Investigation on Flow Characteristics of Pump-Turbine Runners With Large Blade Lean

[1]  Gabriele D'Ippolito,et al.  The Influence of Blade Lean on Straight and Annular Turbine Cascade Flow Field , 2011 .

[2]  Chirag Trivedi,et al.  Numerical Techniques Applied to Hydraulic Turbines: A Perspective Review , 2016 .

[3]  M. Yamabe,et al.  Improvement of Hysteresis Characteristics of Francis Pump-Turbines When Operated as Turbine , 1972 .

[4]  L. Tan,et al.  Turbulent flow simulation using large eddy simulation combined with characteristic-based split scheme , 2014 .

[5]  Yuekun Sun,et al.  Pressure fluctuations in the vaneless space of High-head pump-turbines—A review , 2015 .

[6]  Thomas Staubli,et al.  Unstable Characteristics and Rotating Stall in Turbine Brake Operation of Pump-Turbines , 2011 .

[7]  Torbjørn K. Nielsen,et al.  Dependency on Runner Geometry for Reversible-Pump Turbine Characteristics in Turbine Mode of Operation , 2012 .

[8]  John D. Denton,et al.  The exploitation of three-dimensional flow in turbomachinery design , 1998 .

[9]  Kong Fanyu,et al.  Effects of the Radial Gap Between Impeller Tips and Volute Tongue Influencing the Performance and Pressure Pulsations of Pump as Turbine , 2014 .

[10]  Shuliang Cao,et al.  Numerical study on characteristics of unsteady flow in a centrifugal pump volute at partial load condition , 2015 .

[11]  François Avellan,et al.  Advanced Instrumentation for Measuring Fluid-Structure Coupling Phenomena in the Guide Vanes Cascade of a Pump-Turbine Scale Model , 2010 .

[12]  Ruofu Xiao,et al.  Multiobjective Optimization Design of a Pump-Turbine Impeller Based on an Inverse Design Using a Combination Optimization Strategy , 2014 .

[13]  Hiroshi Tanaka,et al.  Vibration Behavior and Dynamic Stress of Runners of Very High Head Reversible Pump-turbines , 2011 .

[14]  Mehrdad Zangeneh,et al.  On the Coupling of Inverse Design and Optimization Techniques for the Multiobjective, Multipoint Design of Turbomachinery Blades , 2009 .

[15]  Akira Goto,et al.  On the Design Criteria for Suppression of Secondary Flows in Centrifugal and Mixed Flow Impellers , 1997 .

[16]  U Seidel,et al.  Numerical simulation of hydrodynamics in a pump-turbine at off-design operating conditions in turbine mode , 2012 .

[17]  J. H. Wagner,et al.  Turbine Rotor-Stator Interaction , 1982 .

[18]  X H Wang,et al.  Full 3-D viscous optimization design of a reversible pump turbine runner , 2013 .

[19]  M. Zangeneh,et al.  A compressible three‐dimensional design method for radial and mixed flow turbomachinery blades , 1991 .

[20]  Ilmar F. Santos,et al.  Frequencies in the Vibration Induced by the Rotor Stator Interaction in a Centrifugal Pump Turbine , 2007 .

[21]  S. Harrison,et al.  The influence of blade lean on turbine losses , 1990 .

[22]  Eduard Egusquiza,et al.  Failure investigation of a large pump-turbine runner , 2012 .

[23]  Giovanna Cavazzini,et al.  Analysis of the Unstable Behavior of a Pump-Turbine in Turbine Mode: Fluid-Dynamical and Spectral Characterization of the S-shape Characteristic , 2016 .

[24]  F. Visser,et al.  Demonstration and Validation of a 3D CFD Simulation Tool Predicting Pump Performance and Cavitation for Industrial Applications , 2011 .

[25]  Shouqi Yuan,et al.  Experimental Characterization of a Pump–Turbine in Pump Mode at Hump Instability Region , 2015 .

[26]  Young-Do Choi,et al.  Design of a Pump-Turbine Based on the 3D Inverse Design Method , 2015 .

[27]  Daqing Qin,et al.  Flow Similarity in the Rotor–Stator Interaction Affected Region in Prototype and Model Francis Pump-Turbines in Generating Mode , 2016 .

[29]  Shuliang Cao,et al.  Optimization design of a reversible pump–turbine runner with high efficiency and stability , 2015 .

[30]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..