High Temperature Corrosion and Mechanical Properties of TiC-AlSi12 Composite Coating Fabricated on Ti-6Al-4V Alloy Substrate via High-Energy Mechanical Alloying Method

[1]  S. Xin,et al.  Formation mechanism of interdiffusion layer and mechanical properties of Al0.6CoCrFeNi high-entropy alloy/Ti composites , 2023, Journal of Alloys and Compounds.

[2]  Yifu Shen,et al.  Enhanced mechanical and anticorrosion properties in cryogenic friction stir processed duplex stainless steel , 2022, Materials & Design.

[3]  Liaqat Ali Shah,et al.  The role of pin eccentricity in friction stir welding of Al-Mg-Si alloy sheets: microstructural evolution and mechanical properties , 2022, The International Journal of Advanced Manufacturing Technology.

[4]  Yan-rong Zhang,et al.  Evolution in microstructure and high-temperature oxidation behaviors of the laser-cladding coatings with the Si addition contents , 2020 .

[5]  Yifu Shen,et al.  Microstructures and properties of TiCp/Al coating synthesized on Ti–6Al–4V alloy substrate using mechanical alloying method , 2020 .

[6]  N. Herlin‐Boime,et al.  Oxygen incorporated during deposition determines the crystallinity of magnetron-sputtered Ta3N5 films , 2019, Thin Solid Films.

[7]  Tiangang Zhang,et al.  Effects of CeO2 on microstructure and properties of TiC/Ti2Ni reinforced Ti-based laser cladding composite coatings , 2019, Optics and Lasers in Engineering.

[8]  Shihong Zhang,et al.  Effects of multi-layer structure on microstructure, wear and erosion performance of the Cr/CrN films on Ti alloy substrate , 2019, Applied Surface Science.

[9]  M. Bermingham,et al.  Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application , 2019, Materials Science and Engineering: A.

[10]  Y. Mazaheri,et al.  Development of Cu-TiO2 surface nanocomposite by friction stir processing: Effect of pass number on microstructure, mechanical properties, tribological and corrosion behavior , 2019, Journal of Alloys and Compounds.

[11]  Gaoqiang Xu,et al.  Fabrication of SiO2 nanoparticles incorporated coating onto titanium substrates by the micro arc oxidation to improve the wear resistance , 2019, Surface and Coatings Technology.

[12]  Jiaolong Liu,et al.  Corrosion characteristics of Fe3Si intermetallic coatings prepared by molten salt infiltration in sulfuric acid solution , 2019, Journal of Alloys and Compounds.

[13]  V. Migonney,et al.  Review of titanium surface modification techniques and coatings for antibacterial applications. , 2019, Acta biomaterialia.

[14]  W. Dow,et al.  Influence of additives on electroplated copper films and their solder joints , 2019, Materials Characterization.

[15]  Suprianto Suprianto,et al.  Investigation of W-Ti ODS coating on SUS304 steel fabricated by mechanical alloying technique , 2018, Surface and Coatings Technology.

[16]  Chun-liang Chen,et al.  Study of W-Co ODS coating on stainless steels by mechanical alloying , 2018, Surface and Coatings Technology.

[17]  Fuqiang Liu,et al.  Al-TiC in situ composite coating fabricated by low power pulsed laser cladding on AZ91D magnesium alloy , 2018 .

[18]  Lai‐Chang Zhang,et al.  Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding , 2018 .

[19]  Yifu Shen,et al.  Synthesis of Al–B4C composite coating on Ti–6Al–4V alloy substrate by mechanical alloying method , 2017 .

[20]  Yifu Shen,et al.  A comparative investigation on bi-layer Al–Cr/Al–Si coating and mono-layer Al–Cr–Si coating synthesized on Ti–6Al–4V alloy substrate by mechanical alloying method , 2017 .

[21]  S. Qu,et al.  Effects of the different frequencies and loads of ultrasonic surface rolling on surface mechanical properties and fretting wear resistance of HIP Ti-6Al-4V alloy , 2016 .

[22]  Hejun Li,et al.  Mechanical and oxidation protective properties of SiC nanowires-toughened SiC coating prepared in-situ by a CVD process on C/C composites , 2016 .

[23]  I. Dinaharan,et al.  Effect of ceramic particulate type on microstructure and properties of copper matrix composites synthesized by friction stir processing , 2016 .

[24]  A. H. Battez,et al.  Wettability and corrosion of [NTf2] anion-based ionic liquids on steel and PVD (TiN, CrN, ZrN) coatings , 2016 .

[25]  G. A. El-Awadi,et al.  Hot corrosion behavior of Ni based Inconel 617 and Inconel 738 superalloys , 2016 .

[26]  H. Liao,et al.  Wear behavior and microstructure of hypereutectic Al-Si alloys prepared by selective laser melting , 2016 .

[27]  Ye-hua Jiang,et al.  Microstructure and high temperature oxidation resistance of in-situ synthesized TiN/Ti3Al intermetallic composite coatings on Ti6Al4V alloy by laser cladding process , 2016 .

[28]  Rui Vilar,et al.  Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy , 2011 .

[29]  C. A. Nunes,et al.  Evaluation of Ti3Si Phase Stability from Heat-Treated, Rapidly Solidified Ti-Si Alloys , 2010 .

[30]  A. Kruglov,et al.  Processing properties of nano- and submicro-crystalline Ti–6Al–4V titanium alloy , 2009 .

[31]  C. Monticelli,et al.  Triboelectrochemical behaviour of a Si3N4-TiN ceramic composite and a titanium alloy commonly used in biomedical applications , 2009 .

[32]  C. Leyens,et al.  Titanium and titanium alloys : fundamentals and applications , 2005 .

[33]  I. Barin.  Thermochemical data of pure substances , 1989 .