Multi-factor coupling system characteristic of the dynamic roll gap in the high-speed rolling mill during the unsteady lubrication process

Abstract In the present work, a multi-factor coupling dynamic model of a rolling mill system for a dynamic roll gap during an unsteady lubrication process was developed on the basis of the rolling theory, lubrication and the friction theory, and the mechanical vibration theory. The multi-factor coupling model of interfacial film binding was coupled with the rolling force model, dynamic roll gap interface friction model and work roll movement model. The corresponding distributions of friction and pressure at varying surface roughness and times were systematically analyzed during the unsteady mixed lubrication process. The effects of the main processing parameters on the critical speed and amplitude for self-excited vertical vibration were investigated.

[1]  William R. D. Wilson,et al.  Low speed mixed lubrication of bulk metal forming processes , 1996 .

[2]  John G. Lenard,et al.  The effect of roll roughness and lubricant viscosity on the loads on the mill during cold rolling of steel strips , 2005 .

[3]  Hongchun Li.  A study on wear and surface roughness of work roll in cold rolling , 2008 .

[5]  Hugh Spikes,et al.  The influence of transverse roughness in thin film, mixed elastohydrodynamic lubrication , 2007 .

[6]  Punith Kumar,et al.  Central film thickness formula for shear thinning lubricants in EHL point contacts under pure rolling , 2012 .

[7]  A. Świątoniowski,et al.  Parametrical excitement vibration in tandem mills—mathematical model and its analysis , 2003 .

[8]  Zhengyi Jiang,et al.  Analysis of friction and surface roughness effects on edge crack evolution of thin strip during cold rolling , 2011 .

[9]  M. Salimi,et al.  Development of a mixed film lubrication model in cold rolling , 2006 .

[10]  Vladimir B. Ginzburg,et al.  High-Quality Steel Rolling: Theory and Practice , 1993 .

[11]  H. Christensen.  Stochastic Models for Hydrodynamic Lubrication of Rough Surfaces , 1969 .

[12]  Shi Xiao-lu.  Review of Chatter Studies in Cold Rolling , 2007 .

[13]  Cheng Gang Sun,et al.  Investigation of interfacial behaviors between the strip and roll in hot strip rolling by finite element method , 2005 .

[14]  Jonas Lagergren.  Friction evaluation in hot strip rolling by direct measurement in the roll gap of a model duo mill , 1997 .

[15]  J. G. Beese.  Lubrication of hot-strip-mill rolls , 1973 .

[16]  Anthony G. Atkins.  Hydrodynamic lubrication in cold rolling , 1974 .

[17]  R. C. Hibbeler.  Mechanics of Materials -7/E , 2014 .

[18]  Kornel Ehmann,et al.  A dynamic model of the rolling process. Part I: homogeneous model , 2000 .

[19]  William R. D. Wilson,et al.  Partial Hydrodynamic Lubrication With Large Fractional Contact Areas , 1998 .

[20]  B. Moxley.  Mechanics of materials 4th edition: archie higdon et al. john wiley u.s.a. march 85 744 pp £48.00 isbn: 0-471-89044-8 , 1987 .

[21]  Yan Peng,et al.  Non-Linear Vibration and Stability of Moving Strip with Time-Dependent Tension in Rolling Process , 2010 .

[22]  K. Kang,et al.  Analysis of changes in 3D surface texture anisotropy ratio parameter and friction during sheet rolling campaigns , 2008 .