Distributed-parallel CFD computation for all fuel assemblies in PWR core

Abstract To further understand and monitor the thermal–hydraulic (TH) status of large domain of pressurized water reactor (PWR) core, an applicable engineering approach with high efficiency and high spatial resolution is critical. Traditional engineering computational fluid dynamics (CFD) computation needs too many computing resources to effectively analyze large domain engineering application for PWR core. In this study, a distributed-parallel (DP) CFD scheme is presented. This scheme separates the large domain into some sub-domains in order to optimize computing time and resources. The design completely retains the complex structures and fine-scale CFD mesh. In addition, it also significantly reduces the computing resources and time, and a fine-scale, full-height CFD analysis can be done in hours for all assemblies. Moreover, important design requirements such as energy consumption ratio, relative computing domain, relative assembly number, and the ranking method of important locations are also designed to optimize the applications of DP scheme to satisfy different engineering demands. The performance of the proposed scheme is evaluated using the CFD computation of a representative region from all 121 assemblies in a PWR core. This research serves to advance the development of engineering CFD computation for PWR core.

[1]  Guillaume Ricciardi,et al.  Comparative study of the contribution of various PWR spacer grid components to hydrodynamic and wall pressure characteristics , 2017 .

[2]  Lei Li,et al.  Challenge Analysis and Schemes Design for the CFD Simulation of PWR , 2017 .

[3]  Jinbiao Xiong,et al.  High-fidelity PIV measurement of cross flow in 5 × 5 rod bundle with mixing vane grids , 2019, Nuclear Engineering and Design.

[4]  Deqi Chen,et al.  Thermal–hydraulic performance of a 5 × 5 rod bundle with spacer grid in a nuclear reactor , 2016 .

[5]  Zhijian Zhang,et al.  CFD simulation for the optimal design and utilization of experiment to research the flow process in PWR , 2016 .

[6]  Jinbiao Xiong,et al.  CFD simulation of swirling flow induced by twist vanes in a rod bundle , 2018, Nuclear Engineering and Design.

[7]  Ye Gao,et al.  Methods of simulating large-scale rod bundle and application to a 17 × 17 fuel assembly with mixing vane spacer grid , 2014 .

[8]  Yassin A. Hassan,et al.  Hydraulic Benchmark Data for PWR Mixing Vane Grid , 2013 .

[9]  Young Don Choi,et al.  Phenomenological investigations on the turbulent flow structures in a rod bundle array with mixing devices , 2008 .

[10]  Wenxi Tian,et al.  Development and validation of boron diffusion model in nuclear reactor core subchannel analysis , 2019, Annals of Nuclear Energy.

[11]  Sichao Tan,et al.  Flow visualization and mixing quantification in a rod bundle using laser induced fluorescence , 2016 .

[12]  Qiang Wu,et al.  Research on the Performance of DSP Parallel System , 2013 .

[13]  Jinbiao Xiong,et al.  PIV measurement of turbulent flow downstream of mixing vane spacer grid in 5×5 rod bundle , 2019, Annals of Nuclear Energy.

[14]  Zhijian Zhang,et al.  Research on the Subchannel Analysis Method via CFD Analysis for PWR , 2017 .

[15]  Thomas Höhne,et al.  IAEA CRP benchmark of ROCOM PTS test case for the use of CFD in reactor design using the CFD-Codes ANSYS CFX and TrioCFD , 2018, Nuclear Engineering and Design.

[16]  Michael E. Conner,et al.  Benchmarking Computational Fluid Dynamics for Application to PWR Fuel , 2002 .

[17]  Y. Hassan,et al.  Space and energy-based turbulent scale-resolving simulations of flow in a 5 × 5 nuclear reactor core fuel assembly with a spacer grid , 2018, International Journal of Heat and Fluid Flow.

[18]  Kazuo Ikeda.  CFD application to advanced design for high efficiency spacer grid , 2014 .

[19]  Y. Hassan,et al.  Convergence study and uncertainty quantification of average and statistical PIV measurements in a matched refractive index 5×5 rod bundle with mixing vane spacer grid , 2019, Experimental Thermal and Fluid Science.

[20]  Wenxi Tian,et al.  Numerical study on the turbulent mixing in channel with Large Eddy Simulation (LES) using spectral element method , 2019, Nuclear Engineering and Design.