Piezoresistive in-situ strain sensing of composite laminate structures

Abstract Various methods have been developed to monitor the health and strain state of carbon fiber reinforced polymers, each with a unique set of pros and cons. This research assesses the use of piezoresistive sensors for in situ strain measurement of carbon fiber and other composite structures in multidirectional laminates. The piezoresistive sensor material and the embedded circuitry are both evaluated. For the piezoresistive sensor, a conductive nickel nanocomposite sensor is compared with the piezoresistivity of the carbon fiber itself. For the circuit, the use of carbon fibers already present in the structure is compared with the use of nickel coated carbon fiber. Successful localized strain sensing is demonstrated for several sensor and circuitry configurations. Numerous engineering applications are possible in the ever-growing field of carbon-composites.

[1]  Giant piezoresistivity of nanocomposites with the tunnel conductivity , 2009 .

[2]  D.D.L. Chung,et al.  Continuous carbon fibre epoxy-matrix composite as a sensor of its own strain , 1996 .

[3]  Marcias Martinez,et al.  Structural health monitoring of bonded composite repairs – A critical comparison between ultrasonic Lamb wave approach and surface mounted crack sensor approach , 2013 .

[4]  Oliver K. Johnson,et al.  Multiscale Model for the Extreme Piezoresistivity in Silicone/Nickel Nanostrand Nanocomposites , 2011 .

[5]  David T. Fullwood,et al.  Strain monitoring of carbon fiber composite via embedded nickel nano-particles , 2012 .

[6]  W. Lee,et al.  Self-sensing and dispersive evaluation of single carbon fiber/carbon nanotube (CNT)-epoxy composites using electro-micromechanical technique and nondestructive acoustic emission , 2008 .

[7]  D.D.L. Chung,et al.  Self-monitoring of fatigue damage and dynamic strain in carbon fiber polymer-matrix composite , 1998 .

[8]  Seung-Hwan Chang,et al.  In situ monitoring of the strain evolution and curing reaction of composite laminates to reduce the thermal residual stress using FBG sensor and dielectrometry , 2013 .

[9]  Constantinos Soutis,et al.  Damage monitoring and analysis of composite laminates with an open hole and adhesively bonded repairs using digital image correlation , 2013 .

[11]  D.D.L. Chung,et al.  Strain sensing using carbon fiber , 1999 .

[12]  Phil E. Irving,et al.  The electrical resistance response of continuous carbon fibre composite laminates to mechanical strain , 2004 .

[13]  Mitsuhiro Katayama,et al.  Four-point probe resistance measurements using PtIr-coated carbon nanotube tips. , 2007, Nano letters.

[14]  Charles J. Reedy,et al.  Expedient route to volatile zirconium metal-organic chemical vapor deposition precursors using amide synthons and implementation in yttria-stabilized zirconia film growth , 1999 .

[15]  K. Devries,et al.  Investigation of Electrically Conductive Structural Adhesives using Nickel Nanostrands , 2011 .

[16]  Yihu Song,et al.  Percolation transition and hydrostatic piezoresistance for carbon black filled poly(methylvinylsilioxane) vulcanizates , 2008 .

[17]  Catherine A. Ploskonka,et al.  Fundamentals of Composites Manufacturing: Materials, Methods, and Applications , 1989 .

[18]  Chuck Zhang,et al.  Processing and modeling of conductive thermoplastic/carbon nanotube films for strain sensing , 2008 .

[19]  Jinsong Leng,et al.  Impact source identification in a carbon fiber reinforced polymer plate by using embedded fiber optic acoustic emission sensors , 2014 .

[20]  M. Klüppel,et al.  Mechanical and electrical analysis of carbon black networking in elastomers under strain , 2011 .

[21]  Oliver K. Johnson,et al.  The Colossal Piezoresistive Effect in Nickel Nanostrand Polymer Composites and a Quantum Tunneling Model , 2010 .

[22]  H. F. Brinson,et al.  Resistance-foil strain-gage technology as applied to composite materials , 1984 .