Structural Properties and Copolycondensation Mechanism of Valonea Tannin-Modified Phenol-formaldehyde Resin

[1]  B. Saake,et al.  Lignins from enzymatic hydrolysis and alkaline extraction of steam refined poplar wood: Utilization in lignin-phenol-formaldehyde resins , 2016 .

[2]  H. Shui,et al.  Effects of bark extraction before liquefaction and liquid oil fractionation after liquefaction on bark-based phenol formaldehyde resoles , 2016 .

[3]  A. Pizzi,et al.  Aningre (Aningeria spp.) tannin extract characterization and performance as an adhesive resin , 2015 .

[4]  A. Pizzi,et al.  Analysis of Valonia Oak (Quercus aegylops) Acorn Tannin and Wood Adhesives Application , 2015 .

[5]  Jizhi Zhang,et al.  Performances of larch (larix gmelini) tannin modified urea–formaldehyde (TUF) resin and plywood bonded by TUF resin , 2014 .

[6]  A. Pizzi,et al.  Matrix-Assisted Laser Desorption-Ionization Time of Flight (MALDI-TOF) Mass Spectrometry of Phenol-Formaldehyde-Chestnut Tannin Resins , 2014 .

[7]  A. Celzard,et al.  Development and Characterisation of Phenolic Foams with Phenol-Formaldehyde-Chestnut Tannins Resin , 2014 .

[8]  A. Pizzi,et al.  Polyurethanes from hydrolysable tannins obtained without using isocyanates , 2014 .

[9]  A. Pizzi,et al.  Phenolic resin adhesives based on chestnut (Castanea sativa) hydrolysable tannins , 2013 .

[10]  A. Pizzi,et al.  Characterization of Pinus brutia bark tannin by MALDI-TOF MS and 13C NMR , 2013 .

[11]  Wei Zhang,et al.  Preparation and properties of lignin–phenol–formaldehyde resins based on different biorefinery residues of agricultural biomass , 2013 .

[12]  Emrah Bulut,et al.  Synthesis and characterization of valonea tannin resin and its interaction with palladium (II), rhodium (III) chloro complexes☆ , 2013 .

[13]  N. Boussetta,et al.  Isolation and characterization of lignin from Moroccan sugar cane bagasse: Production of lignin–phenol-formaldehyde wood adhesive , 2013 .

[14]  N. Yan,et al.  Biobased Phenol Formaldehyde Resins Derived from Beetle-Infested Pine Barks—Structure and Composition , 2013 .

[15]  Wei Zhang,et al.  Lignocellulosic ethanol residue-based lignin–phenol–formaldehyde resin adhesive , 2013 .

[16]  A. Szczurek,et al.  New tannin–lignin aerogels , 2013 .

[17]  M. Yurtsever,et al.  Adsorption and desorption behavior of silver ions onto valonia tannin resin , 2012 .

[18]  C. Xu,et al.  Synthesis of biobased phenolic resins/adhesives with methylolated wood‐derived bio‐oil , 2012 .

[19]  Mustafa Usta,et al.  The efficiency of tannin as a formaldehyde scavenger chemical in medium density fiberboard , 2012 .

[20]  F. Chu,et al.  Effect of Synthesis Conditions on the Structure and Curing Characteristics of High-Urea Content PUF Resin , 2011 .

[21]  A. Szczurek,et al.  The use of tannin to prepare carbon gels. Part I: Carbon aerogels , 2011 .

[22]  M. T. Paridah,et al.  A new source of natural adhesive: Acacia mangium bark extracts co-polymerized with phenol-formaldehyde (PF) for bonding Mempisang (Annonaceae spp.) veneers , 2011 .

[23]  A. Ashori,et al.  Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol–formaldehyde adhesive , 2011 .

[24]  J. Miyazaki,et al.  Effect of the addition of Acacia mangium bark on thermosetting of phenol–formaldehyde resin , 2011, Wood Science and Technology.

[25]  N. Yan,et al.  Characterization of phenol–formaldehyde resins derived from liquefied lodgepole pine barks , 2010 .

[26]  A. Pizzi,et al.  MALDI-TOF and 13C NMR characterization of maritime pine industrial tannin extract , 2010 .

[27]  P. Tahir,et al.  Characterization of Acacia mangium polyflavonoid tannins by MALDI-TOF mass spectrometry and CP-MAS 13C NMR , 2010 .

[28]  L. Karunanayake,et al.  Synthesis, Characterization, and Metal Adsorption Properties of Tannin-Phenol-Formaldehyde Resins Produced Using Tannin from Dried Fruit of Terminalia chebula (Aralu) , 2010 .

[29]  C. Xu,et al.  Synthesis of phenol–formaldehyde resol resins using organosolv pine lignins , 2009 .

[30]  M. T. Paridah,et al.  Fortification of sulfited tannin from the bark of Acacia mangium with phenol–formaldehyde for use as plywood adhesive , 2009 .

[31]  A. Pizzi,et al.  Polymer structure of commercial hydrolyzable tannins by matrix‐assisted laser desorption/ionization‐time‐of‐flight mass spectrometry , 2009 .

[32]  Antonio Pizzi,et al.  Cornstarch and tannin in phenol–formaldehyde resins for plywood production , 2009 .

[33]  Jianzhang Li,et al.  13C‐NMR study on the structure of phenol‐urea‐formaldehyde resins prepared by methylolureas and phenol , 2009 .

[34]  M. Özacar,et al.  Equilibrium and kinetic data, and adsorption mechanism for adsorption of lead onto valonia tannin resin , 2008 .

[35]  J. C. Piter,et al.  Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives. , 2008, Bioresource technology.

[36]  D. Grunwald,et al.  Preparation of phenol–urea–formaldehyde copolymer adhesives under heterogeneous catalysis , 2006 .

[37]  C. Soykan,et al.  Studies on synthesis, characterization, and metal adsorption of mimosa and valonia tannin resins , 2006 .

[38]  Hideyuki Ito,et al.  Oligomeric hydrolyzable tannins from Monochaetum multiflorum. , 2004, Phytochemistry.

[39]  G. Vázquez,et al.  13C-NMR analysis of phenol-urea-formaldehyde prepolymers and phenol-urea-formaldehyde-tannin adhesives , 2004 .

[40]  B. Riedl,et al.  Effects of Pinus pinaster bark extracts content on the cure properties of tannin-modified adhesives and on bonding of exterior grade MDF , 2003 .

[41]  T. Pakkanen,et al.  Effect of alkalinity on the structure of phenol–formaldehyde resol resins , 2001 .

[42]  A. Pizzi,et al.  MALDI-TOF mass spectrometry of polyflavonoid tannins , 2001 .

[43]  I. Mueller-Harvey.  Analysis of hydrolysable tannins , 2001 .

[44]  T. Pakkanen,et al.  IR spectroscopy as a quantitative and predictive analysis method of phenol–formaldehyde resol resins , 1998 .

[45]  T. Pakkanen,et al.  Phenol-formaldehyde resol resins studied by 13C-NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry , 1997 .

[46]  B. Riedl,et al.  Gallic acid as a model of tannins in condensation with formaldehyde , 1996 .