Dynamic analysis of closed high-speed precision press: Modeling, simulation and experiments

To forecast the dynamic responses of closed high-speed precision press accurately, a 3-degree-of-freedom (DOF) dynamic model of mass-spring damping is proposed in this work. This model operates by using the centralized parameter method. Considering the instantaneity of impact load, we employ impulse simulation to simulate the periodic impact working conditions of a JF75G-200 high-speed press using both 2-DOF and 3-DOF models. Simulation data on the dynamic responses of the press are acquired and compared with the results from on-site measuring. The proposed 3-DOF dynamic model of mass-spring damping has been proven by our simulation and test to be reliable as well as effective for detecting the dynamic responses of the press.

[1]  Hui Li,et al.  Seven-bar mechanical press with hybrid-driven mechanism for deep drawing; Part 2: Dynamic modeling and simulation , 2010 .

[2]  Qian Wang,et al.  Design and research of a novel type of mechanical presses driven by three servo motors in parallel , 2013 .

[3]  Milos Novak,et al.  Vibration of hammer foundations , 1983 .

[4]  Ruxu Du,et al.  The Design of a New Metal Forming Press with Controllable Mechanism , 2003 .

[5]  Zhisheng Zhang,et al.  Dynamic modelling and response analysis of closed high-speed press system , 2012 .

[6]  Wen-Hsiang Hsieh,et al.  On a novel press system with six links for precision deep drawing , 2011 .

[7]  Milos Novak,et al.  Foundations for shock-producing machines , 1983 .

[8]  Pei-Lum Tso,et al.  The Study of Dynamic Balancing for High-Speed Presses , 2006 .

[9]  Tony L. Schmitz,et al.  Predicting High-Speed Machining Dynamics by Substructure Analysis , 2000 .

[10]  Weizhong Guo,et al.  Design of mechanical presses driven by multi-servomotor , 2011 .

[11]  Akio Nagamatsu,et al.  Vibration analysis and structural optimization of a press machine , 1993 .

[12]  Kyung Chun Ham,et al.  Kinematical analysis on the several linkage drives for mechanical presses , 2009 .

[13]  M. Hesham El Naggar,et al.  Design of efficient base isolation for hammers and presses , 2003 .

[14]  Hui Li,et al.  Dynamics modeling and simulation of a new nine-bar press with hybrid-driven mechanism , 2008 .

[15]  Ruxu Du,et al.  A New Type of Controllable Mechanical Press: Motion Control and Experiment Validation , 2005 .

[16]  Hui Li,et al.  Seven-bar mechanical press with hybrid-driven mechanism for deep drawing; Part 1: kinematics analysis and optimum design , 2010 .

[17]  Zhisheng Zhang,et al.  A study on kinematics accuracy reliability for high speed press mechanisms , 2009, 2009 International Conference on Mechatronics and Automation.

[18]  Hsing-Juin Lee.  Dynamics and probabilistic fatigue analysis schemes for high-speed press machines , 1994 .

[19]  M. Hesham El Naggar,et al.  Response of block foundations to impact loads , 2004 .

[20]  A A Shabana,et al.  Impact-induced vibration in complex flexible multi-body systems: numerical and experimental investigation of press machines , 2012 .

[21]  Fang Jia,et al.  Non-circular belt transmission design of mechanical press , 2012 .