Motor bearing diagnostics performed by means of laser vibrometer

Damage of bearings is the most common cause of failures in squirrel-cage induction motors. That is why the issues connected with diagnostics of bearings are so important. The equipment employed for bearing diagnostics usually makes use of vibrations as the criterion for technical condition of the bearings.

[1]  Bertrand Raison,et al.  Models for bearing damage detection in induction motors using stator current monitoring , 2008, 2004 IEEE International Symposium on Industrial Electronics.

[2]  Alberto Bellini,et al.  Diagnosis of Bearing Faults in Induction Machines by Vibration or Current Signals: A Critical Comparison , 2008, IEEE Transactions on Industry Applications.

[3]  A. Bellini,et al.  Diagnosis of mechanical faults by spectral kurtosis energy , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[4]  A Dzwonkowski,et al.  Diagnosis of bearing damage in induction motors by instantaneous power analysis , 2012 .

[5]  L. Frosini,et al.  Effect of the bearings faults on the efficiency of the induction motors , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[6]  Asoke K. Nandi,et al.  Genetic algorithms for feature selection in machine condition monitoring with vibration signals , 2000 .

[7]  J. Regnier,et al.  Detection of bearing faults in asynchronous motors using Luenberger speed observer , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[8]  T.G. Habetler,et al.  Motor bearing damage detection using stator current monitoring , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.

[9]  Girish Kumar Singh,et al.  Induction machine drive condition monitoring and diagnostic research—a survey , 2003 .

[10]  H. Karagülle,et al.  Simulation and analysis of vibration signals generated by rolling element bearing with defects , 2003 .

[11]  Mario Pacas,et al.  Frequency Response Analysis for Rolling-Bearing Damage Diagnosis , 2008, IEEE Transactions on Industrial Electronics.

[12]  Nicola Paone,et al.  Comparative study between laser vibrometer and accelerometer measurements for mechanical fault detection of electric motors , 2002, International Conference on Vibration Measurements by Laser Techniques: Advances and Applications.

[13]  Wei Zhou,et al.  Incipient Bearing Fault Detection via Stator Current Noise Cancellation using Wiener Filter , 2007, 2007 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.