Techno-economic feasibility of a preoxidation process to enhance prereduction of chromite

society. Virgin chromium (Cr) units used in the manufacturing of stainless steel are obtained from ferrochrome (FeCr) – a relatively crude alloy consisting predominantly of Cr and iron (Fe) (Murthy, Tripathy, and Kumar, 2011; Beukes, van Zyl, and Ras, 2012). FeCr is produced mainly by the carbothermic reduction of chromite ore in submerged arc furnaces (SAFs) and direct current arc furnaces (DCFs) (Neizel et al., 2013; Beukes, Dawson, and van Zyl, 2010; Dwarapudi et al., 2013). The energy required to heat, smelt, and reduce the chromite ore to the metallized state is supplied by electricity (Pan, 2013). FeCr production is an energy-intensive process, with a specific electricity consumption (SEC) varying from 2.4 MWh/t to more than 4.0 MWh/t FeCr produced, depending on the process applied (Pan, 2013; Neizel et al., 2013). Daavittila, Honkaniemi, and Jokinen (2004) stated that the typical operational costs of FeCr smelters can be divided into four categories, i.e. chromite ore (30%), carbonaceous reductant (20%), electricity (30%), and other production costs (20%). This makes electricity consumption the joint largest factor that influences operational costs in FeCr production. Beukes, Dawson, and van Zyl (2010) presented an overview of processes utilized for FeCr production, with specific reference to the South African FeCr industry. However, similar processes are also applied internationally. According to this review, FeCr is produced in:

[1]  Johan P. Beukes,et al.  Theoretical and practical aspects of Cr(VI) in the South African ferrochrome industry , 2010 .

[2]  J. Daavittila,et al.  THE TRANSFORMATION OF FERROCHROMIUM SMELTING TECHNOLOGIES DURING THE LAST DECADES , 2004 .

[3]  J. Beukes,et al.  Cr(VI) Generation During Flaring of CO-Rich Off-Gas from Closed Ferrochromium Submerged Arc Furnaces , 2015, Metallurgical and Materials Transactions B.

[4]  P. Zyl,et al.  Comparison of physical properties of oxidative sintered pellets produced with UG2 or metallurgical-grade South African chromite: A case study , 2015 .

[5]  S. Dwarapudi,et al.  Development of Cold Bonded Chromite Pellets for Ferrochrome Production in Submerged Arc Furnace , 2013 .

[6]  C. C. Ugwuegbu.  Technology Innovations in the Smelting of Chromite Ore , 2012 .

[7]  P. Zyl,et al.  Utilisation of pre-oxidised ore in the pelletised chromite pre-reduction process , 2016 .

[8]  Johan P. Beukes,et al.  Treatment of Cr(VI)-containing wastes in the South African ferrochrome industry - a review of currently applied methods , 2012 .

[9]  C. J. Steenkamp,et al.  Cr(VI) generation during sample preparation of solid samples -A chromite ore case study , 2010 .

[10]  L. R. Cramer,et al.  The impact of platinum production from UG2 ore on ferrochrome production in South Africa , 2004 .

[11]  Michael Hitch,et al.  Economic feasibility and sensitivity analysis of integrating industrial-scale mineral carbonation into mining operations , 2012 .

[12]  O. Naiker,et al.  Xstrata Alloys in Profile , 2006 .

[13]  P. Zyl,et al.  Why is CaCO3 not used as an additive in the pelletised chromite pre-reduction process? , 2013 .

[14]  N. F. Dawson,et al.  Economic modelling of a ferrochrome furnace , 2012 .

[15]  P. Zyl,et al.  Unique challenges of clay binders in a pelletised chromite pre-reduction process. , 2012 .