Reliable estimation of virtual source position for SAFT imaging

The synthetic aperture focusing technique (SAFT), employing a scanned focused transducer as a virtual source, is commonly used to image flaws in immersion testing. The position of a virtual source is estimated from rays emitted from the rim of a focused transducer. However, it is often found that the virtual source position cannot be uniquely determined because of severe focal spot aberration at the focal zone. Based on an analysis of the energy radiated from the focused transducer and the refracted energy varied with the incident angle of ultrasound, we propose that paraxial rays emitted from the focused transducer are the best for estimating the position of a virtual source for incorporation into SAFT. This study results also shows that by using this simple virtual source position estimation for SAFT, the axial resolution and SNR of the reconstructed image can be greatly improved. This new approach minimizes the effect of such factors as refraction at high-velocity-contrast interfaces, distance of the transducer to the couplant-specimen interface, and the focal length of a focused transducer, which may cause focal spot aberration resulting in decreased sensitivity in SAFT imaging.

[1]  M. Bae,et al.  A study of synthetic-aperture imaging with virtual source elements in B-mode ultrasound imaging systems. , 2000, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.

[2]  Lihong V. Wang,et al.  Functional photoacoustic microscopy for high-resolution and noninvasive in vivo imaging , 2006, Nature Biotechnology.

[3]  Young-Fo Chang,et al.  Angle Beam Shear Wave Nondestructive Testing , 2005 .

[4]  Helmut Ermert,et al.  In vivo imaging of the skin in the 100 MHz region using the synthetic aperture concept , 1995, 1995 IEEE Ultrasonics Symposium. Proceedings. An International Symposium.

[5]  T. W. Spencer,et al.  Reflection and transmission of plane compressional waves , 1965 .

[6]  Taco D. Visser,et al.  Defocusing of a converging electromagnetic wave by a plane dielectric interface , 1996 .

[7]  G. Kino.  Acoustic waves : devices, imaging, and analog signal processing , 1987 .

[8]  J.A. Johnson,et al.  The Effects of Surface Mapping Corrections with Synthetic-Aperture Focusing Techniques on Ultrasonic Imaging , 1983, IEEE Transactions on Sonics and Ultrasonics.

[9]  Peter Török,et al.  Electromagnetic diffraction of light focused through a planar interface between materials of mismatched refractive indices: an integral representation , 1995 .

[10]  Bernhard G. Zagar,et al.  Acoustic Microscopy Technique to Precisely Locate Layer Delamination , 2007, IEEE Transactions on Instrumentation and Measurement.

[11]  Hao Ling,et al.  Focusing of electromagnetic waves through a dielectric interface , 1984 .

[12]  W.D. O'Brien,et al.  Synthetic aperture techniques with a virtual source element , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[13]  Dmr Mitchell,et al.  Ultrasonic Synthetic Aperture Imaging for Correcting the Refraction Artifacts Applied to Angle Beam Immersion Testing , 2006 .

[14]  F. Maier,et al.  Synthetic Aperture Focusing Technique in High - Frequency Ultrasound Imaging to Locate Layer Delamination , 2006, 2006 IEEE Instrumentation and Measurement Technology Conference Proceedings.

[15]  L. G. Garza,et al.  A Digital Image Processing Technique for Quantification of Surface Hot-Shortness Cracks , 2006 .