2004 .

[13]  Katarzyna Chojnacka,et al.  Evaluation of Spirulina sp. growth in photoautotrophic, heterotrophic and mixotrophic cultures , 2004 .

[14]  Sunao Sato,et al.  Effect of reducing the light intensity on the growth and production of chlorophyll by Spirulina platensis , 2004 .

[15]  Carlos Jiménez,et al.  Relationship between physicochemical variables and productivity in open ponds for the production of Spirulina: a predictive model of algal yield , 2003 .

[16]  E. Olguín,et al.  Annual productivity of Spirulina (Arthrospira) and nutrient removal in a pig wastewater recycling process under tropical conditions , 2003, Journal of Applied Phycology.

[17]  Johannes Tramper,et al.  Enclosed outdoor photobioreactors: light regime, photosynthetic efficiency, scale-up, and future prospects. , 2003, Biotechnology and bioengineering.

[18]  Sunao Sato,et al.  An investigation of effect of replacing nitrate by urea in the growth and production of chlorophyll by Spirulina platensis , 2002 .

[19]  A. Vonshak,et al.  Spirulina Platensis Arthrospira : Physiology, Cell-Biology And Biotechnology , 1997 .

[20]  Yoshitomo Watanabe,et al.  Photosynthetic CO2 conversion technologies using a photobioreactor incorporating microalgae - energy and material balances - , 1996 .

[21]  D. Hall,et al.  Photosynthetic CO2 fixation technologies using a helical tubular bioreactor incorporating the filamentous cyanobacterium Spirulina platensis , 1995 .

[22]  E. Becker.  Microalgae: Biotechnology and Microbiology , 1994 .

[23]  G. Dubertret,et al.  A structured model for simulation of cultures of the cyanobacterium Spirulina platensis in photobioreactors: II. Identification of kinetic parameters under light and mineral limitations , 1992, Biotechnology and bioengineering.

[24]  U. Schlösser.  Sammlung von Algenkulturen , 1982, Berichte der Deutschen Botanischen Gesellschaft.

[25]  R. Samson,et al.  Testing of an ammonia ion selective electrode for ammonia nitrogen measurement in the methanogenic sludge , 1982, Biotechnology Letters.

[26]  A. Miller,et al.  Evidence for HCO(3) Transport by the Blue-Green Alga (Cyanobacterium) Coccochloris peniocystis. , 1980, Plant physiology.

[27]  A. Leduy,et al.  An improved method for optical density measurement of the semimicroscopic blue green alga Spirulina maxima , 1977 .

[28]  H. Shimamatsu.  Mass production of Spirulina, an edible microalga , 2004, Hydrobiologia.

[29]  S. Boussiba,et al.  High internal pH conveys ammonia resistance in spirulina platensis , 1991 .