Facile fabrication of PtNP/MWCNT nanohybrid films for flexible counter electrode in dye-sensitized solar cells

A platinum nanoparticle/multi-wall carbon nanotube (PtNP/MWCNT) hybrid counter electrode (CE) based on a flexible substrate, Ti foil, was prepared for a high performance dye-sensitized solar cell (DSSC) via a facile fabricating route. This flexible nanohybrid CE was established by using a requisite homemade dispersant, consisting of poly(oxyethylene) segment and imide linkage functionalities. MWCNTs were well suspended in an ethanol/water solution in the presence of copolymer dispersant and PtNPs. The solution containing the PtNP/MWCNT (2/1 weight ratio) hybrid was further coated into a thin film on the Ti foil by the doctor blade technique, followed by annealing at 390 °C to obtain the flexible PtNP/MWCNT hybrid CE. The solar-to-electricity conversion efficiency (η) of a DSSC with the flexible PtNP/MWCNT hybrid CE gave a higher value of 9.04% in comparison to that of the cell with a conventional Pt CE (η = 7.47%). A rougher surface morphology of the nanohybrid film precisely controlled by the configuration of MWCNT was obtained, with reference to that of a Pt-sputtered film. The PtNP/MWCNT hybrid film was physically characterized by scanning electron microscopy, atomic force microscopy, and transmission electron microscopy. Cyclic voltammetry, incident-photon-to-current efficiency, and electrochemical impedance spectra were examined for confirming the high electro-catalytic ability of this flexible PtNP/MWCNT hybrid CE.

[1]  Jianyong Ouyang,et al.  Conducting polymer/carbon nanotube composite as counter electrode of dye-sensitized solar cells , 2008 .

[2]  Qing Wang,et al.  Highly Efficient Dye-Sensitized Solar Cells Based on Carbon Black Counter Electrodes , 2006 .

[3]  Qiquan Qiao,et al.  Dye-sensitized solar cells based on low cost nanoscale carbon/TiO2 composite counter electrode , 2009 .

[4]  Tsutomu Miyasaka,et al.  Low-Temperature Fabrication of Dye-Sensitized Plastic Electrodes by Electrophoretic Preparation of Mesoporous TiO2 Layers , 2004 .

[5]  Pulickel M. Ajayan,et al.  Fast Electron Transfer Kinetics on Multiwalled Carbon Nanotube Microbundle Electrodes , 2001 .

[6]  Richard G Compton,et al.  Electrocatalysis at graphite and carbon nanotube modified electrodes: edge-plane sites and tube ends are the reactive sites. , 2005, Chemical communications.

[7]  Michael Grätzel,et al.  Conversion of sunlight to electric power by nanocrystalline dye-sensitized solar cells , 2004 .

[8]  Yanhong Luo,et al.  Application of carbon materials as counter electrodes of dye-sensitized solar cells , 2007 .

[9]  Wenjing Hong,et al.  Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cells , 2008 .

[10]  Koichi Kobayashi,et al.  Enhanced performance of a dye-sensitized solar cell with a modified poly(3,4-ethylenedioxythiophene)/TiO2/FTO counter electrode , 2009 .

[11]  Man Gu Kang,et al.  Fabrication of an Efficient Dye-Sensitized Solar Cell with Stainless Steel Substrate , 2008 .

[12]  Man Gu Kang,et al.  A 4.2% efficient flexible dye-sensitized TiO2 solar cells using stainless steel substrate , 2006 .

[13]  Wei Xing,et al.  Application of mesoporous carbon to counter electrode for dye-sensitized solar cells , 2009 .

[14]  T. Umeyama,et al.  Carbon nanotube-modified electrodes for solar energy conversion , 2008 .

[15]  Michael Grätzel,et al.  Applications of functionalized transition metal complexes in photonic and optoelectronic devices , 1998 .

[16]  N. Papageorgiou,et al.  Counter-electrode function in nanocrystalline photoelectrochemical cell configurations , 2004 .

[17]  Mohammad Khaja Nazeeruddin,et al.  High-efficiency (7.2%) flexible dye-sensitized solar cells with Ti-metal substrate for nanocrystalline-TiO2 photoanode. , 2006, Chemical communications.

[18]  Seasoning effect of dye-sensitized solar cells with different counter electrodes , 2006 .

[19]  K. Ho,et al.  A high-performance counter electrode based on poly(3,4-alkylenedioxythiophene) for dye-sensitized solar cells , 2009 .

[20]  Yanhong Luo,et al.  A flexible carbon counter electrode for dye-sensitized solar cells , 2009 .

[21]  Andreas Georg,et al.  Diffusion in the electrolyte and charge-transfer reaction at the platinum electrode in dye-sensitized solar cells , 2001 .

[22]  Ryuji Kikuchi,et al.  Impedance analysis for dye-sensitized solar cells with a three-electrode system , 2005 .

[23]  B. Hong,et al.  A comparative study of dye-sensitized solar cells added carbon nanotubes to electrolyte and counter electrodes , 2010 .

[24]  M. Grätzel.  Dye-sensitized solar cells , 2003 .

[25]  Jaesung Song,et al.  Nanocarbon counterelectrode for dye sensitized solar cells , 2007 .

[26]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[27]  Yanhong Luo,et al.  Low temperature fabrication of efficient porous carbon counter electrode for dye-sensitized solar cells , 2009 .

[28]  K. Ho,et al.  Using modified poly(3,4-ethylene dioxythiophene): Poly(styrene sulfonate) film as a counter electrode in dye-sensitized solar cells , 2007 .

[29]  W. Pan,et al.  Dramatic effect of multiwalled carbon nanotubes on the electrical properties of alumina based ceramic nanocomposites , 2009 .

[30]  T. Chou,et al.  Carbon Nanotube Networks: Sensing of Distributed Strain and Damage for Life Prediction and Self Healing , 2006 .

[31]  J. Bisquert,et al.  Internal Reference Electrode in Dye Sensitized Solar Cells for Three-Electrode Electrochemical Characterizations , 2003 .