Investigations on Physical, Mechanical, Thermal, Thermo-mechanical, and Sliding Wear Performance of Ti–AA7075 Alloy Composites Fabricated via High Vacuum Casting Route

[1]  Ashiwani Kumar,et al.  Parametric Optimization and Ranking Analysis of AA2024−Al2O3/AlN Alloy Composites Fabricated Via Stir Casting Route Under Dry Sliding Wear Investigation , 2023, International Journal of Metalcasting.

[2]  Ashiwani Kumar,et al.  Ranking Analysis of AA7075-Cr Alloy Composites Based on Physical, Mechanical, and Sliding wear Assessment Using Hybrid ENTROPY-VIKOR Approach , 2023, International Journal of Metalcasting.

[3]  B. Thomas,et al.  Effect of Load, Sliding Velocity, and Reinforcements on Wear Characteristics of Al7075-Based Composite and Nanocomposites Fabricated by Ultrasonic-Assisted Stir-Casting Technique , 2023, International Journal of Metalcasting.

[4]  M. Surya.  Fabrication, Interlayer Bonding and Mechanical Characterization of Four Layered AA7075/SiC Functionally Graded Material , 2023, Silicon.

[5]  Ashiwani Kumar,et al.  Investigations on Physical, Mechanical and Sliding Wear Assessment of ZA27 -Gr Alloy Composites Using Preference Selection Index Method , 2023, International Journal of Metalcasting.

[6]  Shweta B. Thomas,et al.  Microstructure and Mechanical Characterization of Al6061 Based Composite and Nanocomposites Prepared via Conventional and Ultrasonic-assisted Melt-stirring Techniques , 2022, Materials Today Communications.

[7]  Ashiwani Kumar,et al.  Fracture Toughness and Thermal Investigations of Al 7075 — Cobalt Particulates Reinforced Alloy Composites Prepared Using High Vacuum Casting Method for Gear Applications: Proposed Thermal Conductivity and Fracture Toughness Modeling , 2022, International Journal of Metalcasting.

[8]  Ashiwani Kumar,et al.  Analysis of the Sliding Wear (Experimental and Modeling Validation), Thermal, Thermo-Mechanical, and Fracture Performance of AA7075-Chromium Alloy Composites , 2022, Journal of Bio- and Tribo-Corrosion.

[9]  B. Alobaid.  Microstructure and Mechanical Properties of Ti Particles Reinforced AZ31-Mg Alloy Matrix Composites Through ARB and Subsequent Annealing , 2022, Metallography, Microstructure, and Analysis.

[10]  Ashiwani Kumar,et al.  Parametric Optimization and Ranking Analysis of Hybrid AA2024–SiC/Si3N4 Alloy Composites Based on Mechanical and Sliding Wear Performance , 2021, Journal of Bio- and Tribo-Corrosion.

[11]  Ashiwani Kumar,et al.  Analysis of Mechanical and Sliding Wear Performance of Hybrid AA7075-SiC/Gr/Cu Alloy Composites Fabricated by High Vacuum Stir Casting Process , 2021, Journal of Bio- and Tribo-Corrosion.

[12]  M. Surya.  Effect of SiC Weight Percentage and Sintering Duration on Microstructural and Mechanical Behaviour of Al6061/SiC Composites Produced by Powder Metallurgy Technique , 2021, Silicon.

[13]  Ashiwani Kumar,et al.  Investigations on Mechanical and Sliding Wear Performance of AA7075 ˗ SiC/Marble Dust/Graphite Hybrid Alloy Composites Using Hybrid ENTROPY -VIKOR Method , 2021, Silicon.

[14]  Mukesh Kumar.  Mechanical and Sliding Wear Performance of AA356-Al2O3/SiC/Graphite Alloy Composite Materials: Parametric and Ranking Optimization Using Taguchi DOE and Hybrid AHP-GRA Method , 2020, Silicon.

[15]  I. Dinaharan,et al.  Titanium particulate reinforced AZ31 magnesium matrix composites with improved ductility prepared using friction stir processing , 2020 .

[16]  A. Patnaik,et al.  Tribology Analysis of Cobalt Particulate Filled Al 7075 Alloy for Gear Materials: a Comparative Study , 2018, Silicon.

[17]  A. Patnaik,et al.  Investigation of nickel metal powder on tribological and mechanical properties of Al-7075 alloy composites for gear materials , 2017 .

[18]  J. González,et al.  Effect of Ni content on the microstructure, thermal properties, and morphology of Ni-SiC composites produced by mechanical alloying , 2017 .

[19]  B. Tang,et al.  Sliding tribological characteristics of in-situ dendrite-reinforced Zr-based metallic glass matrix composites in the acid rain , 2016 .

[20]  Di Zhang,et al.  Configuration design and fabrication of laminated titanium matrix composites , 2016 .

[21]  S. Aravindan,et al.  Evaluation of physical and mechanical properties of AZ91D/SiC composites by two step stir casting process , 2015 .

[22]  S. C. Vettivel,et al.  Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites , 2014 .

[23]  H. Assadi,et al.  Effect of applied load on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite , 2013 .

[24]  P. Lakshminarayanan,et al.  Dry sliding wear behaviour of in situ Al–TiB2 composites , 2013 .

[25]  A. Tofigh,et al.  Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying , 2013 .

[26]  I. Dinaharan,et al.  Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites , 2013 .

[27]  R. Kayikci,et al.  Experimental optimization of dry sliding wear behavior of in situ AlB2/Al composite based on Taguchi’s method , 2012 .

[28]  F. Toptan,et al.  Reciprocal dry sliding wear behaviour of B4Cp reinforced aluminium alloy matrix composites , 2012 .

[29]  S. Kumar,et al.  Mechanical properties of SiCp/Al2O3 ceramic matrix composites prepared by directed oxidation of an aluminum alloy , 2012 .

[30]  Rashmi,et al.  Dry sliding wear behaviour of organo-modified montmorillonite filled epoxy nanocomposites using Taguchi’s techniques , 2011 .

[31]  S. Das,et al.  Effect of SiC content and sliding speed on the wear behaviour of aluminium matrix composites , 2011 .

[32]  K. Maniya,et al.  A selection of material using a novel type decision-making method: Preference selection index method , 2010 .

[33]  Sandeep Kumar,et al.  Dry sliding wear behaviour of magnesium alloy based hybrid composites in the longitudinal direction , 2009 .

[34]  M. Gupta,et al.  Improving mechanical performance of Al by using Ti as reinforcement , 2007 .

[35]  Ashiwani Kumar,et al.  Application of preference selection index method in performance based ranking of ceramic particulate (SiO2/SiC) reinforced AA2024 composite materials , 2020, Materials Today: Proceedings.

[36]  D. Khanduja,et al.  Dry sliding wear investigation of Al6082/Gr metal matrix composites by response surface methodology , 2016 .

[37]  N. Radhika,et al.  Analysis of Tribological Behavior of Aluminium/B4C Composite Under Dry Sliding Motion☆ , 2014 .