A state of the art review of evaporative cooling systems for building applications

Building sector accounts for more than 60% of total energy consumption in the world while the share of domestic buildings is about 20–40%. The energy consumed is mostly utilised for heating, cooling and ventilation purposes. The energy efficiency of buildings is of prime concern for an occupant who wants to make energy saving especially in HVAC sector. In this instance, it is essential to focus on energy efficient technologies and solutions not only in new buildings but also in existing buildings. One of the energy efficient technologies is evaporative cooling system which is very suitable especially for hot and dry climatic conditions. In this paper, a thorough review of evaporative cooling technologies and their building applications is presented. Evaporative cooling is a novel technology that supplies cool air to the occupants as well as providing a promising way to reduce carbon emissions and energy consumption. Evaporative cooling is a concept that is defined as making air cool via increasing its water vapour content. In other words, air becomes cooler while its humidity level increases. The results show that the evaporative cooling systems have a great potential to save energy in hot and arid climatic zones. It also seems that this novel solution is a very cost effective way compared to the alternative air-conditioning applications.

[1]  C. Blumstein,et al.  The energy saving potential of precooling incoming outdoor air by indirect evaporative cooling , 1992 .

[2]  Dorota Chwieduk,et al.  Towards sustainable-energy buildings , 2003 .

[3]  Brian Ford,et al.  Cooling without air conditioning , 1998 .

[4]  Saffa Riffat,et al.  Comparative study of heat and mass exchanging materials for indirect evaporative cooling systems , 2008 .

[5]  Robert F. Boehm,et al.  Passive building energy savings: A review of building envelope components , 2011 .

[6]  E. Velasco Gómez,et al.  Description and experimental results of a semi-indirect ceramic evaporative cooler , 2005 .

[7]  M. Goldsworthy,et al.  Optimisation of a desiccant cooling system design with indirect evaporative cooler , 2011 .

[8]  Luis Pérez-Lombard,et al.  A review on buildings energy consumption information , 2008 .

[9]  Frédéric Magoulès,et al.  A review on the prediction of building energy consumption , 2012 .

[10]  Jesús M. Zamarreño,et al.  Prediction of hourly energy consumption in buildings based on a feedback artificial neural network , 2005 .

[11]  Zhang Huan,et al.  Enhanced performance of air-cooled chillers using evaporative cooling , 2000 .

[12]  Malcolm J. Cook,et al.  Application of Passive Downdraught Evaporative Cooling (PDEC) to non-domestic buildings , 1997 .

[13]  Saffa Riffat,et al.  Performance of porous ceramic evaporators for building cooling application , 2003 .

[14]  Hisham Ettouney,et al.  A Novel Air Conditioning System: Membrane Air Drying and Evaporative Cooling , 2000 .

[15]  Shailesh Kumar,et al.  An experimental study of a novel dew point evaporative cooling system , 2010 .

[16]  Francis W.H. Yik,et al.  Predicting air-conditioning energy consumption of a group of buildings using different heat rejection methods , 2001 .

[17]  Rahman Saidur,et al.  Energy consumption, energy savings, and emission analysis in Malaysian office buildings , 2009 .

[18]  Mehmet Kanoglu,et al.  Energy and exergy analyses of an experimental open-cycle desiccant cooling system. , 2004 .

[19]  Saffa Riffat,et al.  Toward aerogel based thermal superinsulation in buildings: A comprehensive review , 2014 .

[20]  Shailesh Kumar,et al.  Numerical study of a novel dew point evaporative cooling system , 2010 .

[21]  Constantinos A. Balaras,et al.  Heating energy consumption and resulting environmental impact of European apartment buildings , 2005 .

[22]  Frank Bruno,et al.  On-site experimental testing of a novel dew point evaporative cooler , 2011 .

[23]  Li Nianping,et al.  Principles of exergy analysis in HVAC and evaluation of evaporative cooling schemes , 2002 .

[24]  Xiaoli Li,et al.  This article has been accepted for publication in a future issue of this journal, but has not been fully edited. Content may change prior to final publication. 1 Classification of Energy Consumption in Buildings with Outlier Detection , 2022 .

[25]  Donal Finn,et al.  Indirect evaporative cooling potential in air-water systems in temperate climates , 2003 .

[26]  Hisham Ettouney,et al.  Performance analysis of two-stage evaporative coolers , 2004 .

[27]  Erdem Cuce,et al.  A comprehensive review on solar cookers , 2013 .

[28]  Akira Hoyano,et al.  Experimental study of cooling effects of a passive evaporative cooling wall constructed of porous ceramics with high water soaking-up ability , 2010 .

[29]  Sanjeev Jain,et al.  Energy savings in a building using regenerative evaporative cooling , 2011 .

[30]  Eduardo L. Krüger,et al.  Effectiveness of indirect evaporative cooling and thermal mass in a hot arid climate , 2010 .

[31]  Francis Allard,et al.  Modeling of water spray evaporation: Application to passive cooling of buildings , 2006 .

[32]  M. K. Ghosal,et al.  Modeling and experimental validation of a greenhouse with evaporative cooling by moving water film over external shade cloth , 2003 .

[33]  A. Hepbasli,et al.  Thermodynamic performance assessment of a novel air cooling cycle: Maisotsenko cycle , 2011 .

[34]  Pinar Mert Cuce,et al.  A comprehensive review of heat recovery systems for building applications , 2015 .

[35]  Xudong Zhao,et al.  Numerical study of a M-cycle cross-flow heat exchanger for indirect evaporative cooling , 2011 .

[36]  Haji Hassan Masjuki,et al.  Exergy Analysis of Evaporative Cooling for Reducing Energy Use in a Malaysian Building , 2007 .

[37]  Ammar Bouchair,et al.  Passive cooling by evapo-reflective roof for hot dry climates , 2004 .

[38]  Shahram Delfani,et al.  Energy saving potential of an indirect evaporative cooler as a pre-cooling unit for mechanical cooling systems in Iran , 2010 .

[39]  Shahram Delfani,et al.  Experimental investigation of two-stage indirect/direct evaporative cooling system in various climatic conditions , 2009 .

[40]  Ebrahim Hajidavalloo,et al.  Application of evaporative cooling on the condenser of window-air-conditioner , 2007 .

[41]  K. Nagano,et al.  Experimental study of the performance of porous materials to moderate the roof surface temperature by its evaporative cooling effect , 2009 .

[42]  G. P. Maheshwari,et al.  Energy-saving potential of an indirect evaporative cooler , 2001 .