Structural optimization methods and techniques to design light and efficient automatic transmission of vehicles with low radiated noise

This paper discusses design methodologies for automatic transmission of vehicles to achieve light weight and low radiated noise. Light weight design is a fundamental requirement for protecting the environment and improving fuel economy. In addition, quietness is another requirement for comfortable drive. However, in the design of automatic transmission, these two requirements are usually in trade-off relationship and engineers spend a long time to reach a desired design. This paper deals with the design approaches using structural optimization method for minimizing the radiation noise and the mass of automatic transmission. The weakly coupled analysis of elastic and acoustic problem are considered for evaluating the radiated noise problem, where the modal frequency analysis is first solved using the finite element method and the acoustic problem for computing a noise radiated from the surface of the automatic transmission is then solved using the boundary element method. Three different structural optimization methods, topometry, topography and freeform optimization, are applied for the design of outer casing of automatic transmission. The optimization results show that the optimization methods successfully found the light weight and low radiated noise design of outer case, and can be used at the early stage of the design process of automatic transmissions. The freeform optimization gives better solution compared with the result of topography optimization from the standpoint of the sound pressure reduction effect while the mass reduction effect is reduced in freeform optimization to satisfy the sound pressure constraint.

[1]  Martin P. Bendsøe,et al.  An interpretation for min-max structural design problems including a method for relaxing constraints , 1984 .

[2]  Hideyuki Azegami,et al.  Irregularity Of Shape Optimization Problems AndAn Improvement Technique , 1970 .

[3]  ShojaeeSaeed,et al.  Piecewise constant level set method for structural topology optimization with MBO type of projection , 2011 .

[4]  Garret N. Vanderplaats,et al.  Saving Energy Through Design Optimization , 2003 .

[5]  M. Wang,et al.  Piecewise constant level set method for structural topology optimization , 2009 .

[6]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[7]  Raphael T. Haftka,et al.  Preliminary design of composite wings for buckling, strength and displacement constraints , 1979 .

[8]  Raphael T. Haftka,et al.  Preliminary design of composite wings for buckling, strength and displacement constraints , 1978 .

[9]  G. Vanderplaats.  Approximation concepts for numerical airfoil optimization , 1979 .

[10]  S. Yamasaki,et al.  Heaviside projection based topology optimization by a PDE-filtered scalar function , 2011 .

[11]  Yang Dai,et al.  A Topographically Structural Optimization Methodology for Improving Noise Radiation in Transaxles , 2007 .

[12]  R. Citarellaa,et al.  Modal acoustic transfer vector approach in a FEM – BEM vibro-acoustic analysis , 2007 .

[13]  M. E. Botkin,et al.  Structural shape optimization with geometric description and adaptive mesh refinement , 1985 .

[14]  R. Citarella,et al.  Modal acoustic transfer vector approach in a FEM–BEM vibro-acoustic analysis , 2007 .

[15]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[16]  LiZhe,et al.  Design of Compliant Mechanisms , 2001 .

[17]  Joachim Bös,et al.  Numerical optimization of the thickness distribution of three-dimensional structures with respect to their structural acoustic properties , 2006 .

[18]  Stephen R Reid,et al.  Preliminary design of composite riser stress joints , 2001 .

[19]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[20]  L. A. Schmit,et al.  Some approximation concepts for structural synthesis , 1973 .

[21]  V. Braibant,et al.  Structural optimization: A new dual method using mixed variables , 1986 .

[22]  Garret N. Vanderplaats,et al.  Multidiscipline Design Optimization , 1988 .

[23]  Martin Ochmann,et al.  Boundary Element Acoustics Fundamentals and Computer Codes , 2002 .

[24]  M. Imam.  Three‐dimensional shape optimization , 1982 .

[25]  G. Allaire,et al.  Structural optimization using sensitivity analysis and a level-set method , 2004 .

[26]  Noboru Kikuchi,et al.  Adaptive finite element methods for shape optimization of linearly elastic structures , 1986 .

[27]  G. Allaire,et al.  A level-set method for shape optimization , 2002 .

[28]  Brian C. Watson,et al.  Reduction of Mass and Sound Pressure for Automatic Transmission Using Topography Optimization , 2012 .

[29]  Takayuki Yamada,et al.  A topology optimization method based on the level set method incorporating a fictitious interface energy , 2010 .

[30]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[31]  G. W. Reddien,et al.  Projection Methods , 2021, Introduction to the Numerical Solution of Markov Chains.

[32]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[33]  L. Schmit,et al.  Some Approximation Concepts for Structural Synthesis , 1974 .

[34]  Ole Sigmund,et al.  On projection methods, convergence and robust formulations in topology optimization , 2011, Structural and Multidisciplinary Optimization.

[35]  Brian C. Watson,et al.  Structural Optimization Method and Techniques to Reduce Radiation Noise , 2011 .

[36]  Juan Pablo Leiva,et al.  Topometry Optimization: A New Capability to Perform Element by Element Sizing Optimization of Structures , 2004 .