Calibration of force extension and force degradation characteristics of orthodontic latex elastics.

The force-extension characteristics of orthodontic elastics made of natural rubber latex by 4 manufacturers were subjected to static testing under dry and wet conditions. The elastics consisted of 3 sizes: 3/16, 1/4, and 5/16 inch lumen sizes, each with forces specified according to the standard extension index of three times the lumen diameter. Most of the elastics did not match the specified index using the dry tests, but this should not be a serious clinical concern as all elastics showed acceptable regularity of force-extension characteristics. There was notable force degradation of all elastics when subject to water immersion, approximating 30% during the hour, but with an average less than 7% further loss up to 3 days. There were significant differences in force extension and force degradation characteristics between different extensions and force magnitudes for the elastics of the different manufacturers. It is suggested that the clinician could use the table of force degradation values for different extensions to select an appropriate elastic.

[1]  Russell C. Wheeler,et al.  Dental anatomy, physiology, and occlusion , 1974 .

[2]  K. Kataoka,et al.  Biomedical Applications of Polymeric Materials , 1993 .

[3]  Frank Paulich.  Measuring of orthodontic forces , 1939 .

[4]  H. Droschl,et al.  Forces produced by orthodontic elastics as a function of time and distance extended. , 1986, European journal of orthodontics.

[5]  M. Ash,et al.  Wheeler's Dental Anatomy, Physiology and Occlusion , 1992 .

[6]  Ware Al.  A survey of elastics for control of tooth movement. 1. General properties. , 1970 .

[7]  W. Barrie,et al.  Elastics—Their Properties and Clinical Applications in Orthodontic Fixed Appliance Therapy , 1974, British journal of orthodontics.

[8]  A. Caputo,et al.  Force-extension characteristics of orthodontic elastics. , 1977, American journal of orthodontics.

[9]  W. Bell.  A study of applied force as related to the use of elastics and coil springs. , 1951, The Angle orthodontist.

[10]  A. K. Wong.  Orthodontic elastic materials. , 2009, The Angle orthodontist.

[11]  Fred W. Billmeyer,et al.  Textbook Of Polymer Science , 1971 .

[12]  I. E. Ruyter,et al.  Physical and Chemical Aspects Related to Substances Released from Polymer Materials in an Aqueous Environment , 1995 .

[13]  G. Andreasen,et al.  A comparison of time related forces between plastic alastiks and latex elastics. , 1970, The Angle orthodontist.

[14]  Ranga Komanduri,et al.  The nature and properties of engineering materials , 1959 .

[15]  W. Fiddler,et al.  Nitrosamines in rubber bands used for orthodontic purposes. , 1992, Food and chemical toxicology : an international journal published for the British Industrial Biological Research Association.

[16]  J. Wataha,et al.  The effect of repeated stretching on the force decay and compliance of vulcanized cis-polyisoprene orthodontic elastics. , 1993, Dental materials : official publication of the Academy of Dental Materials.

[17]  H. Nishimaki,et al.  [Degradation of orthodontic elastics]. , 1967, Nihon Kyosei Shika Gakkai zasshi = The journal of Japan Orthodontic Society.

[18]  G. Andreasen,et al.  Comparison of alastik chains of elastics involved with intra-arch molar-to-molar forces. , 1970, American journal of orthodontics.

[19]  E H Hixon,et al.  On force and tooth movement. , 1970, American journal of orthodontics.