Effects of Cathode Inlet Relative Humidity on PEMFC Durability during Startup–Shutdown Cycling II. Diagnostic Study

[1]  L. J. Bregoli,et al.  A Reverse-Current Decay Mechanism for Fuel Cells , 2005 .

[2]  Tomoki Akita,et al.  Characteristics of a Platinum Black Catalyst Layer with Regard to Platinum Dissolution Phenomena in a Membrane Electrode Assembly , 2006 .

[3]  Hubert A. Gasteiger,et al.  Effect of Relative Humidity on Oxygen Reduction Kinetics in a PEMFC , 2005 .

[4]  In-Hwan Oh,et al.  Effects of Cathode Inlet Relative Humidity on PEMFC Durability during Startup–Shutdown Cycling I. Electrochemical Study , 2010 .

[5]  David L. Wood,et al.  PEM fuel cell electrocatalyst durability measurements , 2006 .

[6]  Hubert A. Gasteiger,et al.  Instability of Pt ∕ C Electrocatalysts in Proton Exchange Membrane Fuel Cells A Mechanistic Investigation , 2005 .

[7]  James M. Fenton,et al.  Investigation of platinum oxidation in PEM fuel cells at various relative humidities , 2007 .

[8]  In-Hwan Oh,et al.  Development of a Durable PEMFC Startup Process by Applying a Dummy Load I. Electrochemical Study , 2009 .

[9]  F. de Bruijn,et al.  Review: Durability and Degradation Issues of PEM Fuel Cell Components , 2008 .

[10]  Yuyan Shao,et al.  Electrochemical durability investigation of single-walled and multi-walled carbon nanotubes under potentiostatic conditions , 2008 .

[11]  Suli Wang,et al.  FT-IR study of the microstructure of Nafion ® membrane , 2004 .

[12]  M. Peuckert,et al.  Characterization of oxidized platinum surfaces by X-ray photoelectron spectroscopy , 1984 .

[13]  Thomas F. Fuller,et al.  PEM Fuel Cell Pt ∕ C Dissolution and Deposition in Nafion Electrolyte , 2007 .

[14]  Hui Li,et al.  PEM fuel cell relative humidity (RH) and its effect on performance at high temperatures , 2008 .

[15]  L. Keer,et al.  A 3D EHL Simulation of CMP Theoretical Framework of Modeling , 2005 .

[16]  K. Sasaki,et al.  Stabilization of Platinum Oxygen-Reduction Electrocatalysts Using Gold Clusters , 2007, Science.

[17]  Xuan Cheng,et al.  Catalyst Microstructure Examination of PEMFC Membrane Electrode Assemblies vs. Time , 2004 .

[18]  A. Vahidi,et al.  A review of the main parameters influencing long-term performance and durability of PEM fuel cells , 2008 .

[19]  S. Choi,et al.  Influence of Sn content on PtSn/C catalysts for electrooxidation of C1–C3 alcohols: Synthesis, characterization, and electrocatalytic activity , 2008 .

[20]  Jae Hong Kim,et al.  Development of a Durable PEMFC Start-Up Process by Applying a Dummy Load II. Diagnostic Study , 2010 .

[21]  T. Barr.  An ESCA study of the termination of the passivation of elemental metals , 1978 .

[22]  H. Gasteiger,et al.  Structure and Chemical Composition of a Supported Pt-Ru Electrocatalyst for Methanol Oxidation , 1995 .

[23]  Edward F. Holby,et al.  Instability of Supported Platinum Nanoparticles in Low-Temperature Fuel Cells , 2007 .

[24]  Geping Yin,et al.  Understanding and Approaches for the Durability Issues of Pt-Based Catalysts for PEM Fuel Cell , 2007 .

[25]  Svein Sunde,et al.  Carbon Corrosion of a PEMFC During Shut-down/Start-up when Using an Air Purge Procedure , 2008 .

[26]  Karren L. More,et al.  Microstructural Changes of Membrane Electrode Assemblies during PEFC Durability Testing at High Humidity Conditions , 2005 .

[27]  F. Maillard,et al.  Detection of Pt z + Ions and Pt Nanoparticles Inside the Membrane of a Used PEMFC , 2007 .

[28]  Mahlon Wilson,et al.  Scientific aspects of polymer electrolyte fuel cell durability and degradation. , 2007, Chemical reviews.

[29]  Robert M. Darling,et al.  Kinetic Model of Platinum Dissolution in PEMFCs , 2003 .