Sensitivity analysis in oxidation ditch modelling: the effect of variations in stoichiometric, kinetic and operating parameters on the performance indices

This paper demonstrates the application of the factorial sensitivity analysis methodology in studying the influence of variations in stoichiometric, kinetic and operating parameters on the performance indices of an oxidation ditch simulation model (benchmark). Factorial sensitivity analysis investigates the sensitivities in a region rather than in a point. Hence, it has the advantage of giving more information about parameter interactions (non-linearity). Short-term results obtained have shown the following. The index AE is not significantly affected by variations in the value of parameters of the activated sludge model (ASM) No 1. The index TSP is greatly influence by heterotrophic yield (YH), heterotrophic decay (bH) and specific hydrolysis (kh) and the index EQ is dominated by YH, Monod coefficient (KS), bH, kh, anoxic condition correction factors (g, h), hydrolysis half-saturation coefficient (KX), autotrophs maximum specific growth rate (?A) and ammonia half-saturation coefficient (KNH). Furthermore, the index EQ has been shown to be very sensitive to parameter interactions, at certain regions.

[1]  I. Takács.  A dynamic model of the clarification-thickening process , 1991 .

[2]  Ahmed E. Abasaeed.  Sensitivity analysis on a sequencing batch reactor model. II: Effect of stoichiometric and operating parameters , 1999 .

[3]  P. H. M. Janssen,et al.  Assessing Sensitivities and Uncertainties in Models: A Critical Evaluation , 1994 .

[4]  Stefan Weijers,et al.  A procedure for selecting best identifiable parameters in calibrating activated sludge model no. 1 to full-scale plant data , 1997 .

[5]  Karel J. Keesman.  On the dominance of parameters in structural models of ill-defined systems , 1989 .

[6]  K J Keesman,et al.  Parameter estimation procedure for complex non-linear systems: calibration of ASM No. 1 for N-removal in a full-scale oxidation ditch. , 2001, Water science and technology : a journal of the International Association on Water Pollution Research.

[7]  W. Gujer,et al.  A general model for single-sludge wastewater treatment systems , 1987 .

[8]  George E. P. Box,et al.  Empirical Model‐Building and Response Surfaces , 1988 .

[9]  S. Islam,et al.  Evaluation of sensitivity of land surface hydrology representations with and without land–atmosphere feedback , 1997 .

[10]  Gustaf Olsson,et al.  Integration of wastewater treatment plant design and operation - A systematic approach using cost functions , 1996 .

[11]  Ahmed E. Abasaeed.  Sensitivity analysis on a sequencing batch reactor model I. Effect of kinetic parameters , 1997 .

[12]  Jerold W. Jones,et al.  Modeling of an ice-on-coil thermal energy storage system , 1996 .