Optimal design of single-tuned passive filters using Response Surface Methodology

This paper presents an approach based on Response Surface Methodology (RSM) to find the optimal parameters of the single-tuned passive filters for harmonic mitigation. The main advantages of RSM can be underlined as easy implementation and effective computation. Using RSM, the single-tuned harmonic filter is designed to minimize voltage total harmonic distortion (THDV) and current total harmonic distortion (THDI). Power factor (PF) is also incorporated in the design procedure as a constraint. To show the validity of the proposed approach, RSM and Classical Direct Search (Grid Search) methods are evaluated for a typical industrial power system.

[1]  Chia-Ju Wu,et al.  A PSO Method With Nonlinear Time-Varying Evolution for Optimal Design of Harmonic Filters , 2009 .

[2]  M.H. Hocaoglu,et al.  Experimental verification of harmonic load models , 2008, 2008 43rd International Universities Power Engineering Conference.

[3]  F. Peng Harmonic sources and filtering approaches , 2001 .

[4]  Li He-ming,et al.  Simulated Annealing Based Multi-Object Optimal Planning of Passive Power Filters , 2005, 2005 IEEE/PES Transmission & Distribution Conference & Exposition: Asia and Pacific.

[5]  M. T. Benchouia,et al.  Sliding-mode Control Based Three-phase Shunt Active Power Filter: Simulation and Experimentation , 2012 .

[6]  Wilsun Xu,et al.  An Investigation on the Selection of Filter Topologies for Passive Filter Applications , 2009, IEEE Transactions on Power Delivery.

[7]  Girish Kumar Singh,et al.  Power system harmonics research: a survey , 2009 .

[8]  G. Box,et al.  On the Experimental Attainment of Optimum Conditions , 1951 .

[9]  Adel M. Sharaf,et al.  A novel discrete multi-objective Particle Swarm Optimization (MOPSO) of optimal shunt power filter , 2009, 2009 IEEE/PES Power Systems Conference and Exposition.

[10]  M. M. Abdel Aziz,et al.  Power factor and your electrical utility bill in Egypt , 2003 .

[11]  J.C. Das,et al.  Passive filters - potentialities and limitations , 2003, IEEE Transactions on Industry Applications.

[12]  Murat E. Balci Optimal C-Type Filter Design to Maximize Transformer's Loading Capability under Non-sinusoidal Conditions , 2014 .

[13]  K. M. Tsang,et al.  Multi-level Shunt Active Power Filter Using Modular Cascade H-bridge and Delay Firing , 2013 .

[14]  Shady H. E. Abdel Aleem,et al.  Effective utilization of cables and transformers using passive filters for non-linear loads , 2015 .

[15]  Anthoula Menti,et al.  Genetic algorithm-based optimal design of shunt compensators in the presence of harmonics , 2008 .

[16]  Ying-Yi Hong,et al.  Interactive multiobjective passive filter planning with fuzzy parameters in distribution systems using genetic algorithms , 2003 .

[17]  Anthoula Menti,et al.  Optimal sizing and limitations of passive filters in the presence of background harmonic distortion , 2009 .

[18]  Ahmed F. Zobaa,et al.  Optimal Sizing of C-Type Passive Filters under Non-Sinusoidal Conditions , 2014 .

[19]  Murat E. Balci,et al.  Optimal Design of Single-Tuned Passive Filters to Minimize Harmonic Loss Factor , 2014 .

[20]  Ahmed Faheem Zobaa,et al.  Optimal $C$-Type Passive Filter Based on Minimization of the Voltage Harmonic Distortion for Nonlinear Loads , 2012, IEEE Transactions on Industrial Electronics.

[21]  Shady H. E. Abdel Aleem,et al.  Optimal passive filter design for effective utilization of cables and transformers under non-sinusoidal conditions , 2014, 2014 16th International Conference on Harmonics and Quality of Power (ICHQP).

[22]  Chinyao Low,et al.  An ant direction hybrid differential evolution heuristic for the large-scale passive harmonic filters planning problem , 2008, Expert Syst. Appl..

[23]  Chia-Nan Ko,et al.  A PSO method with nonlinear time-varying evolution based on neural network for design of optimal harmonic filters , 2009, Expert Syst. Appl..

[24]  Chi-Jui Wu,et al.  Optimal multiobjective planning of large-scale passive harmonic filters using hybrid differential evolution method considering parameter and loading uncertainty , 2005 .

[25]  Tamara G. Kolda,et al.  Optimization by Direct Search: New Perspectives on Some Classical and Modern Methods , 2003, SIAM Rev..

[26]  Hatem H. Zeineldin,et al.  Particle Swarm Optimization of Passive Filters for Industrial Plants in Distribution Networks , 2011 .

[27]  Hong-Chan Chang,et al.  Application of differential evolution to passive shunt harmonic filter planning , 1998, 8th International Conference on Harmonics and Quality of Power. Proceedings (Cat. No.98EX227).

[28]  Aslan Deniz Karaoglan,et al.  Optimal Design of C-type Passive Filters Based on Response Surface Methodology for Typical Industrial Power Systems , 2013 .

[29]  B Badrzadeh,et al.  Designing Passive Harmonic Filters for an Aluminum Smelting Plant , 2011, IEEE Transactions on Industry Applications.

[30]  Chi-Jui Wu,et al.  Design of harmonic filters using combined feasible direction method and differential evolution , 2004, 2004 International Conference on Power System Technology, 2004. PowerCon 2004..

[31]  Ying-Yi Hong,et al.  Optimal passive filter planning considering probabilistic parameters using cumulant and adaptive dynamic clone selection algorithm , 2013 .

[32]  Mohammad Mohammadi,et al.  Bacterial foraging optimization and adaptive version for economically optimum sitting, sizing and harmonic tuning orders setting of LC harmonic passive power filters in radial distribution systems with linear and nonlinear loads , 2015, Appl. Soft Comput..

[33]  Walmir Freitas,et al.  An Investigation on the Selection of Filter Topologies for Passive Filter Applications , 2009 .

[34]  M. H. Hocaoglu,et al.  Effects of Source Voltage Harmonics on Power Factor Compensation in AC Chopper Circuits , 2008 .

[35]  Ramesh C. Bansal,et al.  A Digital Signal Processor Based Performance Evaluation of Three-phase Four-wire Shunt Active Filter for Harmonic Elimination, Reactive Power Compensation, and Balancing of Non-linear Loads under Non-ideal Mains Voltages , 2012 .

[36]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[37]  Mehrdad Tamiz,et al.  Multi-objective meta-heuristics: An overview of the current state-of-the-art , 2002, Eur. J. Oper. Res..